chore: snapshot before shared RS485 bus integration

README.md

@@ -1,85 +1,180 @@
-![ESP32 EVSE](https://github.com/dzurikmiroslav/esp32-evse/wiki/images/logo-full.svg)
+# ChargeFlow EVSE Firmware (ESP32, ESP-IDF 5.x)
 
-J1772 EVSE firmware for ESP32 based devices.
+Firmware for an AC EVSE (EV charger) based on ESP32 and ESP-IDF 5.x, with:
 
-![Build with ESP-IDF](https://github.com/dzurikmiroslav/esp32-evse/workflows/Build%20with%20ESP-IDF/badge.svg)
+- IEC-style EVSE state machine (Control Pilot A/B/C/D)
-[![License](https://img.shields.io/github/license/dzurikmiroslav/esp32-evse.svg)](LICENSE.md)
+- Wi-Fi (STA + AP for local configuration)
+- REST API served from SPIFFS
+- Local authentication and OCPP integration
+- Load balancing (master + slaves)
+- Scheduler (time windows)
+- Audible feedback (buzzer) and RGB LED status
+- On-device ring-buffer logger
 
-## Key features
+---
- - Hardware abstraction for device design
- - Responsive web-interface
-- OTA update
-- Integrated energy meter
-- Energy detection for relay control
-- [REST](https://github.com/dzurikmiroslav/esp32-evse/wiki/Rest) API
- - MQTT API
- - [Modbus](https://github.com/dzurikmiroslav/esp32-evse/wiki/Modbus) (RS485, TCP)
- - [Scripting](https://github.com/dzurikmiroslav/esp32-evse/wiki/Script)
- - [Nextion HMI](https://github.com/dzurikmiroslav/esp32-evse/wiki/Nextion)
 
-### Device definition method
+## Features
 
-_One firmware to rule them all._ Not really :-) one per device platform (ESP32, ESP32-S2...).
+### Core EVSE
 
-There is no need to compile the firmware for your EVSE design.
+- EVSE manager (`evse_manager`) coordinating:
-Source code ist not hardcoded to GPIOs or other hardware design features.
+  - Hardware layer (`evse_hardware`)
-All code is written in ESP-IDF without additional mapping layer like Arduino.
+  - State machine (`evse_state`)
+  - Error handling (`evse_error`)
+  - Energy metering (`evse_meter` / `meter_manager`)
+  - Session tracking (`evse_session`)
+- Runs a periodic tick (`evse_manager_tick()`) in its own FreeRTOS task.
+- Supports multiple auth modes (OPEN / RFID / OCPP), with scheduling and load-balancer aware logic.
 
-All configuration is written outside firmware in configuration file named _board.cfg_ on dedicated partition.
+### Networking & REST
-For example, on following scheme is minimal EVSE circuit with ESP32 devkit.
 
-![Minimal circuit](https://github.com/dzurikmiroslav/esp32-evse/wiki/images/minimal-circuit.png)
+- Wi-Fi:
+  - Station mode for normal operation.
+  - Access point mode for local configuration, enabled by a physical button.
+- REST server (`rest_main`) serving from `/data` SPIFFS mount:
+  - For configuration, status, logs, etc. (exact endpoints depend on your REST implementation).
 
-For this circuit there is _board.cfg_, for more information's see [Wiki](https://github.com/dzurikmiroslav/esp32-evse/wiki/Board-config).
+### Button & User Input
 
+- One physical button (configured via `board_config`):
+  - **Short press** → Starts Wi-Fi AP mode for configuration.
+  - **Long press (~30s)** → Erases NVS and reboots (factory-like reset).
+- Robust handling:
+  - ISR with software debounce and spinlock.
+  - Dedicated `user_input_task` that receives button press/release notifications via `xTaskNotify`.
 
-```bash
+### Storage
-#Device name
-DEVICE_NAME=ESP32 minimal EVSE
-#Button
-BUTTON_WIFI_GPIO=0
-#Pilot  
-PILOT_PWM_GPIO=33
-PILOT_ADC_CHANNEL=7
-PILOT_DOWN_THRESHOLD_12=2410
-PILOT_DOWN_THRESHOLD_9=2104
-PILOT_DOWN_THRESHOLD_6=1797
-PILOT_DOWN_THRESHOLD_3=1491
-PILOT_DOWN_THRESHOLD_N12=265
-#AC relay
-AC_RELAY_GPIO=32
-```
 
-### Web interface
+- SPIFFS used for:
+  - `/cfg` partition: persistent configuration.
+  - `/data` partition: web assets, runtime data, logs, etc.
+- Two separate mounts:
+  - `cfg_conf` → `/cfg` (label: `cfg`)
+  - `data_conf` → `/data` (label: `data`)
 
-Fully responsive web interface is accessible local network IP address on port 80.
+### LED Subsystem
 
-Dashboard page
+- RGB LED driven by LEDC:
+  - `ledc_driver` abstracts LEDC timer + channels.
+  - `led` module maps EVSE state & sessions to colors/patterns.
+- LED patterns per EVSE state:
+  - **IDLE** → Green solid.
+  - **WAITING** (vehicle plugged, not charging) → Blue slow blink.
+  - **CHARGING** → Blue “breathing” effect.
+  - **FAULT** → Red fast blink.
+- Session effects:
+  - Distinct visual patterns when a session starts/finishes.
+  - Uses a one-shot timer and a dedicated effect state machine.
 
-![Dashboard](https://github.com/dzurikmiroslav/esp32-evse/wiki/images/web-dashboard.png) 
+### Buzzer
 
-Settings page
+- Buzzer with multiple patterns (`buzzer` + `buzzer_events`):
+  - Plugged/unplugged, card read/denied, AP start, charging, fault, etc.
+- Supported modes:
+  - Active buzzer (ON/OFF).
+  - Passive buzzer with LEDC PWM (frequency & duty configurable).
+- Features:
+  - Central queue + dedicated `buzzer_task`.
+  - Quiet hours support (optionally suppress non-critical sounds at night).
+  - Anti-spam mechanism to avoid excessively frequent beeps.
+  - Integrated with:
+    - EVSE events (state changes & faults)
+    - Auth events (RFID card success/denied/added)
+    - Network events (AP/STA up)
 
-![Settings](https://github.com/dzurikmiroslav/esp32-evse/wiki/images/web-settings.png)
+### Load Balancer
 
-Mobile dashboard page
+- `loadbalancer` component:
+  - Monitors GRID meter and EVSE meter via `meter_events`.
+  - Supports one master + up to 255 slaves (connectors array).
+  - Fair distribution of current with:
+    - Headroom calculation based on grid limit and measured current.
+    - Min current guarantees (e.g. 6 A) using a “water-filling” algorithm.
+    - Session-age based priority (oldest sessions first).
+    - Per-connector hysteresis and LB suspension/resume flags.
+  - Publishes limits via `LOADBALANCER_EVENTS`:
+    - `LOADBALANCER_EVENT_MASTER_CURRENT_LIMIT`
+    - `LOADBALANCER_EVENT_SLAVE_CURRENT_LIMIT`
+- Fail-safe behavior:
+  - If GRID meter data times out, clamps connectors to minimum safe current instead of ramping up.
 
-![Dashboard mobile](https://github.com/dzurikmiroslav/esp32-evse/wiki/images/web-dashboard-mobile.png)
+### Scheduler
 
-## Hardware
+- Scheduler component (`scheduler`) emits `SCHED_EVENTS` with `allowed_now` flag:
+  - EVSE manager revokes authorization when the window closes.
+  - In OPEN mode, automatic re-authorization only happens when scheduler allows.
 
-### ESP32DevkitC
+### OCPP
 
-Dev board with basic functionality, single phase energy meter, RS485. One side pcb, for DIY makers easy to make at home conditions ;-)
+- `ocpp` module integration:
+  - Listens to OCPP events (`OCPP_EVENTS`).
+  - Handles:
+    - RemoteStart/Stop
+    - Authorization results
+    - ChangeAvailability (operative/inoperative) → mapped into local `enabled` config.
+  - EVSE manager mediates OCPP decisions with scheduler + load balancer.
 
-[EasyEDA project](https://oshwlab.com/dzurik.miroslav/esp32-devkit-evse)
+### Logger
 
-![ESP32DevkitC](https://github.com/dzurikmiroslav/esp32-evse/wiki/images/esp32devkitc.jpg)
+- `logger` + `output_buffer` components:
+  - Central log sink with ring buffer in RAM.
+  - Thread-safe via FreeRTOS mutex.
+  - Integrated with ESP log system via `esp_log_set_vprintf(logger_vprintf);`
+    - Optionally mirrors to UART (controlled via `CONFIG_ESP_CONSOLE_UART`).
+  - Simple reader API:
+    - Iterate entries using an index.
+    - Handy for exposing logs over REST/Web UI.
 
-### ESP32-S2 DIY ALPHA
+---
 
-ESP32-S2 based EVSE with advanced functionality, three phase energy meter, RS485, UART, 1WIRE, RCM, socket lock.
+## Project Structure (Relevant Parts)
 
-[EasyEDA project](https://oshwlab.com/dzurik.miroslav/esp32s2-diy-evse)
+Approximate layout (names may vary slightly in your repo):
 
-![ESP32-S2-DA](https://github.com/dzurikmiroslav/esp32-evse/wiki/images/esp32s2da.jpg)
+```text
+main/
+  main.c                # System entrypoint, button setup, module init
+
+components/
+  evse/
+    evse_manager.c/.h   # High-level EVSE orchestration
+    evse_state.c/.h     # State machine & events
+    evse_error.c/.h     # Error handling
+    evse_hardware.c/.h  # Hardware abstraction
+    evse_session.c/.h   # Session metrics
+
+  loadbalancer/
+    src/
+      loadbalancer.c
+      loadbalancer_events.c
+      input_filter.c
+    include/
+      loadbalancer.h
+      loadbalancer_events.h
+      input_filter.h
+
+  buzzer/
+    src/
+      buzzer.c
+      buzzer_events.c
+    include/
+      buzzer.h
+      buzzer_events.h
+
+  led/
+    src/
+      led.c
+      ledc_driver.c
+    include/
+      led.h
+      ledc_driver.h
+
+  logger/
+    src/
+      logger.c
+      output_buffer.c
+    include/
+      logger.h
+      output_buffer.h
+
+  # ... other modules: auth, ocpp, scheduler, meter_manager, evse_link, etc.

cfg/esp32devkitc/board.cfg

@@ -1,32 +1,115 @@
+# ChargeFlow board.cfg
+# ------------------------------------------------------------
+# Este ficheiro suporta duas variantes de hardware:
+#
+# 1) Board antiga  -> Pilot no ADC interno do ESP32
+# 2) Board recente -> Pilot no ADC externo ADC121S021
+#
+# Para mudar de board, alterar apenas a secção "SELEÇÃO DE PERFIL".
+# As restantes opções são comuns às duas boards.
+#
+# IMPORTANTE:
+# - Não deixar duas linhas iguais ativas ao mesmo tempo.
+# - Linhas começadas por # são comentários.
+# - Na board com ADC externo, PILOT_ADC_SOURCE pode ser omitido,
+#   porque o firmware usa ADC121S021 por defeito.
+# ------------------------------------------------------------
+
+
+# ============================================================
+# SELEÇÃO DE PERFIL
+# ============================================================
+
+# ------------------------------------------------------------
+# PERFIL ATIVO: Board antiga com ADC interno ESP32
+# ------------------------------------------------------------
+#led_red_GPIO=13
+#BUZZER_GPIO=21
+#PILOT_ADC_SOURCE=internal
+
+# ------------------------------------------------------------
+# PERFIL ALTERNATIVO: Board recente com ADC externo ADC121S021
+# Para usar esta board:
+#   1. Comentar as 3 linhas do perfil ativo acima
+#   2. Descomentar as 3 linhas abaixo
+# ------------------------------------------------------------
+led_red_GPIO=26
+BUZZER_GPIO=27
+PILOT_ADC_SOURCE=adc121
+
+
+# ============================================================
+# CONFIGURAÇÃO COMUM
+# ============================================================
+
 DEVICE_NAME=ChargeFlow
 
-#LEDs
+
+# ------------------------------------------------------------
+# LEDs
+# ------------------------------------------------------------
 led_blue=y
 led_blue_GPIO=14
+
 led_red=y
-led_red_GPIO=26
+# led_red_GPIO é definido na SELEÇÃO DE PERFIL
+
 led_green=y
 led_green_GPIO=12
 
-#BUZZER
-BUZZER=y
-BUZZER_GPIO=27
 
-#Button
+# ------------------------------------------------------------
+# BUZZER
+# ------------------------------------------------------------
+BUZZER=y
+# BUZZER_GPIO é definido na SELEÇÃO DE PERFIL
+
+
+# ------------------------------------------------------------
+# Botão Wi-Fi
+# ------------------------------------------------------------
 BUTTON_WIFI_GPIO=32
 
-#Pilot  
+
+# ------------------------------------------------------------
+# Pilot / Control Pilot
+# ------------------------------------------------------------
+# PILOT_ADC_SOURCE é definido na SELEÇÃO DE PERFIL.
+#
+# Valores possíveis:
+#   internal -> usa ADC interno do ESP32
+#   adc121   -> usa ADC externo ADC121S021
+#
+# Board antiga:
+#   PILOT_ADC_SOURCE=internal
+#
+# Board recente:
+#   PILOT_ADC_SOURCE=adc121
+#   ou omitir a linha, porque o default do firmware é ADC121S021.
+#
+# Nota:
+#   PILOT_ADC_CHANNEL é canal ADC, não GPIO.
+#   Em ESP32 clássico, ADC1_CH6 normalmente corresponde ao GPIO34.
+# ------------------------------------------------------------
 PILOT_PWM_GPIO=33
 PILOT_ADC_CHANNEL=6
+
+# Thresholds em mV no pino ADC/saída do circuito de medição
 PILOT_DOWN_THRESHOLD_12=3000
 PILOT_DOWN_THRESHOLD_9=2600
 PILOT_DOWN_THRESHOLD_6=2200
 PILOT_DOWN_THRESHOLD_3=1950
 PILOT_DOWN_THRESHOLD_N12=500
 
-#Proximity
+
+# ------------------------------------------------------------
+# Proximity
+# ------------------------------------------------------------
 PROXIMITY=y
+
+# Em ESP32 clássico, ADC1_CH3 normalmente corresponde ao GPIO39.
 PROXIMITY_ADC_CHANNEL=3
+
 PROXIMITY_DOWN_THRESHOLD_8=2450
 PROXIMITY_DOWN_THRESHOLD_10=2050
 PROXIMITY_DOWN_THRESHOLD_13=1650
@@ -34,11 +117,20 @@ PROXIMITY_DOWN_THRESHOLD_20=820
 PROXIMITY_DOWN_THRESHOLD_25=610
 PROXIMITY_DOWN_THRESHOLD_32=430
 
-#AC relay
+
+# ------------------------------------------------------------
+# Relé AC
+# ------------------------------------------------------------
 AC_RELAY_GPIO=25
 
-#Cable lock
+
+# ------------------------------------------------------------
+# Cable lock
+# ------------------------------------------------------------
 SOCKET_LOCK=n
+
+# Como SOCKET_LOCK=n, estes GPIOs podem ficar vazios.
+# Se SOCKET_LOCK=y, preencher sempre valores válidos.
 SOCKET_LOCK_A_GPIO=
 SOCKET_LOCK_B_GPIO=
-SOCKET_LOCK_DETECTION_GPIO=
+SOCKET_LOCK_DETECTION_GPIO=

components/auth/CMakeLists.txt

@@ -3,5 +3,5 @@ set(srcs "src/auth_types.c" "src/auth.c" "src/wiegand.c" "src/wiegand_reader.c"
 idf_component_register(SRCS "${srcs}"
                     INCLUDE_DIRS "include"
                     PRIV_INCLUDE_DIRS "src"
-                    PRIV_REQUIRES nvs_flash driver esp_timer
+                    PRIV_REQUIRES driver esp_timer
-                    REQUIRES esp_event evse ocpp evse_link)
+                    REQUIRES esp_event evse ocpp evse_link storage_service)

components/auth/src/auth.c

@@ -4,19 +4,22 @@
 
 #include <freertos/FreeRTOS.h>
 #include <freertos/queue.h>
+#include <freertos/task.h>
 
 #include <esp_log.h>
+#include <esp_err.h>
 #include <string.h>
-#include <strings.h> // strcasecmp
+#include <strings.h>
+#include <stdio.h>
+
 #include "wiegand_reader.h"
-#include "nvs_flash.h"
+
-#include "nvs.h"
+#include "storage_service.h"
 
 #include "evse_link.h"
 #include "evse_link_events.h"
 
 #define MAX_TAGS 50
-
 static const char *TAG = "Auth";
 
 /* ===== Estado ===== */
@@ -25,162 +28,16 @@ static bool waiting_for_registration = false;
 static char valid_tags[MAX_TAGS][AUTH_TAG_MAX_LEN];
 static int tag_count = 0;
 static uint32_t s_next_req_id = 1;
-static bool s_wiegand_started = false; // controla se o Wiegand já foi iniciado
+static bool s_wiegand_started = false;
 
-/* ===== NVS keys ===== */
+/* ===== Storage keys ===== */
 #define NVS_NAMESPACE "auth"
 #define NVS_TAG_PREFIX "tag_"
 #define NVS_TAG_COUNT_KEY "count"
 #define NVS_MODE_KEY "mode" // uint8_t
 
-/* =========================
+// timeout para operações sync do storage
- * NVS Persistence (tags)
+#define STORAGE_TO pdMS_TO_TICKS(2000)
- * ========================= */
-static void load_tags_from_nvs(void)
-{
-    nvs_handle_t handle;
-    esp_err_t err = nvs_open(NVS_NAMESPACE, NVS_READONLY, &handle);
-    if (err != ESP_OK)
-    {
-        ESP_LOGW(TAG, "No stored tags in NVS (nvs_open: %s)", esp_err_to_name(err));
-        return;
-    }
-
-    uint8_t count = 0;
-    err = nvs_get_u8(handle, NVS_TAG_COUNT_KEY, &count);
-    if (err != ESP_OK)
-    {
-        ESP_LOGW(TAG, "No tag count key in NVS (nvs_get_u8: %s)", esp_err_to_name(err));
-        nvs_close(handle);
-        return;
-    }
-
-    tag_count = 0;
-    for (int i = 0; i < count && i < MAX_TAGS; i++)
-    {
-        char key[16];
-        char tag_buf[AUTH_TAG_MAX_LEN];
-        size_t len = sizeof(tag_buf);
-
-        snprintf(key, sizeof(key), "%s%d", NVS_TAG_PREFIX, i);
-        err = nvs_get_str(handle, key, tag_buf, &len);
-        if (err == ESP_OK)
-        {
-            strncpy(valid_tags[tag_count], tag_buf, AUTH_TAG_MAX_LEN - 1);
-            valid_tags[tag_count][AUTH_TAG_MAX_LEN - 1] = '\0';
-            tag_count++;
-        }
-        else
-        {
-            ESP_LOGW(TAG, "Failed to load tag %d from NVS (%s)", i, esp_err_to_name(err));
-        }
-    }
-
-    nvs_close(handle);
-    ESP_LOGI(TAG, "Loaded %d tags from NVS", tag_count);
-}
-
-static void save_tags_to_nvs(void)
-{
-    nvs_handle_t handle;
-    esp_err_t err = nvs_open(NVS_NAMESPACE, NVS_READWRITE, &handle);
-    if (err != ESP_OK)
-    {
-        ESP_LOGE(TAG, "Failed to open NVS to save tags: %s", esp_err_to_name(err));
-        return;
-    }
-
-    err = nvs_set_u8(handle, NVS_TAG_COUNT_KEY, tag_count);
-    if (err != ESP_OK)
-    {
-        ESP_LOGE(TAG, "nvs_set_u8(count) failed: %s", esp_err_to_name(err));
-        nvs_close(handle);
-        return;
-    }
-
-    for (int i = 0; i < tag_count; i++)
-    {
-        char key[16];
-        snprintf(key, sizeof(key), "%s%d", NVS_TAG_PREFIX, i);
-        err = nvs_set_str(handle, key, valid_tags[i]);
-        if (err != ESP_OK)
-        {
-            ESP_LOGE(TAG, "nvs_set_str(%s) failed: %s", key, esp_err_to_name(err));
-            nvs_close(handle);
-            return;
-        }
-    }
-
-    err = nvs_commit(handle);
-    if (err != ESP_OK)
-    {
-        ESP_LOGE(TAG, "nvs_commit failed when saving tags: %s", esp_err_to_name(err));
-        nvs_close(handle);
-        return;
-    }
-
-    nvs_close(handle);
-    ESP_LOGI(TAG, "Tags saved to NVS (%d tags)", tag_count);
-}
-
-/* =========================
- * NVS Persistence (mode)
- * ========================= */
-static void load_mode_from_nvs(void)
-{
-    nvs_handle_t h;
-    esp_err_t err = nvs_open(NVS_NAMESPACE, NVS_READONLY, &h);
-    if (err == ESP_OK)
-    {
-        uint8_t u = (uint8_t)AUTH_MODE_OPEN;
-        err = nvs_get_u8(h, NVS_MODE_KEY, &u);
-        if (err == ESP_OK)
-        {
-            if (u <= (uint8_t)AUTH_MODE_OCPP_RFID)
-                s_mode = (auth_mode_t)u;
-        }
-        else
-        {
-            ESP_LOGW(TAG, "No stored auth mode in NVS (nvs_get_u8: %s). Default OPEN", esp_err_to_name(err));
-        }
-        nvs_close(h);
-    }
-    else
-    {
-        ESP_LOGW(TAG, "No stored auth mode in NVS (nvs_open: %s). Default OPEN", esp_err_to_name(err));
-    }
-    ESP_LOGI(TAG, "Loaded mode = %d (%s)", (int)s_mode, auth_mode_to_str(s_mode));
-}
-
-static void save_mode_to_nvs(auth_mode_t mode)
-{
-    nvs_handle_t h;
-    esp_err_t err = nvs_open(NVS_NAMESPACE, NVS_READWRITE, &h);
-    if (err != ESP_OK)
-    {
-        ESP_LOGE(TAG, "Failed to open NVS to save auth mode: %s", esp_err_to_name(err));
-        return;
-    }
-
-    err = nvs_set_u8(h, NVS_MODE_KEY, (uint8_t)mode);
-    if (err != ESP_OK)
-    {
-        ESP_LOGE(TAG, "nvs_set_u8(mode) failed: %s", esp_err_to_name(err));
-        nvs_close(h);
-        return;
-    }
-
-    err = nvs_commit(h);
-    if (err != ESP_OK)
-    {
-        ESP_LOGE(TAG, "nvs_commit failed when saving mode: %s", esp_err_to_name(err));
-        nvs_close(h);
-        return;
-    }
-
-    nvs_close(h);
-    ESP_LOGI(TAG, "Saved mode = %d (%s)", (int)mode, auth_mode_to_str(mode));
-}
 
 /* =========================
  * Helpers
@@ -190,37 +47,155 @@ static bool is_tag_valid(const char *tag)
     for (int i = 0; i < tag_count; i++)
     {
         if (strncmp(valid_tags[i], tag, AUTH_TAG_MAX_LEN) == 0)
-        {
             return true;
-        }
     }
     return false;
 }
 
+/* =========================
+ * Storage Persistence (tags)
+ * ========================= */
+static void load_tags_from_storage(void)
+{
+    uint8_t count = 0;
+    esp_err_t err = storage_get_u8_sync(NVS_NAMESPACE, NVS_TAG_COUNT_KEY, &count, STORAGE_TO);
+    if (err == ESP_ERR_NOT_FOUND)
+    {
+        ESP_LOGD(TAG, "No stored tags (count not found)");
+        tag_count = 0;
+        return;
+    }
+    if (err != ESP_OK)
+    {
+        ESP_LOGW(TAG, "Failed to read tag count (%s)", esp_err_to_name(err));
+        tag_count = 0;
+        return;
+    }
+
+    tag_count = 0;
+    for (int i = 0; i < (int)count && i < MAX_TAGS; i++)
+    {
+        char key[16];
+        char tag_buf[AUTH_TAG_MAX_LEN] = {0};
+
+        snprintf(key, sizeof(key), "%s%d", NVS_TAG_PREFIX, i);
+
+        err = storage_get_str_sync(NVS_NAMESPACE, key, tag_buf, sizeof(tag_buf), STORAGE_TO);
+        if (err == ESP_OK)
+        {
+            if (tag_buf[0] != '\0')
+            {
+                strncpy(valid_tags[tag_count], tag_buf, AUTH_TAG_MAX_LEN - 1);
+                valid_tags[tag_count][AUTH_TAG_MAX_LEN - 1] = '\0';
+                tag_count++;
+            }
+        }
+        else if (err == ESP_ERR_NOT_FOUND)
+        {
+            // pode acontecer se count estiver desfasado; ignora
+            continue;
+        }
+        else
+        {
+            ESP_LOGW(TAG, "Failed to load tag %d (%s)", i, esp_err_to_name(err));
+        }
+    }
+
+    ESP_LOGI(TAG, "Loaded %d tags from storage", tag_count);
+}
+
+static void save_tags_to_storage(void)
+{
+    // ler count antigo (para apagar keys antigas se removemos tags)
+    uint8_t old_count = 0;
+    esp_err_t err = storage_get_u8_sync(NVS_NAMESPACE, NVS_TAG_COUNT_KEY, &old_count, STORAGE_TO);
+    if (err == ESP_ERR_NOT_FOUND)
+        old_count = 0;
+
+    // grava count + tags
+    (void)storage_set_u8_async(NVS_NAMESPACE, NVS_TAG_COUNT_KEY, (uint8_t)tag_count);
+
+    for (int i = 0; i < tag_count; i++)
+    {
+        char key[16];
+        snprintf(key, sizeof(key), "%s%d", NVS_TAG_PREFIX, i);
+        (void)storage_set_str_async(NVS_NAMESPACE, key, valid_tags[i]);
+    }
+
+    // se removemos tags: apagar chaves antigas
+    if (old_count > (uint8_t)tag_count)
+    {
+        for (int i = tag_count; i < (int)old_count && i < MAX_TAGS; i++)
+        {
+            char key[16];
+            snprintf(key, sizeof(key), "%s%d", NVS_TAG_PREFIX, i);
+            (void)storage_erase_key_async(NVS_NAMESPACE, key);
+        }
+    }
+
+    // opcional: forçar commit “já”
+    (void)storage_flush_async();
+
+    ESP_LOGD(TAG, "Tags saved to storage (%d tags)", tag_count);
+}
+
+/* =========================
+ * Storage Persistence (mode)
+ * ========================= */
+static void load_mode_from_storage(void)
+{
+    uint8_t u = (uint8_t)AUTH_MODE_OPEN;
+    esp_err_t err = storage_get_u8_sync(NVS_NAMESPACE, NVS_MODE_KEY, &u, STORAGE_TO);
+
+    if (err == ESP_OK)
+    {
+        if (u <= (uint8_t)AUTH_MODE_OCPP_RFID)
+            s_mode = (auth_mode_t)u;
+        else
+            s_mode = AUTH_MODE_OPEN;
+    }
+    else if (err == ESP_ERR_NOT_FOUND)
+    {
+        s_mode = AUTH_MODE_OPEN;
+        ESP_LOGD(TAG, "No stored mode -> default OPEN");
+    }
+    else
+    {
+        s_mode = AUTH_MODE_OPEN;
+        ESP_LOGW(TAG, "Failed to read mode (%s) -> default OPEN", esp_err_to_name(err));
+    }
+
+    ESP_LOGI(TAG, "Loaded mode = %d (%s)", (int)s_mode, auth_mode_to_str(s_mode));
+}
+
+static void save_mode_to_storage(auth_mode_t mode)
+{
+    (void)storage_set_u8_async(NVS_NAMESPACE, NVS_MODE_KEY, (uint8_t)mode);
+    (void)storage_flush_async(); // opcional: commit mais rápido
+    ESP_LOGD(TAG, "Saved mode = %d (%s)", (int)mode, auth_mode_to_str(mode));
+}
+
 /* =========================
  * Bridge: EVSE-Link -> AUTH (remote AUTH_GRANTED no slave)
  * ========================= */
 static void on_remote_auth_grant(void *arg, esp_event_base_t base, int32_t id, void *data)
 {
+    (void)arg;
+
     if (base != EVSE_LINK_EVENTS || id != LINK_EVENT_REMOTE_AUTH_GRANTED || data == NULL)
-    {
         return;
-    }
 
     const evse_link_auth_grant_event_t *src = (const evse_link_auth_grant_event_t *)data;
 
-    // Só faz sentido em SLAVE; em MASTER este evento não deve aparecer
     if (evse_link_get_mode() != EVSE_LINK_MODE_SLAVE)
-    {
         return;
-    }
 
     auth_tag_event_data_t ev = {0};
     strncpy(ev.tag, src->tag, AUTH_TAG_MAX_LEN - 1);
     ev.tag[AUTH_TAG_MAX_LEN - 1] = '\0';
     ev.authorized = true;
 
-    ESP_LOGI(TAG, "Remote auth grant on SLAVE for tag=%s", ev.tag);
+    ESP_LOGD(TAG, "Remote auth grant on SLAVE for tag=%s", ev.tag);
 
     esp_err_t err = esp_event_post(
         AUTH_EVENTS,
@@ -241,8 +216,11 @@ static void on_remote_auth_grant(void *arg, esp_event_base_t base, int32_t id, v
  * ========================= */
 void auth_init(void)
 {
-    load_mode_from_nvs();
+    // garantir que o storage service está pronto
-    load_tags_from_nvs();
+    ESP_ERROR_CHECK(storage_service_init());
+
+    load_mode_from_storage();
+    load_tags_from_storage();
 
     bool need_wiegand = (s_mode == AUTH_MODE_LOCAL_RFID || s_mode == AUTH_MODE_OCPP_RFID);
     if (need_wiegand)
@@ -256,7 +234,7 @@ void auth_init(void)
         ESP_LOGI(TAG, "Mode OPEN: Wiegand not started");
     }
 
-    // Registar bridge para autorizações remotas vindas do EVSE-Link
+    // bridge EVSE-Link -> AUTH
     {
         esp_err_t err = esp_event_handler_register(
             EVSE_LINK_EVENTS,
@@ -285,44 +263,34 @@ void auth_set_mode(auth_mode_t mode)
 
     if (mode == s_mode)
     {
-        ESP_LOGI(TAG, "Mode unchanged: %s", auth_mode_to_str(mode));
+        ESP_LOGD(TAG, "Mode unchanged: %s", auth_mode_to_str(mode));
         return;
     }
 
     auth_mode_t old = s_mode;
     s_mode = mode;
-    save_mode_to_nvs(mode);
+    save_mode_to_storage(mode);
 
     bool need_wiegand = (s_mode == AUTH_MODE_LOCAL_RFID || s_mode == AUTH_MODE_OCPP_RFID);
 
     if (need_wiegand && !s_wiegand_started)
     {
-        ESP_LOGI(TAG, "Mode changed %s -> %s, starting Wiegand",
+        ESP_LOGD(TAG, "Mode changed %s -> %s, starting Wiegand",
                  auth_mode_to_str(old), auth_mode_to_str(s_mode));
         initWiegand();
         s_wiegand_started = true;
     }
     else if (!need_wiegand && s_wiegand_started)
     {
-        // Aqui poderias implementar um wiegand_deinit() se o driver o expuser.
+        ESP_LOGD(TAG, "Mode changed %s -> %s, Wiegand remains started (no deinit implemented)",
-        ESP_LOGI(TAG, "Mode changed %s -> %s, Wiegand remains started (no deinit implemented)",
                  auth_mode_to_str(old), auth_mode_to_str(s_mode));
     }
     else
     {
-        ESP_LOGI(TAG, "Mode changed %s -> %s, no change in Wiegand state",
+        ESP_LOGD(TAG, "Mode changed %s -> %s, no change in Wiegand state",
                  auth_mode_to_str(old), auth_mode_to_str(s_mode));
     }
 
-    if (s_mode == AUTH_MODE_OPEN)
-    {
-        ESP_LOGI(TAG, "Mode set to OPEN");
-    }
-    else
-    {
-        ESP_LOGI(TAG, "Mode set to %s", auth_mode_to_str(s_mode));
-    }
-
     auth_mode_event_data_t evt = {.mode = s_mode};
     esp_event_post(AUTH_EVENTS, AUTH_EVENT_MODE_CHANGED, &evt, sizeof(evt), portMAX_DELAY);
 }
@@ -338,15 +306,16 @@ bool auth_add_tag(const char *tag)
         return false;
     if (tag_count >= MAX_TAGS)
         return false;
+
     if (is_tag_valid(tag))
-        return true; // já existe
+        return true;
 
     strncpy(valid_tags[tag_count], tag, AUTH_TAG_MAX_LEN - 1);
     valid_tags[tag_count][AUTH_TAG_MAX_LEN - 1] = '\0';
     tag_count++;
 
-    save_tags_to_nvs();
+    save_tags_to_storage();
-    ESP_LOGI(TAG, "Tag added: %s", tag);
+    ESP_LOGD(TAG, "Tag added: %s", tag);
     return true;
 }
 
@@ -366,8 +335,8 @@ bool auth_remove_tag(const char *tag)
             }
             tag_count--;
 
-            save_tags_to_nvs();
+            save_tags_to_storage();
-            ESP_LOGI(TAG, "Tag removed: %s", tag);
+            ESP_LOGD(TAG, "Tag removed: %s", tag);
             return true;
         }
     }
@@ -383,11 +352,9 @@ bool auth_tag_exists(const char *tag)
 
 void auth_list_tags(void)
 {
-    ESP_LOGI(TAG, "Registered Tags (%d):", tag_count);
+    ESP_LOGD(TAG, "Registered Tags (%d):", tag_count);
     for (int i = 0; i < tag_count; i++)
-    {
+        ESP_LOGD(TAG, "- %s", valid_tags[i]);
-        ESP_LOGI(TAG, "- %s", valid_tags[i]);
-    }
 }
 
 void auth_wait_for_tag_registration(void)
@@ -398,7 +365,7 @@ void auth_wait_for_tag_registration(void)
         return;
     }
     waiting_for_registration = true;
-    ESP_LOGI(TAG, "Tag registration mode enabled.");
+    ESP_LOGD(TAG, "Tag registration mode enabled.");
 }
 
 void auth_process_tag(const char *tag)
@@ -412,11 +379,8 @@ void auth_process_tag(const char *tag)
     switch (s_mode)
     {
     case AUTH_MODE_OPEN:
-    {
+        ESP_LOGD(TAG, "Mode OPEN: tag=%s (no verification)", tag);
-        // Sem verificação; normalmente nem é necessário evento.
-        ESP_LOGI(TAG, "Mode OPEN: tag=%s (no verification)", tag);
         break;
-    }
 
     case AUTH_MODE_LOCAL_RFID:
     {
@@ -430,9 +394,10 @@ void auth_process_tag(const char *tag)
                 strncpy(ev.tag, tag, AUTH_TAG_MAX_LEN - 1);
                 ev.tag[AUTH_TAG_MAX_LEN - 1] = '\0';
                 ev.authorized = true;
+
                 esp_event_post(AUTH_EVENTS, AUTH_EVENT_TAG_SAVED,
                                &ev, sizeof(ev), portMAX_DELAY);
-                ESP_LOGI(TAG, "Tag registered: %s", tag);
+                ESP_LOGD(TAG, "Tag registered: %s", tag);
             }
             else
             {
@@ -446,8 +411,9 @@ void auth_process_tag(const char *tag)
         ev.tag[AUTH_TAG_MAX_LEN - 1] = '\0';
         ev.authorized = is_tag_valid(tag);
 
-        ESP_LOGI(TAG, "LOCAL tag %s: %s", tag,
+        ESP_LOGD(TAG, "LOCAL tag %s: %s", tag,
                  ev.authorized ? "AUTHORIZED" : "DENIED");
+
         esp_event_post(AUTH_EVENTS, AUTH_EVENT_TAG_PROCESSED,
                        &ev, sizeof(ev), portMAX_DELAY);
         break;
@@ -455,13 +421,14 @@ void auth_process_tag(const char *tag)
 
     case AUTH_MODE_OCPP_RFID:
     {
-        // Não decide localmente. Pede validação ao OCPP.
         auth_tag_verify_event_t rq = {0};
         strncpy(rq.tag, tag, AUTH_TAG_MAX_LEN - 1);
         rq.tag[AUTH_TAG_MAX_LEN - 1] = '\0';
         rq.req_id = s_next_req_id++;
-        ESP_LOGI(TAG, "OCPP VERIFY requested for tag=%s (req_id=%u)",
+
+        ESP_LOGD(TAG, "OCPP VERIFY requested for tag=%s (req_id=%u)",
                  rq.tag, (unsigned)rq.req_id);
+
         esp_event_post(AUTH_EVENTS, AUTH_EVENT_TAG_VERIFY,
                        &rq, sizeof(rq), portMAX_DELAY);
         break;

components/auth/src/wiegand_reader.c

@@ -276,10 +276,7 @@ static void wiegand_sim_task(void *arg)
 {
     // lista fixa de idTags simuladas
     static const char *idtaglist[] = {
-        "00000041349",
+        "127239144069"};
-        "W2602312345",
-        "W34ABCDE123",
-    };
     const size_t list_size = sizeof(idtaglist) / sizeof(idtaglist[0]);
 
     for (;;)

components/buzzer/CMakeLists.txt

@@ -8,5 +8,5 @@ idf_component_register(
     INCLUDE_DIRS "include"
     PRIV_INCLUDE_DIRS "src"
     REQUIRES esp_event
-    PRIV_REQUIRES driver nvs_flash esp_timer evse
+    PRIV_REQUIRES driver esp_timer evse network
 )

components/buzzer/include/buzzer.h

@@ -3,8 +3,7 @@
 
 #include <stdint.h>
 #include <stdbool.h>
-#include "esp_err.h"
+#include "buzzer_events.h"   // buzzer_pattern_id_t
-#include "buzzer_events.h"   // para buzzer_pattern_id_t
 
 #ifdef __cplusplus
 extern "C" {
@@ -33,7 +32,7 @@ void buzzer_stop(void);
 
 /**
  * @brief Ativa/Desativa globalmente o buzzer (mute).
- *        Quando desativado, não toca e garante nível/desligado.
+ *        Quando desativado, não toca e garante desligado.
  */
 void buzzer_set_enabled(bool enabled);
 
@@ -52,9 +51,10 @@ void buzzer_set_quiet_hours(bool enabled, uint16_t start_min, uint16_t end_min);
 
 /**
  * @brief Ajusta a frequência PWM (somente PASSIVE/LEDC; timer exclusivo recomendado).
- * @return ESP_OK em sucesso; erro se modo inválido ou argumento fora do range.
+ * @param hz Frequência desejada.
+ * @return Frequência efetiva configurada (Hz). 0 em erro (modo inválido ou argumento fora do range).
  */
-esp_err_t buzzer_set_frequency(uint32_t hz);
+uint32_t buzzer_set_frequency(uint32_t hz);
 
 /**
  * @brief Define o duty cycle em porcentagem (0..100) para PASSIVE/LEDC.
@@ -63,4 +63,4 @@ void buzzer_set_duty_percent(uint8_t pct);
 
 #ifdef __cplusplus
 }
-#endif
+#endif

components/buzzer/src/buzzer.c

@@ -1,5 +1,6 @@
 // buzzer.c
-#include "buzzer_events.h"
+#include "buzzer.h"
+
 #include "evse_events.h"
 #include "auth_events.h"
 #include "network_events.h"
@@ -11,27 +12,26 @@
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "freertos/queue.h"
+#include "freertos/event_groups.h"
 
 #include "driver/gpio.h"
 #include "driver/ledc.h"
 
 #include <time.h>
 #include <string.h>
+#include <stddef.h>
 
 // ===================== Configuração padrão =====================
 #define CONFIG_BUZZER_GPIO GPIO_NUM_27
 
 // 1 = PASSIVE (PWM), 0 = ACTIVE (on/off)
-#define CONFIG_BUZZER_MODE_PASSIVE 0
+#define CONFIG_BUZZER_MODE_PASSIVE 1
 
-#define CONFIG_BUZZER_FREQ_HZ 3500
+#define CONFIG_BUZZER_FREQ_HZ 2400
-
+#define CONFIG_BUZZER_DUTY_PCT 40
-#define CONFIG_BUZZER_DUTY_PCT 70
 
 #define CONFIG_BUZZER_QUEUE_LEN 8
-
 #define CONFIG_BUZZER_TASK_STACK 2048
-
 #define CONFIG_BUZZER_TASK_PRIO (tskIDLE_PRIORITY + 1)
 
 // anti-spam (gap mínimo entre toques)
@@ -41,7 +41,6 @@
 
 // quiet hours start (minutos desde 00:00)
 #define CONFIG_BUZZER_QUIET_START_MIN (22 * 60)
-
 // quiet hours end (minutos desde 00:00)
 #define CONFIG_BUZZER_QUIET_END_MIN (7 * 60)
 
@@ -113,6 +112,31 @@ static TaskHandle_t s_buzzer_task = NULL;
 static TickType_t s_last_play_tick = 0;
 static const TickType_t s_min_gap_ticks = pdMS_TO_TICKS(CONFIG_BUZZER_MIN_GAP_MS);
 
+// STOP / preempt (robusto em dual-core)
+static EventGroupHandle_t s_buzzer_eg = NULL;
+#define BUZZER_EG_STOP_BIT (1u << 0)
+
+static bool s_inited = false;
+
+static inline bool buzzer_should_stop(void)
+{
+    if (!s_buzzer_eg)
+        return false;
+    return (xEventGroupGetBits(s_buzzer_eg) & BUZZER_EG_STOP_BIT) != 0;
+}
+
+static inline void buzzer_clear_stop(void)
+{
+    if (s_buzzer_eg)
+        xEventGroupClearBits(s_buzzer_eg, BUZZER_EG_STOP_BIT);
+}
+
+static inline void buzzer_set_stop(void)
+{
+    if (s_buzzer_eg)
+        xEventGroupSetBits(s_buzzer_eg, BUZZER_EG_STOP_BIT);
+}
+
 // ===================== Padrões (afinados) =====================
 // NOTA: os enums BUZZER_PATTERN_* vêm de buzzer_events.h
 
@@ -139,7 +163,8 @@ static const buzzer_step_t pattern_fault[] = {
     {450, 0} // bloco 2
 };
 
-static const buzzer_pattern_t buzzer_patterns[] = {
+// BUG importante corrigido: tamanho explícito = BUZZER_PATTERN_MAX
+static const buzzer_pattern_t buzzer_patterns[BUZZER_PATTERN_MAX] = {
     [BUZZER_PATTERN_PLUGGED] = {pattern_plugged, sizeof(pattern_plugged) / sizeof(buzzer_step_t)},
     [BUZZER_PATTERN_UNPLUGGED] = {pattern_unplugged, sizeof(pattern_unplugged) / sizeof(buzzer_step_t)},
     [BUZZER_PATTERN_CHARGING] = {pattern_charging, sizeof(pattern_charging) / sizeof(buzzer_step_t)},
@@ -161,38 +186,46 @@ static inline uint32_t duty_from_percent(uint8_t pct, ledc_timer_bit_t res)
     return (uint32_t)((pct * max) / 100U);
 }
 
+static inline void buzzer_set_duty_raw(uint32_t duty)
+{
+    ledc_set_duty(s_buzzer_cfg.ledc_speed_mode, s_buzzer_cfg.ledc_channel, duty);
+    ledc_update_duty(s_buzzer_cfg.ledc_speed_mode, s_buzzer_cfg.ledc_channel);
+}
+
+static inline void buzzer_set_duty_pct(uint8_t pct)
+{
+    buzzer_set_duty_raw(duty_from_percent(pct, s_buzzer_cfg.duty_resolution));
+}
+
+// Fade async (NO_WAIT) para permitir STOP responsivo (checamos por nós)
+static inline void buzzer_fade_to_pct_async(uint8_t pct, uint32_t time_ms)
+{
+    uint32_t duty = duty_from_percent(pct, s_buzzer_cfg.duty_resolution);
+    ledc_set_fade_with_time(s_buzzer_cfg.ledc_speed_mode, s_buzzer_cfg.ledc_channel, duty, time_ms);
+    ledc_fade_start(s_buzzer_cfg.ledc_speed_mode, s_buzzer_cfg.ledc_channel, LEDC_FADE_NO_WAIT);
+}
+
 static inline bool is_pattern_valid(buzzer_pattern_id_t id)
 {
     return (id > BUZZER_PATTERN_NONE && id < BUZZER_PATTERN_MAX);
 }
 
-static void buzzer_on(void)
+static inline bool is_critical_pattern(buzzer_pattern_id_t id)
 {
-    if (s_buzzer_cfg.mode == BUZZER_MODE_PASSIVE)
+    return (id == BUZZER_PATTERN_FAULT || id == BUZZER_PATTERN_CARD_DENIED);
-    {
-        // Não mudar freq a cada beep; já foi configurada na init.
-        esp_err_t err1 = ledc_set_duty(s_buzzer_cfg.ledc_speed_mode,
-                                       s_buzzer_cfg.ledc_channel,
-                                       duty_from_percent(s_buzzer_cfg.duty_percent, s_buzzer_cfg.duty_resolution));
-        if (err1 != ESP_OK)
-            ESP_LOGW(TAG, "ledc_set_duty err=%s", esp_err_to_name(err1));
-        esp_err_t err2 = ledc_update_duty(s_buzzer_cfg.ledc_speed_mode, s_buzzer_cfg.ledc_channel);
-        if (err2 != ESP_OK)
-            ESP_LOGW(TAG, "ledc_update_duty err=%s", esp_err_to_name(err2));
-    }
-    else
-    {
-        gpio_set_level(s_buzzer_cfg.gpio, 1);
-    }
 }
 
 static void buzzer_off(void)
 {
+    if (!s_inited)
+        return;
+
     if (s_buzzer_cfg.mode == BUZZER_MODE_PASSIVE)
     {
         esp_err_t err1 = ledc_set_duty(s_buzzer_cfg.ledc_speed_mode, s_buzzer_cfg.ledc_channel, 0);
         if (err1 != ESP_OK)
             ESP_LOGW(TAG, "ledc_set_duty(0) err=%s", esp_err_to_name(err1));
+
         esp_err_t err2 = ledc_update_duty(s_buzzer_cfg.ledc_speed_mode, s_buzzer_cfg.ledc_channel);
         if (err2 != ESP_OK)
             ESP_LOGW(TAG, "ledc_update_duty err=%s", esp_err_to_name(err2));
@@ -209,6 +242,11 @@ static bool in_quiet_hours(void)
         return false;
 
     time_t now = time(NULL);
+
+    // Se ainda não há tempo real (NTP não acertou), não aplicar quiet hours
+    if (now < 1700000000) // ~2023-11
+        return false;
+
     struct tm lt;
     if (localtime_r(&now, &lt) == NULL)
         return false;
@@ -219,36 +257,103 @@ static bool in_quiet_hours(void)
 
     if (start == end)
         return false; // desativado
+
     if (start < end)
-    {
         return (minutes >= start && minutes < end);
-    }
     else
-    { // janela cruza meia-noite
+        return (minutes >= start || minutes < end); // cruza meia-noite
-        return (minutes >= start || minutes < end);
-    }
 }
 
 // ===================== Execução do padrão (apenas dentro da task) =====================
 static void buzzer_execute(buzzer_pattern_id_t pattern_id)
 {
     if (!is_pattern_valid(pattern_id))
-    {
-        ESP_LOGW(TAG, "Invalid buzzer pattern id: %d", pattern_id);
         return;
-    }
 
     const buzzer_pattern_t *pattern = &buzzer_patterns[pattern_id];
+    if (!pattern->steps || pattern->length == 0)
+        return;
+
+    // Afinar aqui (para “premium”)
+    const uint32_t FADE_IN_MS = 10;
+    const uint32_t FADE_OUT_MS = 20;
+
+    // Não limpar STOP aqui — se alguém chamou buzzer_stop(), queremos respeitar já.
     for (size_t i = 0; i < pattern->length; i++)
     {
-        buzzer_on();
+        if (buzzer_should_stop())
-        vTaskDelay(pdMS_TO_TICKS(pattern->steps[i].on_ms));
+            break;
-        buzzer_off();
+
-        if (pattern->steps[i].off_ms > 0)
+        uint32_t on_ms = pattern->steps[i].on_ms;
+        uint32_t off_ms = pattern->steps[i].off_ms;
+
+        if (s_buzzer_cfg.mode == BUZZER_MODE_PASSIVE)
         {
-            vTaskDelay(pdMS_TO_TICKS(pattern->steps[i].off_ms));
+            // Sempre começar em 0 para evitar "click"
+            buzzer_set_duty_pct(0);
+
+            uint32_t fi = (on_ms > (FADE_IN_MS + FADE_OUT_MS)) ? FADE_IN_MS : (on_ms / 3);
+            uint32_t fo = (on_ms > (FADE_IN_MS + FADE_OUT_MS)) ? FADE_OUT_MS : (on_ms / 3);
+            uint32_t sustain = (on_ms > (fi + fo)) ? (on_ms - fi - fo) : 0;
+
+            // Fade in (async) + espera em passos para STOP rápido
+            if (fi > 0)
+                buzzer_fade_to_pct_async(s_buzzer_cfg.duty_percent, fi);
+            for (uint32_t t = 0; t < fi; t += 10)
+            {
+                if (buzzer_should_stop())
+                    break;
+                vTaskDelay(pdMS_TO_TICKS(10));
+            }
+
+            // Sustain
+            for (uint32_t t = 0; t < sustain; t += 10)
+            {
+                if (buzzer_should_stop())
+                    break;
+                vTaskDelay(pdMS_TO_TICKS(10));
+            }
+
+            if (buzzer_should_stop())
+                break;
+
+            // Fade out (async) + espera em passos
+            if (fo > 0)
+                buzzer_fade_to_pct_async(0, fo);
+            for (uint32_t t = 0; t < fo; t += 10)
+            {
+                if (buzzer_should_stop())
+                    break;
+                vTaskDelay(pdMS_TO_TICKS(10));
+            }
+
+            buzzer_set_duty_pct(0);
+        }
+        else
+        {
+            // ACTIVE (liga/desliga simples)
+            gpio_set_level(s_buzzer_cfg.gpio, 1);
+            for (uint32_t t = 0; t < on_ms; t += 10)
+            {
+                if (buzzer_should_stop())
+                    break;
+                vTaskDelay(pdMS_TO_TICKS(10));
+            }
+            gpio_set_level(s_buzzer_cfg.gpio, 0);
+        }
+
+        if (buzzer_should_stop())
+            break;
+
+        for (uint32_t t = 0; t < off_ms; t += 10)
+        {
+            if (buzzer_should_stop())
+                break;
+            vTaskDelay(pdMS_TO_TICKS(10));
         }
     }
+
+    buzzer_off();
 }
 
 // ===================== Task & Fila =====================
@@ -260,30 +365,31 @@ static void buzzer_task(void *arg)
     {
         if (xQueueReceive(s_buzzer_q, &id, portMAX_DELAY) == pdTRUE)
         {
-
+            ESP_LOGD(TAG, "dequeue pattern %d", id);
-            ESP_LOGD(TAG, "dequeue pattern %d", id); // na buzzer_task()
 
             if (!s_buzzer_ctl.enabled)
                 continue;
 
             // Quiet hours: permitir apenas alertas críticos/negativos
-            if (in_quiet_hours())
+            if (in_quiet_hours() && !is_critical_pattern(id))
+                continue;
+
+            // Anti-spam global (NÃO aplicar a padrões críticos)
+            if (!is_critical_pattern(id))
             {
-                if (!(id == BUZZER_PATTERN_FAULT || id == BUZZER_PATTERN_CARD_DENIED))
+                TickType_t now = xTaskGetTickCount();
-                {
+                if ((now - s_last_play_tick) < s_min_gap_ticks)
                     continue;
-                }
+                s_last_play_tick = now;
             }
 
-            // Anti-spam global
+            // Se veio STOP pendente, limpamos antes de começar um novo padrão
-            TickType_t now = xTaskGetTickCount();
+            buzzer_clear_stop();
-            if ((now - s_last_play_tick) < s_min_gap_ticks)
-            {
-                continue;
-            }
-            s_last_play_tick = now;
 
             buzzer_execute(id);
+
+            // Se alguém pediu stop durante execução, já paramos; limpamos o bit.
+            buzzer_clear_stop();
         }
     }
 }
@@ -291,17 +397,32 @@ static void buzzer_task(void *arg)
 // ===================== API pública =====================
 void buzzer_play(buzzer_pattern_id_t id)
 {
+    ESP_LOGD(TAG, "enqueue pattern %d", id);
 
-    ESP_LOGD(TAG, "enqueue pattern %d", id); // dentro de buzzer_play()
+    if (!s_inited || !is_pattern_valid(id) || s_buzzer_q == NULL)
-
-    if (!is_pattern_valid(id) || s_buzzer_q == NULL)
         return;
-    (void)xQueueSend(s_buzzer_q, &id, 0);
+
+    // Críticos: preempt + vão para a frente
+    if (is_critical_pattern(id))
+    {
+        buzzer_stop();
+        if (xQueueSendToFront(s_buzzer_q, &id, pdMS_TO_TICKS(10)) != pdTRUE)
+            ESP_LOGW(TAG, "buzzer queue full, dropped critical pattern=%d", id);
+        return;
+    }
+
+    // Não-críticos: pequeno timeout + log se drop
+    if (xQueueSend(s_buzzer_q, &id, pdMS_TO_TICKS(10)) != pdTRUE)
+        ESP_LOGW(TAG, "buzzer queue full, dropped pattern=%d", id);
 }
 
 void buzzer_stop(void)
 {
-    // Interrompe imediatamente: esvazia fila e desliga
+    if (!s_inited)
+        return;
+
+    // Interrompe imediatamente: sinaliza stop, esvazia fila e desliga
+    buzzer_set_stop();
     if (s_buzzer_q)
         xQueueReset(s_buzzer_q);
     buzzer_off();
@@ -328,15 +449,22 @@ void buzzer_set_quiet_hours(bool enabled, uint16_t start_min, uint16_t end_min)
         s_buzzer_ctl.quiet_end_min = end_min;
 }
 
-// Opcional: mudar tom dinamicamente (apenas se o timer for exclusivo do buzzer)
+// ledc_set_freq normalmente devolve a frequência efetiva (0 se falhar)
-esp_err_t buzzer_set_frequency(uint32_t hz)
+uint32_t buzzer_set_frequency(uint32_t hz)
 {
+    if (!s_inited)
+        return 0;
     if (s_buzzer_cfg.mode != BUZZER_MODE_PASSIVE)
-        return ESP_ERR_INVALID_STATE;
+        return 0;
     if (hz < 50 || hz > 20000)
-        return ESP_ERR_INVALID_ARG;
+        return 0;
+
     s_buzzer_cfg.freq_hz = hz;
-    return ledc_set_freq(s_buzzer_cfg.ledc_speed_mode, s_buzzer_cfg.ledc_timer, hz);
+
+    uint32_t eff = ledc_set_freq(s_buzzer_cfg.ledc_speed_mode, s_buzzer_cfg.ledc_timer, hz);
+    if (eff == 0)
+        ESP_LOGW(TAG, "ledc_set_freq failed (hz=%lu)", (unsigned long)hz);
+    return eff;
 }
 
 void buzzer_set_duty_percent(uint8_t pct)
@@ -382,7 +510,6 @@ static void evse_event_handler(void *arg, esp_event_base_t base, int32_t id, voi
         buzzer_evt.pattern = BUZZER_PATTERN_CHARGING;
         break;
     case EVSE_STATE_EVENT_FAULT:
-        // Preempta qualquer beep em andamento
         buzzer_stop();
         buzzer_evt.pattern = BUZZER_PATTERN_FAULT;
         break;
@@ -398,7 +525,7 @@ static void network_event_handler(void *handler_args, esp_event_base_t base, int
     if (base != NETWORK_EVENTS)
         return;
 
-    ESP_LOGI(TAG, "Network event id=%d", (int)id);
+    ESP_LOGD(TAG, "Network event id=%d", (int)id);
 
     buzzer_event_data_t evt = {0};
 
@@ -406,12 +533,9 @@ static void network_event_handler(void *handler_args, esp_event_base_t base, int
     {
     case NETWORK_EVENT_AP_STARTED:
     case NETWORK_EVENT_STA_CONNECTED:
-        // Usa padrão de AP_START para indicar rede disponível
         evt.pattern = BUZZER_PATTERN_AP_START;
         break;
-
     default:
-        // Para já, ignorar outros eventos de rede
         return;
     }
 
@@ -446,6 +570,12 @@ static void auth_event_handler(void *arg, esp_event_base_t base, int32_t id, voi
 // ===================== Inicialização / Deinit =====================
 void buzzer_init(void)
 {
+    if (s_inited)
+    {
+        ESP_LOGW(TAG, "buzzer_init called twice");
+        return;
+    }
+
     // Config HW
     if (s_buzzer_cfg.mode == BUZZER_MODE_PASSIVE)
     {
@@ -466,6 +596,11 @@ void buzzer_init(void)
             .duty = 0,
             .hpoint = 0};
         ESP_ERROR_CHECK(ledc_channel_config(&ccfg));
+
+        // Evita crash se já estiver instalado (init repetido em app maior)
+        esp_err_t fe = ledc_fade_func_install(0);
+        if (fe != ESP_OK && fe != ESP_ERR_INVALID_STATE)
+            ESP_ERROR_CHECK(fe);
     }
     else
     {
@@ -479,14 +614,14 @@ void buzzer_init(void)
         gpio_set_level(s_buzzer_cfg.gpio, 0);
     }
 
-    buzzer_set_quiet_hours(false, 0, 0);
+    // STOP event group
-    buzzer_set_enabled(true);
+    s_buzzer_eg = xEventGroupCreate();
-
+    configASSERT(s_buzzer_eg);
-    buzzer_off();
 
     // Fila + Task
     s_buzzer_q = xQueueCreate(CONFIG_BUZZER_QUEUE_LEN, sizeof(buzzer_pattern_id_t));
     configASSERT(s_buzzer_q != NULL);
+
     BaseType_t ok = xTaskCreatePinnedToCore(
         buzzer_task,
         "buzzer_task",
@@ -497,6 +632,13 @@ void buzzer_init(void)
         tskNO_AFFINITY);
     configASSERT(ok == pdPASS);
 
+    // Runtime defaults
+    buzzer_set_quiet_hours(false, 0, 0);
+    buzzer_set_enabled(true);
+
+    s_inited = true;
+    buzzer_off();
+
     // Handlers
     ESP_ERROR_CHECK(esp_event_handler_register(BUZZER_EVENTS, BUZZER_EVENT_PLAY_PATTERN, buzzer_event_handler, NULL));
     ESP_ERROR_CHECK(esp_event_handler_register(EVSE_EVENTS, EVSE_EVENT_STATE_CHANGED, evse_event_handler, NULL));
@@ -514,24 +656,39 @@ void buzzer_init(void)
 
 void buzzer_deinit(void)
 {
+    if (!s_inited)
+        return;
+
     (void)esp_event_handler_unregister(BUZZER_EVENTS, BUZZER_EVENT_PLAY_PATTERN, buzzer_event_handler);
     (void)esp_event_handler_unregister(EVSE_EVENTS, EVSE_EVENT_STATE_CHANGED, evse_event_handler);
     (void)esp_event_handler_unregister(AUTH_EVENTS, AUTH_EVENT_TAG_PROCESSED, auth_event_handler);
     (void)esp_event_handler_unregister(AUTH_EVENTS, AUTH_EVENT_TAG_SAVED, auth_event_handler);
     (void)esp_event_handler_unregister(NETWORK_EVENTS, ESP_EVENT_ANY_ID, network_event_handler);
 
+    // Para já
+    buzzer_stop();
+
+    // Mata task ANTES de apagar a queue (evita uso-after-free raro)
+    if (s_buzzer_task)
+    {
+        vTaskDelete(s_buzzer_task);
+        s_buzzer_task = NULL;
+    }
+
     if (s_buzzer_q)
     {
         vQueueDelete(s_buzzer_q);
         s_buzzer_q = NULL;
     }
 
-    if (s_buzzer_task)
+    if (s_buzzer_eg)
     {
-        vTaskDelete(s_buzzer_task);
+        vEventGroupDelete(s_buzzer_eg);
-        s_buzzer_task = NULL;
+        s_buzzer_eg = NULL;
     }
 
+    s_inited = false;
     buzzer_off();
+
     ESP_LOGI(TAG, "Buzzer deinitialized");
-}
+}

components/config/CMakeLists.txt

@@ -2,5 +2,5 @@ set(srcs
     "board_config.c")
 
 idf_component_register(SRCS "${srcs}"
-					PRIV_REQUIRES nvs_flash
+					PRIV_REQUIRES
                     INCLUDE_DIRS "include")

components/config/board_config.c

@@ -1,4 +1,5 @@
 #include <string.h>
+#include <strings.h>
 #include <ctype.h>
 #include "esp_system.h"
 #include "esp_log.h"
@@ -12,7 +13,27 @@ board_config_t board_config;
 
 bool atob(const char *value)
 {
-    return value[0] == 'y';
+    return value[0] == 'y' || value[0] == 'Y' || value[0] == '1';
+}
+
+static board_config_pilot_adc_source_t pilot_adc_source_from_string(const char *value)
+{
+    if (value == NULL)
+    {
+        return BOARD_CONFIG_PILOT_ADC_EXTERNAL_ADC121;
+    }
+
+    if (!strcasecmp(value, "internal") ||
+        !strcasecmp(value, "esp32") ||
+        !strcasecmp(value, "adc_internal") ||
+        !strcasecmp(value, "internal_esp32") ||
+        !strcasecmp(value, "1") ||
+        atob(value))
+    {
+        return BOARD_CONFIG_PILOT_ADC_INTERNAL_ESP32;
+    }
+
+    return BOARD_CONFIG_PILOT_ADC_EXTERNAL_ADC121;
 }
 
 #define SET_CONFIG_VALUE(name, prop, convert_fn) \
@@ -78,6 +99,8 @@ void board_config_load()
                     SET_CONFIG_VALUE("BUZZER_GPIO", buzzer_gpio, atoi);
                     SET_CONFIG_VALUE("BUTTON_WIFI_GPIO", button_wifi_gpio, atoi);
                     SET_CONFIG_VALUE("PILOT_PWM_GPIO", pilot_pwm_gpio, atoi);
+                    SET_CONFIG_VALUE("PILOT_ADC_SOURCE", pilot_adc_source, pilot_adc_source_from_string);
+                    SET_CONFIG_VALUE("PILOT_ADC_INTERNAL", pilot_adc_source, pilot_adc_source_from_string);
                     SET_CONFIG_VALUE("PILOT_ADC_CHANNEL", pilot_adc_channel, atoi);
                     SET_CONFIG_VALUE("PILOT_DOWN_THRESHOLD_12", pilot_down_threshold_12, atoi);
                     SET_CONFIG_VALUE("PILOT_DOWN_THRESHOLD_9", pilot_down_threshold_9, atoi);

components/config/include/board_config.h

@@ -1,6 +1,9 @@
 #ifndef BOARD_CONFIG_H_
 #define BOARD_CONFIG_H_
 
+#include <stdbool.h>
+#include <stdint.h>
+
 #include "hal/adc_types.h"
 #include "hal/gpio_types.h"
 #include "soc/soc_caps.h"
@@ -19,6 +22,12 @@ typedef enum
     BOARD_CONFIG_SERIAL_RS485
 } board_config_serial_t;
 
+typedef enum
+{
+    BOARD_CONFIG_PILOT_ADC_EXTERNAL_ADC121 = 0,
+    BOARD_CONFIG_PILOT_ADC_INTERNAL_ESP32 = 1
+} board_config_pilot_adc_source_t;
+
 typedef struct
 {
     char device_name[32];
@@ -36,6 +45,7 @@ typedef struct
     gpio_num_t button_wifi_gpio;
 
     gpio_num_t pilot_pwm_gpio;
+    board_config_pilot_adc_source_t pilot_adc_source;
     adc_channel_t pilot_adc_channel;
     uint16_t pilot_down_threshold_12;
     uint16_t pilot_down_threshold_9;

components/evse/CMakeLists.txt

@@ -17,6 +17,6 @@ set(srcs
 idf_component_register(
     SRCS ${srcs}
     INCLUDE_DIRS "include"
-    PRIV_REQUIRES nvs_flash driver
+    PRIV_REQUIRES driver esp_adc
-    REQUIRES peripherals auth loadbalancer scheduler
+    REQUIRES peripherals auth loadbalancer scheduler storage_service
 )

components/evse/evse_config.c

@@ -1,215 +1,289 @@
-#include <inttypes.h> // For PRI macros
+#include <inttypes.h>
+#include <stdbool.h>
+
+#include "freertos/FreeRTOS.h"
+
 #include "evse_config.h"
 #include "board_config.h"
 #include "evse_limits.h"
 #include "evse_api.h"
+#include "evse_state.h"
+
 #include "esp_log.h"
-#include "nvs.h"
+#include "esp_err.h"
-#include "esp_timer.h"
+#include "esp_check.h"
+
+#include "storage_service.h"
 
 static const char *TAG = "evse_config";
-
+#define NVS_NAMESPACE "evse_config"
-static nvs_handle_t nvs;
 
 // ========================
-// Configurable parameters
+// 3 variáveis (semântica simples)
 // ========================
-static uint8_t max_charging_current = MAX_CHARGING_CURRENT_LIMIT;
+
-static uint16_t charging_current;             // Persisted (NVS)
+// 1) Hardware (FIXO)
-static uint16_t charging_current_runtime = 0; // Runtime only
+static const uint8_t max_charging_current = MAX_CHARGING_CURRENT_LIMIT;
-static bool socket_outlet;
+
-static bool rcm;
+// 2) Configurável (persistido)
+static uint16_t charging_current = MAX_CHARGING_CURRENT_LIMIT;
+
+// 3) Runtime (RAM)
+static uint16_t charging_current_runtime = 0;
+
+// Outros parâmetros (persistidos)
+static bool socket_outlet = false;
+static bool rcm = false;
 static uint8_t temp_threshold = 60;
-static bool require_auth;
 
-// Availability / Enable flags
+// Availability / Enable flags (persistidos)
 static bool is_available = true;
 static bool is_enabled = true;
 
+static inline TickType_t TO_TICKS_MS(uint32_t ms) { return pdMS_TO_TICKS(ms); }
+
+// Ajusta conforme o teu boot:
+// 1000ms pode ser curto com Wi-Fi/FS/tasks; 2000ms é mais robusto em produto.
+static inline TickType_t BOOT_TO(void) { return TO_TICKS_MS(2000); }
+
 // ========================
 // Initialization
 // ========================
 esp_err_t evse_config_init(void)
 {
-    ESP_LOGD(TAG, "Initializing NVS configuration...");
+    // garante storage iniciado
-    return nvs_open("evse", NVS_READWRITE, &nvs);
+    ESP_RETURN_ON_ERROR(storage_service_init(), TAG, "storage init failed");
+    ESP_LOGI(TAG, "EVSE config init OK (storage-backed)");
+    return ESP_OK;
 }
 
 void evse_check_defaults(void)
 {
     esp_err_t err;
-    uint8_t u8;
+    uint8_t u8 = 0;
-    uint16_t u16;
+    uint16_t u16 = 0;
-    uint32_t u32;
-    bool needs_commit = false;
-    uint8_t u8_bool;
 
-    ESP_LOGD(TAG, "Checking default parameters...");
+    // Timeouts: leitura e escrita no boot
+    const TickType_t rd_to = BOOT_TO();
+    const TickType_t wr_to = TO_TICKS_MS(2000);
 
-    // Max charging current
+    ESP_LOGD(TAG, "Checking default parameters (sync persistence)...");
-    err = nvs_get_u8(nvs, "max_chrg_curr", &u8);
-    if (err != ESP_OK || u8 < MIN_CHARGING_CURRENT_LIMIT || u8 > MAX_CHARGING_CURRENT_LIMIT)
-    {
-        max_charging_current = MAX_CHARGING_CURRENT_LIMIT;
-        nvs_set_u8(nvs, "max_chrg_curr", max_charging_current);
-        needs_commit = true;
-        ESP_LOGW(TAG, "Invalid or missing max_chrg_curr, resetting to %d", max_charging_current);
-    }
-    else
-    {
-        max_charging_current = u8;
-    }
 
+    // -----------------------------------------
     // Charging current (default, persisted)
-    err = nvs_get_u16(nvs, "def_chrg_curr", &u16);
+    // -----------------------------------------
-    if (err != ESP_OK || u16 < (MIN_CHARGING_CURRENT_LIMIT) || u16 > (max_charging_current))
+    err = storage_get_u16_sync(NVS_NAMESPACE, "def_chrg_curr", &u16, rd_to);
+    if (err != ESP_OK || u16 < MIN_CHARGING_CURRENT_LIMIT || u16 > max_charging_current)
     {
         charging_current = max_charging_current;
-        nvs_set_u16(nvs, "def_chrg_curr", charging_current);
+
-        needs_commit = true;
+        esp_err_t se = storage_set_u16_sync(NVS_NAMESPACE, "def_chrg_curr", charging_current, wr_to);
-        ESP_LOGW(TAG, "Invalid or missing def_chrg_curr, resetting to %d", charging_current);
+        if (se != ESP_OK)
+        {
+            ESP_LOGE(TAG, "Failed to persist def_chrg_curr=%u: %s",
+                     (unsigned)charging_current, esp_err_to_name(se));
+            // seguimos com RAM correta; persist pode falhar por flash/partição
+        }
+
+        ESP_LOGW(TAG, "Invalid/missing def_chrg_curr (%s) -> reset to %u (sync persisted)",
+                 esp_err_to_name(err), (unsigned)charging_current);
     }
     else
     {
         charging_current = u16;
     }
 
-    // Runtime charging current inicializado a partir do default persistido
+    // runtime inicializa a partir do default
     charging_current_runtime = charging_current;
-    ESP_LOGD(TAG, "Runtime charging current initialized to: %d", charging_current_runtime);
+    ESP_LOGD(TAG, "Runtime charging current initialized from default: %u",
+             (unsigned)charging_current_runtime);
 
-    // Auth required
+    // -----------------------------------------
-    err = nvs_get_u8(nvs, "require_auth", &u8);
+    // Socket outlet (persisted) + capability gate
-    require_auth = (err == ESP_OK && u8 <= 1) ? u8 : false;
+    // -----------------------------------------
-    if (err != ESP_OK)
+    err = storage_get_u8_sync(NVS_NAMESPACE, "socket_outlet", &u8, rd_to);
+    if (err == ESP_OK && u8 <= 1)
     {
-        nvs_set_u8(nvs, "require_auth", require_auth);
+        bool wanted = (u8 != 0);
-        needs_commit = true;
-    }
 
-    // Socket outlet
+        if (wanted && !board_config.proximity)
-    err = nvs_get_u8(nvs, "socket_outlet", &u8);
-    socket_outlet = (err == ESP_OK && u8) && board_config.proximity;
-    if (err != ESP_OK)
-    {
-        nvs_set_u8(nvs, "socket_outlet", socket_outlet);
-        needs_commit = true;
-    }
-
-    // RCM
-    err = nvs_get_u8(nvs, "rcm", &u8);
-    rcm = (err == ESP_OK && u8) && board_config.rcm;
-    if (err != ESP_OK)
-    {
-        nvs_set_u8(nvs, "rcm", rcm);
-        needs_commit = true;
-    }
-
-    // Temp threshold
-    err = nvs_get_u8(nvs, "temp_threshold", &u8);
-    temp_threshold = (err == ESP_OK && u8 >= 40 && u8 <= 80) ? u8 : 60;
-    if (err != ESP_OK)
-    {
-        nvs_set_u8(nvs, "temp_threshold", temp_threshold);
-        needs_commit = true;
-    }
-
-    // Optional limits
-    if (nvs_get_u32(nvs, "def_cons_lim", &u32) == ESP_OK)
-        evse_set_consumption_limit(u32);
-
-    if (nvs_get_u32(nvs, "def_ch_time_lim", &u32) == ESP_OK)
-        evse_set_charging_time_limit(u32);
-
-    if (nvs_get_u16(nvs, "def_un_pwr_lim", &u16) == ESP_OK)
-        evse_set_under_power_limit(u16);
-
-    // Availability (persist)
-    if (nvs_get_u8(nvs, "available", &u8_bool) == ESP_OK && u8_bool <= 1)
-    {
-        is_available = (u8_bool != 0);
-    }
-    else
-    {
-        is_available = true; // default
-        nvs_set_u8(nvs, "available", (uint8_t)is_available);
-        needs_commit = true;
-        ESP_LOGW(TAG, "Missing 'available' -> default=true (persisted).");
-    }
-
-    // Enabled (persist)
-    if (nvs_get_u8(nvs, "enabled", &u8_bool) == ESP_OK && u8_bool <= 1)
-    {
-        is_enabled = (u8_bool != 0);
-    }
-    else
-    {
-        is_enabled = true; // default
-        nvs_set_u8(nvs, "enabled", (uint8_t)is_enabled);
-        needs_commit = true;
-        ESP_LOGW(TAG, "Missing 'enabled' -> default=true (persisted).");
-    }
-
-    if (needs_commit)
-    {
-        err = nvs_commit(nvs);
-        if (err == ESP_OK)
         {
-            ESP_LOGD(TAG, "Configuration committed to NVS.");
+            // NVS dizia 1, mas HW não suporta -> runtime false e persistir 0
+            socket_outlet = false;
+
+            esp_err_t se = storage_set_u8_sync(NVS_NAMESPACE, "socket_outlet", 0, wr_to);
+            if (se != ESP_OK)
+            {
+                ESP_LOGE(TAG, "Failed to persist socket_outlet=0 (capability mismatch): %s",
+                         esp_err_to_name(se));
+            }
+
+            ESP_LOGW(TAG, "socket_outlet requested but HW has no proximity -> forcing false (sync persisted)");
         }
         else
         {
-            ESP_LOGE(TAG, "Failed to commit configuration to NVS: %s", esp_err_to_name(err));
+            socket_outlet = wanted;
         }
     }
+    else
+    {
+        socket_outlet = false;
+
+        esp_err_t se = storage_set_u8_sync(NVS_NAMESPACE, "socket_outlet", 0, wr_to);
+        if (se != ESP_OK)
+        {
+            ESP_LOGE(TAG, "Failed to persist socket_outlet default=0: %s", esp_err_to_name(se));
+        }
+
+        ESP_LOGW(TAG, "Missing/invalid socket_outlet (%s) -> default=false (sync persisted).",
+                 esp_err_to_name(err));
+    }
+
+    // -----------------------------------------
+    // RCM (persisted) + capability gate
+    // -----------------------------------------
+    err = storage_get_u8_sync(NVS_NAMESPACE, "rcm", &u8, rd_to);
+    if (err == ESP_OK && u8 <= 1)
+    {
+        bool wanted = (u8 != 0);
+
+        if (wanted && !board_config.rcm)
+        {
+            rcm = false;
+
+            esp_err_t se = storage_set_u8_sync(NVS_NAMESPACE, "rcm", 0, wr_to);
+            if (se != ESP_OK)
+            {
+                ESP_LOGE(TAG, "Failed to persist rcm=0 (capability mismatch): %s",
+                         esp_err_to_name(se));
+            }
+
+            ESP_LOGW(TAG, "rcm requested but HW has no RCM -> forcing false (sync persisted)");
+        }
+        else
+        {
+            rcm = wanted;
+        }
+    }
+    else
+    {
+        rcm = false;
+
+        esp_err_t se = storage_set_u8_sync(NVS_NAMESPACE, "rcm", 0, wr_to);
+        if (se != ESP_OK)
+        {
+            ESP_LOGE(TAG, "Failed to persist rcm default=0: %s", esp_err_to_name(se));
+        }
+
+        ESP_LOGW(TAG, "Missing/invalid rcm (%s) -> default=false (sync persisted).",
+                 esp_err_to_name(err));
+    }
+
+    // -----------------------------------------
+    // Temp threshold (persisted)
+    // -----------------------------------------
+    err = storage_get_u8_sync(NVS_NAMESPACE, "temp_threshold", &u8, rd_to);
+    if (err == ESP_OK && u8 >= 40 && u8 <= 80)
+    {
+        temp_threshold = u8;
+    }
+    else
+    {
+        temp_threshold = 60;
+
+        esp_err_t se = storage_set_u8_sync(NVS_NAMESPACE, "temp_threshold", temp_threshold, wr_to);
+        if (se != ESP_OK)
+        {
+            ESP_LOGE(TAG, "Failed to persist temp_threshold=%u: %s",
+                     (unsigned)temp_threshold, esp_err_to_name(se));
+        }
+
+        ESP_LOGW(TAG, "Invalid/missing temp_threshold (%s) -> default=60 (sync persisted).",
+                 esp_err_to_name(err));
+    }
+
+    // -----------------------------------------
+    // Availability (persisted) [0/1]
+    // -----------------------------------------
+    err = storage_get_u8_sync(NVS_NAMESPACE, "available", &u8, rd_to);
+    if (err == ESP_OK && u8 <= 1)
+    {
+        is_available = (u8 != 0);
+    }
+    else
+    {
+        is_available = true;
+
+        esp_err_t se = storage_set_u8_sync(NVS_NAMESPACE, "available", 1, wr_to);
+        if (se != ESP_OK)
+        {
+            ESP_LOGE(TAG, "Failed to persist available=1: %s", esp_err_to_name(se));
+        }
+
+        ESP_LOGW(TAG, "Missing/invalid 'available' (%s) -> default=true (sync persisted).",
+                 esp_err_to_name(err));
+    }
+
+    // -----------------------------------------
+    // Enabled (persisted) [0/1]
+    // -----------------------------------------
+    err = storage_get_u8_sync(NVS_NAMESPACE, "enabled", &u8, rd_to);
+    if (err == ESP_OK && u8 <= 1)
+    {
+        is_enabled = (u8 != 0);
+    }
+    else
+    {
+        is_enabled = true;
+
+        esp_err_t se = storage_set_u8_sync(NVS_NAMESPACE, "enabled", 1, wr_to);
+        if (se != ESP_OK)
+        {
+            ESP_LOGE(TAG, "Failed to persist enabled=1: %s", esp_err_to_name(se));
+        }
+
+        ESP_LOGW(TAG, "Missing/invalid 'enabled' (%s) -> default=true (sync persisted).",
+                 esp_err_to_name(err));
+    }
+
+    // Flush explícito no boot:
+    // - ajuda a garantir commit determinístico antes do resto do sistema avançar
+    // - mantém-se útil mesmo com setters sync se o teu storage ainda estiver com debounce interno
+    esp_err_t fe = storage_flush_sync(wr_to);
+    if (fe != ESP_OK)
+        ESP_LOGE(TAG, "storage_flush_sync failed: %s", esp_err_to_name(fe));
 }
 
 // ========================
 // Charging current getters/setters
 // ========================
-uint8_t evse_get_max_charging_current(void)
+uint8_t evse_get_max_charging_current(void) { return max_charging_current; }
-{
-    return max_charging_current;
-}
 
-esp_err_t evse_set_max_charging_current(uint8_t value)
+uint16_t evse_get_charging_current(void) { return charging_current; }
-{
-    if (value < MIN_CHARGING_CURRENT_LIMIT || value > MAX_CHARGING_CURRENT_LIMIT)
-        return ESP_ERR_INVALID_ARG;
-    max_charging_current = value;
-    evse_set_runtime_charging_current(value);
-    nvs_set_u8(nvs, "max_chrg_curr", value);
-    return nvs_commit(nvs);
-}
-
-uint16_t evse_get_charging_current(void)
-{
-    return charging_current;
-}
 
 esp_err_t evse_set_charging_current(uint16_t value)
 {
-    if (value < (MIN_CHARGING_CURRENT_LIMIT) || value > (max_charging_current))
+    if (value < MIN_CHARGING_CURRENT_LIMIT || value > max_charging_current)
         return ESP_ERR_INVALID_ARG;
+
+    if (value == charging_current)
+    {
+        evse_set_runtime_charging_current(value);
+        return ESP_OK;
+    }
+
     charging_current = value;
-    nvs_set_u16(nvs, "def_chrg_curr", value);
-    return nvs_commit(nvs);
-}
 
-uint16_t evse_get_default_charging_current(void)
+    esp_err_t err = storage_set_u16_async(NVS_NAMESPACE, "def_chrg_curr", value);
-{
+    if (err != ESP_OK)
-    uint16_t value;
+    {
-    if (nvs_get_u16(nvs, "def_chrg_curr", &value) == ESP_OK)
+        // Em runtime, isto pode falhar por fila cheia. RAM fica correta; persistência é best-effort.
-        return value;
+        ESP_LOGE(TAG, "Failed to persist def_chrg_curr async=%u: %s", (unsigned)value, esp_err_to_name(err));
-    return charging_current;
+        return err;
-}
+    }
 
-esp_err_t evse_set_default_charging_current(uint16_t value)
+    evse_set_runtime_charging_current(value);
-{
+    return ESP_OK;
-    if (value < (MIN_CHARGING_CURRENT_LIMIT) || value > (max_charging_current))
-        return ESP_ERR_INVALID_ARG;
-    nvs_set_u16(nvs, "def_chrg_curr", value);
-    return nvs_commit(nvs);
 }
 
 // ========================
@@ -218,135 +292,119 @@ esp_err_t evse_set_default_charging_current(uint16_t value)
 void evse_set_runtime_charging_current(uint16_t value)
 {
     if (value > max_charging_current)
-    {
         value = max_charging_current;
-    }
     else if (value < MIN_CHARGING_CURRENT_LIMIT)
-    {
         value = MIN_CHARGING_CURRENT_LIMIT;
-    }
 
     charging_current_runtime = value;
-
-    ESP_LOGI(TAG, "Runtime charging current updated: %d", charging_current_runtime);
-
-    evse_config_event_data_t evt = {
-        .charging = evse_state_is_charging(evse_get_state()),
-        .hw_max_current = (float)evse_get_max_charging_current(),
-        .runtime_current = (float)evse_get_runtime_charging_current(),
-        .timestamp_us = esp_timer_get_time()};
-
-    esp_event_post(EVSE_EVENTS,
-                   EVSE_EVENT_CONFIG_UPDATED,
-                   &evt,
-                   sizeof(evt),
-                   portMAX_DELAY);
 }
 
-uint16_t evse_get_runtime_charging_current(void)
+uint16_t evse_get_runtime_charging_current(void) { return charging_current_runtime; }
-{
-    return charging_current_runtime;
-}
 
 // ========================
 // Socket outlet
 // ========================
-bool evse_get_socket_outlet(void)
+bool evse_get_socket_outlet(void) { return socket_outlet; }
-{
-    return socket_outlet;
-}
 
 esp_err_t evse_set_socket_outlet(bool value)
 {
     if (value && !board_config.proximity)
         return ESP_ERR_INVALID_ARG;
+    if (value == socket_outlet)
+        return ESP_OK;
+
     socket_outlet = value;
-    nvs_set_u8(nvs, "socket_outlet", value);
+
-    return nvs_commit(nvs);
+    esp_err_t err = storage_set_u8_async(NVS_NAMESPACE, "socket_outlet", (uint8_t)value);
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "Failed to persist socket_outlet async=%u: %s", (unsigned)value, esp_err_to_name(err));
+        return err;
+    }
+
+    return ESP_OK;
 }
 
 // ========================
 // RCM
 // ========================
-bool evse_is_rcm(void)
+bool evse_is_rcm(void) { return rcm; }
-{
-    return rcm;
-}
 
 esp_err_t evse_set_rcm(bool value)
 {
     if (value && !board_config.rcm)
         return ESP_ERR_INVALID_ARG;
+    if (value == rcm)
+        return ESP_OK;
+
     rcm = value;
-    nvs_set_u8(nvs, "rcm", value);
+
-    return nvs_commit(nvs);
+    esp_err_t err = storage_set_u8_async(NVS_NAMESPACE, "rcm", (uint8_t)value);
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "Failed to persist rcm async=%u: %s", (unsigned)value, esp_err_to_name(err));
+        return err;
+    }
+
+    return ESP_OK;
 }
 
 // ========================
 // Temperature
 // ========================
-uint8_t evse_get_temp_threshold(void)
+uint8_t evse_get_temp_threshold(void) { return temp_threshold; }
-{
-    return temp_threshold;
-}
 
 esp_err_t evse_set_temp_threshold(uint8_t value)
 {
     if (value < 40 || value > 80)
         return ESP_ERR_INVALID_ARG;
+    if (value == temp_threshold)
+        return ESP_OK;
+
     temp_threshold = value;
-    nvs_set_u8(nvs, "temp_threshold", value);
+
-    return nvs_commit(nvs);
+    esp_err_t err = storage_set_u8_async(NVS_NAMESPACE, "temp_threshold", value);
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "Failed to persist temp_threshold async=%u: %s", (unsigned)value, esp_err_to_name(err));
+        return err;
+    }
+
+    return ESP_OK;
 }
 
 // ========================
 // Availability
 // ========================
-bool evse_config_is_available(void)
+bool evse_config_is_available(void) { return is_available; }
-{
-    return is_available;
-}
 
 void evse_config_set_available(bool available)
 {
-    is_available = available ? true : false;
+    bool newv = available;
+    if (newv == is_available)
+        return;
 
-    esp_err_t err = nvs_set_u8(nvs, "available", (uint8_t)is_available);
+    is_available = newv;
-    if (err == ESP_OK)
+
-        err = nvs_commit(nvs);
+    esp_err_t err = storage_set_u8_async(NVS_NAMESPACE, "available", (uint8_t)is_available);
     if (err != ESP_OK)
-    {
+        ESP_LOGE(TAG, "Failed to persist 'available' async=%u: %s", (unsigned)is_available, esp_err_to_name(err));
-        ESP_LOGE(TAG, "Failed to persist 'available': %s", esp_err_to_name(err));
-    }
-
-    evse_available_event_data_t e = {
-        .available = is_available,
-        .timestamp_us = esp_timer_get_time()};
-    esp_event_post(EVSE_EVENTS, EVSE_EVENT_AVAILABLE_UPDATED, &e, sizeof(e), portMAX_DELAY);
 }
 
 // ========================
 // Enable/Disable
 // ========================
-bool evse_config_is_enabled(void)
+bool evse_config_is_enabled(void) { return is_enabled; }
-{
-    return is_enabled;
-}
 
 void evse_config_set_enabled(bool enabled)
 {
-    is_enabled = enabled ? true : false;
+    bool newv = enabled;
+    if (newv == is_enabled)
+        return;
 
-    esp_err_t err = nvs_set_u8(nvs, "enabled", (uint8_t)is_enabled);
+    is_enabled = newv;
-    if (err == ESP_OK)
+
-        err = nvs_commit(nvs);
+    esp_err_t err = storage_set_u8_async(NVS_NAMESPACE, "enabled", (uint8_t)is_enabled);
     if (err != ESP_OK)
-    {
+        ESP_LOGE(TAG, "Failed to persist 'enabled' async=%u: %s", (unsigned)is_enabled, esp_err_to_name(err));
-        ESP_LOGE(TAG, "Failed to persist 'enabled': %s", esp_err_to_name(err));
-    }
-
-    evse_enable_event_data_t e = {
-        .enabled = is_enabled,
-        .timestamp_us = esp_timer_get_time()};
-    esp_event_post(EVSE_EVENTS, EVSE_EVENT_ENABLE_UPDATED, &e, sizeof(e), portMAX_DELAY);
 }

components/evse/evse_core.c

@@ -1,3 +1,4 @@
+// components/evse/evse_core.c
 #include "evse_fsm.h"
 #include "evse_error.h"
 #include "evse_limits.h"
@@ -14,6 +15,36 @@ static const char *TAG = "evse_core";
 static SemaphoreHandle_t mutex;
 static evse_state_t last_state = EVSE_STATE_A;
 
+// Filtro simples de histerese no pilot
+#define PILOT_STABLE_SAMPLES 2
+
+static pilot_voltage_t s_last_raw = PILOT_VOLTAGE_12;
+static pilot_voltage_t s_filtered = PILOT_VOLTAGE_12;
+static int s_stable_count = 0;
+
+static pilot_voltage_t filter_pilot_voltage(pilot_voltage_t raw)
+{
+    if (raw == s_last_raw)
+    {
+        if (s_stable_count < PILOT_STABLE_SAMPLES)
+        {
+            s_stable_count++;
+        }
+    }
+    else
+    {
+        s_last_raw = raw;
+        s_stable_count = 1;
+    }
+
+    if (s_stable_count >= PILOT_STABLE_SAMPLES && raw != s_filtered)
+    {
+        s_filtered = raw;
+    }
+
+    return s_filtered;
+}
+
 static void evse_process(void);
 static void evse_core_task(void *arg);
 
@@ -32,7 +63,8 @@ void evse_init(void)
     evse_fsm_reset();
     pilot_set_level(true);
 
-    xTaskCreate(evse_core_task, "evse_core_task", 4096, NULL, 5, NULL);
+    BaseType_t rc = xTaskCreate(evse_core_task, "evse_core_task", 4096, NULL, 6, NULL);
+    configASSERT(rc == pdPASS);
 }
 
 static void evse_process(void)
@@ -44,19 +76,27 @@ static void evse_process(void)
 
     xSemaphoreTake(mutex, portMAX_DELAY);
 
-    pilot_voltage_t pilot_voltage;
+    pilot_voltage_t pilot_raw;
     bool is_n12v = false;
 
-    pilot_measure(&pilot_voltage, &is_n12v);
+    pilot_measure(&pilot_raw, &is_n12v);
-    ESP_LOGD(TAG, "Pilot: %d, -12V: %s", pilot_voltage, is_n12v ? "yes" : "no");
+    pilot_voltage_t pilot_voltage = filter_pilot_voltage(pilot_raw);
 
+    ESP_LOGD(TAG, "Pilot(raw=%d, filt=%d), -12V: %s",
+             pilot_raw, pilot_voltage, is_n12v ? "yes" : "no");
+
+    // raw set/clear; erro visível mantém holdoff interno (60s após sumir)
     evse_error_check(pilot_voltage, is_n12v);
 
+    // ✅ Sem cooldown externo: disponibilidade depende só do erro "visível"
+    bool available = evse_config_is_available() && (evse_get_error() == 0);
+    bool enabled = evse_config_is_enabled();
+
     evse_fsm_process(
         pilot_voltage,
         evse_state_get_authorized(),
-        evse_config_is_available(),
+        available,
-        evse_config_is_enabled());
+        enabled);
 
     evse_limits_check();
 
@@ -65,6 +105,7 @@ static void evse_process(void)
         if (evse_state_get_authorized())
         {
             ESP_LOGW(TAG, "Charging limit reached → revoking authorization");
+            evse_session_clear_authorized_tag();
             evse_state_set_authorized(false);
         }
     }

components/evse/evse_error.c

@@ -1,5 +1,4 @@
 #include "evse_error.h"
-#include "evse_config.h"
 
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
@@ -7,151 +6,147 @@
 #include "esp_log.h"
 #include "ntc_sensor.h"
 
+#include "esp_event.h"
+#include "esp_timer.h"
+#include "evse_events.h"
+#include "evse_config.h"
+
 static const char *TAG = "evse_error";
 
-// Estado global de erros
+// ----------------------------------------------------
-static uint32_t error_bits = 0;
+// Estado interno
-static TickType_t auto_clear_timeout = 0;
+// ----------------------------------------------------
+// raw_bits     = erros “instantâneos” conforme checks (set/clear)
+// visible_bits = erros expostos ao resto do sistema (com holdoff)
+// clear_deadline = quando pode finalmente limpar visible_bits para 0
+static uint32_t   raw_bits = 0;
+static uint32_t   visible_bits = 0;
+static TickType_t clear_deadline = 0;
 
-// Sticky flag: "todos erros foram limpos"
+// Sticky flag: "todos erros visíveis foram limpos"
 static bool error_cleared = false;
 
 // Proteção contra concorrência
 static portMUX_TYPE error_mux = portMUX_INITIALIZER_UNLOCKED;
 
-void evse_error_init(void)
+// ----------------------------------------------------
+// Helper: publicar evento de alteração de erro (visible_bits)
+// ----------------------------------------------------
+static void evse_error_post_event(uint32_t new_bits, uint32_t changed_mask)
 {
+    evse_error_event_data_t ev = {
+        .error_bits    = new_bits,
+        .changed_mask  = changed_mask,
+        .timestamp_us  = esp_timer_get_time(),
+    };
+
+    esp_err_t err = esp_event_post(
+        EVSE_EVENTS,
+        EVSE_EVENT_ERROR_CHANGED,
+        &ev,
+        sizeof(ev),
+        portMAX_DELAY);
+
+    if (err != ESP_OK)
+    {
+        ESP_LOGW(TAG, "Falha ao publicar EVSE_EVENT_ERROR_CHANGED: %s",
+                 esp_err_to_name(err));
+    }
+}
+
+// ----------------------------------------------------
+// Helpers internos
+// ----------------------------------------------------
+static bool raw_has_bit(uint32_t bit)
+{
+    bool v;
     portENTER_CRITICAL(&error_mux);
-    error_bits = 0;
+    v = ((raw_bits & bit) != 0);
-    auto_clear_timeout = 0;
-    error_cleared = false;
     portEXIT_CRITICAL(&error_mux);
+    return v;
 }
 
-void evse_error_check(pilot_voltage_t pilot_voltage, bool is_n12v)
+static void reconcile_visible_locked(TickType_t now)
 {
-    ESP_LOGD(TAG, "Verificando erro: pilot_voltage=%d, is_n12v=%s",
+    // Se existem erros reais, o visível segue imediatamente
-             pilot_voltage, is_n12v ? "true" : "false");
+    if (raw_bits != 0)
-
-    // 1) Falha elétrica geral no pilot
-    if (pilot_voltage == PILOT_VOLTAGE_1)
     {
-        bool first_time = false;
+        visible_bits = raw_bits;
-
+        clear_deadline = 0;
-        portENTER_CRITICAL(&error_mux);
+        error_cleared = false;
-        if (!(error_bits & EVSE_ERR_PILOT_FAULT_BIT))
-        {
-            error_cleared = false;
-            error_bits |= EVSE_ERR_PILOT_FAULT_BIT;
-            first_time = true;
-        }
-        portEXIT_CRITICAL(&error_mux);
-
-        if (first_time)
-        {
-            ESP_LOGW(TAG, "Erro: pilot abaixo de 2V (falha)");
-        }
-    }
-    else
-    {
-        // Pilot voltou a nível válido → limpa erro de pilot fault
-        evse_error_clear(EVSE_ERR_PILOT_FAULT_BIT);
-    }
-
-    // 2) Falta de -12V durante PWM (C ou D)
-    if ((pilot_voltage == PILOT_VOLTAGE_6 || pilot_voltage == PILOT_VOLTAGE_3) && !is_n12v)
-    {
-        bool first_time = false;
-
-        portENTER_CRITICAL(&error_mux);
-        if (!(error_bits & EVSE_ERR_DIODE_SHORT_BIT))
-        {
-            error_cleared = false;
-            error_bits |= EVSE_ERR_DIODE_SHORT_BIT;
-            auto_clear_timeout = xTaskGetTickCount() + pdMS_TO_TICKS(60000);
-            first_time = true;
-        }
-        portEXIT_CRITICAL(&error_mux);
-
-        if (first_time)
-        {
-            ESP_LOGW(TAG, "Erro: ausência de -12V no PWM (sem diodo)");
-        }
-    }
-    else
-    {
-        // Se já não estamos em C/D sem -12V, limpa o erro de diodo curto
-        evse_error_clear(EVSE_ERR_DIODE_SHORT_BIT);
-    }
-}
-
-void evse_temperature_check(void)
-{
-    float temp_c = ntc_temp_sensor();
-    uint8_t threshold = evse_get_temp_threshold();
-
-    ESP_LOGD(TAG, "Verificando temperatura: atual=%.2f °C, limite=%d °C",
-             temp_c, threshold);
-
-    // Temperatura inválida -> erro de sensor
-    if (temp_c < -40.0f || temp_c > 150.0f)
-    {
-        bool first_time = false;
-
-        portENTER_CRITICAL(&error_mux);
-        if (!(error_bits & EVSE_ERR_TEMPERATURE_FAULT_BIT))
-        {
-            error_cleared = false;
-            error_bits |= EVSE_ERR_TEMPERATURE_FAULT_BIT;
-            first_time = true;
-        }
-        portEXIT_CRITICAL(&error_mux);
-
-        if (first_time)
-        {
-            ESP_LOGW(TAG, "Sensor NTC falhou ou está desconectado");
-        }
         return;
     }
 
-    // Leitura válida -> limpa erro de sensor
+    // raw_bits == 0
-    evse_error_clear(EVSE_ERR_TEMPERATURE_FAULT_BIT);
+    if (visible_bits == 0)
-
-    // Temperatura máxima
-    if (temp_c >= threshold)
     {
-        bool first_time = false;
+        clear_deadline = 0;
-
+        return;
-        portENTER_CRITICAL(&error_mux);
-        if (!(error_bits & EVSE_ERR_TEMPERATURE_HIGH_BIT))
-        {
-            error_cleared = false;
-            error_bits |= EVSE_ERR_TEMPERATURE_HIGH_BIT;
-            auto_clear_timeout = xTaskGetTickCount() + pdMS_TO_TICKS(60000);
-            first_time = true;
-        }
-        portEXIT_CRITICAL(&error_mux);
-
-        if (first_time)
-        {
-            ESP_LOGW(TAG, "Temperatura acima do limite: %.2f °C ≥ %d °C",
-                     temp_c, threshold);
-        }
     }
-    else
+
+    // Ainda há erro visível (holdoff). Arma deadline 1x.
+    if (clear_deadline == 0)
     {
-        evse_error_clear(EVSE_ERR_TEMPERATURE_HIGH_BIT);
+        clear_deadline = now + pdMS_TO_TICKS(EVSE_ERROR_COOLDOWN_MS);
+        return;
+    }
+
+    // Expirou -> limpar finalmente
+    if ((int32_t)(now - clear_deadline) >= 0)
+    {
+        visible_bits = 0;
+        clear_deadline = 0;
+        error_cleared = true;
+    }
+}
+
+// ----------------------------------------------------
+// API pública
+// ----------------------------------------------------
+void evse_error_init(void)
+{
+    uint32_t old_vis, new_vis, changed;
+    bool post = false;
+
+    portENTER_CRITICAL(&error_mux);
+
+    old_vis = visible_bits;
+
+    raw_bits = 0;
+    visible_bits = 0;
+    clear_deadline = 0;
+    error_cleared = false;
+
+    new_vis = visible_bits;
+    changed = old_vis ^ new_vis;
+    post = (changed != 0);
+
+    portEXIT_CRITICAL(&error_mux);
+
+    if (post)
+    {
+        evse_error_post_event(new_vis, changed);
     }
 }
 
 uint32_t evse_get_error(void)
 {
     portENTER_CRITICAL(&error_mux);
-    uint32_t val = error_bits;
+    uint32_t val = visible_bits;
     portEXIT_CRITICAL(&error_mux);
     return val;
 }
 
+bool evse_error_is_active(void)
+{
+    return evse_get_error() != 0;
+}
+
+uint32_t evse_error_get_bits(void)
+{
+    return evse_get_error();
+}
+
 bool evse_error_cleared_flag(void)
 {
     portENTER_CRITICAL(&error_mux);
@@ -169,61 +164,147 @@ void evse_error_reset_flag(void)
 
 void evse_error_set(uint32_t bitmask)
 {
+    uint32_t old_vis, new_vis, changed;
+    TickType_t now = xTaskGetTickCount();
+
     portENTER_CRITICAL(&error_mux);
 
-    error_cleared = false;
+    old_vis = visible_bits;
-    error_bits |= bitmask;
 
-    if (bitmask & EVSE_ERR_AUTO_CLEAR_BITS)
+    raw_bits |= bitmask;
-    {
+    // se aparece qualquer erro, o "cleared" deixa de ser verdade
-        auto_clear_timeout = xTaskGetTickCount() + pdMS_TO_TICKS(60000); // 60s
+    error_cleared = false;
-    }
+
+    reconcile_visible_locked(now);
+
+    new_vis = visible_bits;
+    changed = old_vis ^ new_vis;
 
     portEXIT_CRITICAL(&error_mux);
+
+    if (changed != 0)
+    {
+        evse_error_post_event(new_vis, changed);
+    }
 }
 
 void evse_error_clear(uint32_t bitmask)
 {
+    uint32_t old_vis, new_vis, changed;
+    TickType_t now = xTaskGetTickCount();
+
     portENTER_CRITICAL(&error_mux);
 
-    bool had_error = (error_bits != 0);
+    old_vis = visible_bits;
-    error_bits &= ~bitmask;
 
-    if (had_error && error_bits == 0)
+    raw_bits &= ~bitmask;
-    {
+
-        error_cleared = true;
+    // ✅ Aqui é onde o “60s depois do erro desaparecer” é armado:
-    }
+    // quando raw_bits chega a 0, reconcile arma clear_deadline (uma vez)
+    reconcile_visible_locked(now);
+
+    new_vis = visible_bits;
+    changed = old_vis ^ new_vis;
 
     portEXIT_CRITICAL(&error_mux);
+
+    if (changed != 0)
+    {
+        evse_error_post_event(new_vis, changed);
+    }
 }
 
 void evse_error_tick(void)
 {
+    uint32_t old_vis, new_vis, changed;
+    TickType_t now = xTaskGetTickCount();
+
     portENTER_CRITICAL(&error_mux);
 
-    if ((error_bits & EVSE_ERR_AUTO_CLEAR_BITS) &&
+    old_vis = visible_bits;
-        auto_clear_timeout != 0 &&
+    reconcile_visible_locked(now);
-        xTaskGetTickCount() >= auto_clear_timeout)
+    new_vis = visible_bits;
-    {
+    changed = old_vis ^ new_vis;
-        error_bits &= ~EVSE_ERR_AUTO_CLEAR_BITS;
-
-        if (error_bits == 0)
-        {
-            error_cleared = true;
-        }
-
-        auto_clear_timeout = 0;
-    }
 
     portEXIT_CRITICAL(&error_mux);
+
+    if (changed != 0)
+    {
+        evse_error_post_event(new_vis, changed);
+    }
 }
 
-bool evse_error_is_active(void)
+// ----------------------------------------------------
+// Checks (raw -> set/clear)
+// ----------------------------------------------------
+void evse_error_check(pilot_voltage_t pilot_voltage, bool is_n12v)
 {
-    return evse_get_error() != 0;
+    ESP_LOGD(TAG, "Verificando erro: pilot_voltage=%d, is_n12v=%s",
+             pilot_voltage, is_n12v ? "true" : "false");
+
+    // 1) Falha elétrica geral no pilot
+    if (pilot_voltage == PILOT_VOLTAGE_1)
+    {
+        if (!raw_has_bit(EVSE_ERR_PILOT_FAULT_BIT))
+        {
+            ESP_LOGW(TAG, "Erro: pilot abaixo de 2V (falha)");
+        }
+        evse_error_set(EVSE_ERR_PILOT_FAULT_BIT);
+    }
+    else
+    {
+        evse_error_clear(EVSE_ERR_PILOT_FAULT_BIT);
+    }
+
+    // 2) Falta de -12V durante PWM (C ou D)
+    if ((pilot_voltage == PILOT_VOLTAGE_6 || pilot_voltage == PILOT_VOLTAGE_3) && !is_n12v)
+    {
+        if (!raw_has_bit(EVSE_ERR_DIODE_SHORT_BIT))
+        {
+            ESP_LOGW(TAG, "Erro: ausência de -12V no PWM (sem diodo)");
+        }
+        evse_error_set(EVSE_ERR_DIODE_SHORT_BIT);
+    }
+    else
+    {
+        evse_error_clear(EVSE_ERR_DIODE_SHORT_BIT);
+    }
 }
 
-uint32_t evse_error_get_bits(void)
+void evse_temperature_check(void)
 {
-    return evse_get_error();
+    float temp_c = ntc_temp_sensor();
+    uint8_t threshold = evse_get_temp_threshold();
+
+    ESP_LOGD(TAG, "Verificando temperatura: atual=%.2f °C, limite=%d °C",
+             temp_c, threshold);
+
+    // Temperatura inválida -> erro de sensor
+    if (temp_c < -40.0f || temp_c > 150.0f)
+    {
+        if (!raw_has_bit(EVSE_ERR_TEMPERATURE_FAULT_BIT))
+        {
+            ESP_LOGW(TAG, "Sensor NTC falhou ou está desconectado");
+        }
+        evse_error_set(EVSE_ERR_TEMPERATURE_FAULT_BIT);
+        return;
+    }
+
+    // Leitura válida -> limpa erro de sensor
+    evse_error_clear(EVSE_ERR_TEMPERATURE_FAULT_BIT);
+
+    // Temperatura máxima
+    if (temp_c >= threshold)
+    {
+        if (!raw_has_bit(EVSE_ERR_TEMPERATURE_HIGH_BIT))
+        {
+            ESP_LOGW(TAG, "Temperatura acima do limite: %.2f °C ≥ %d °C",
+                     temp_c, threshold);
+        }
+        evse_error_set(EVSE_ERR_TEMPERATURE_HIGH_BIT);
+    }
+    else
+    {
+        evse_error_clear(EVSE_ERR_TEMPERATURE_HIGH_BIT);
+    }
 }

components/evse/evse_fsm.c

@@ -1,3 +1,4 @@
+// components/evse/evse_fsm.c
 #include "evse_fsm.h"
 #include "evse_api.h"
 #include "evse_pilot.h"
@@ -17,16 +18,14 @@ static const char *TAG = "evse_fsm";
 #define MIN(a, b) ((a) < (b) ? (a) : (b))
 #endif
 
-static bool c1_d1_waiting = false;
-static TickType_t c1_d1_relay_to = 0;
-
 void evse_fsm_reset(void)
 {
     evse_set_state(EVSE_STATE_A);
-    c1_d1_waiting = false;
-    c1_d1_relay_to = 0;
 }
 
+/**
+ * @brief Atualiza saídas de hardware (pilot, relé, trava) em função do estado lógico.
+ */
 static void update_outputs(evse_state_t state)
 {
     const uint16_t current = evse_get_runtime_charging_current();
@@ -38,7 +37,7 @@ static void update_outputs(evse_state_t state)
         cable_max_current = proximity_get_max_current();
     }
 
-    // Segurança: relé sempre off e outputs seguros em caso de erro
+    // Segurança total: qualquer erro ativo força saída segura
     if (evse_get_error() != 0)
     {
         if (ac_relay_get_state())
@@ -46,8 +45,14 @@ static void update_outputs(evse_state_t state)
             ac_relay_set_state(false);
             ESP_LOGW(TAG, "ERRO ativo: relé estava ligado, agora desligado por segurança!");
         }
-        ac_relay_set_state(false);
+        else
+        {
+            ac_relay_set_state(false);
+        }
+
+        // Em erro, garantir pilot OFF (não PWM / não +12V)
         pilot_set_level(true);
+
         if (board_config.socket_lock && socket_outlet)
         {
             socket_lock_set_locked(false);
@@ -55,14 +60,16 @@ static void update_outputs(evse_state_t state)
         return;
     }
 
-    // Fluxo normal
     switch (state)
     {
     case EVSE_STATE_A:
     case EVSE_STATE_E:
     case EVSE_STATE_F:
         ac_relay_set_state(false);
+
+        // A → pilot alto (+12V), E/F → pilot OFF
         pilot_set_level(state == EVSE_STATE_A);
+
         if (board_config.socket_lock && socket_outlet)
         {
             socket_lock_set_locked(false);
@@ -72,66 +79,77 @@ static void update_outputs(evse_state_t state)
     case EVSE_STATE_B1:
         pilot_set_level(true);
         ac_relay_set_state(false);
+
         if (board_config.socket_lock && socket_outlet)
         {
             socket_lock_set_locked(true);
         }
 
-        if (rcm_test())
+        (void)rcm_test();
-        {
-            // ESP_LOGI(TAG, "RCM self test passed");
-        }
-        else
-        {
-            // ESP_LOGW(TAG, "RCM self test failed");
-        }
         break;
 
     case EVSE_STATE_B2:
         pilot_set_amps(MIN(current, cable_max_current));
         ac_relay_set_state(false);
+
+        if (board_config.socket_lock && socket_outlet)
+        {
+            socket_lock_set_locked(true);
+        }
         break;
 
     case EVSE_STATE_C1:
     case EVSE_STATE_D1:
-    {
         pilot_set_amps(MIN(current, cable_max_current));
         ac_relay_set_state(false);
-        c1_d1_waiting = true;
+
-        c1_d1_relay_to = xTaskGetTickCount() + pdMS_TO_TICKS(6000);
+        if (board_config.socket_lock && socket_outlet)
+        {
+            socket_lock_set_locked(true);
+        }
         break;
-    }
 
     case EVSE_STATE_C2:
     case EVSE_STATE_D2:
         pilot_set_amps(MIN(current, cable_max_current));
         ac_relay_set_state(true);
+
+        if (board_config.socket_lock && socket_outlet)
+        {
+            socket_lock_set_locked(true);
+        }
         break;
     }
 }
 
-// FSM principal
+/**
+ * @brief Máquina de estados principal do EVSE (IEC 61851).
+ */
 void evse_fsm_process(
     pilot_voltage_t pilot_voltage,
     bool authorized,
     bool available,
     bool enabled)
 {
-    // Proteção total: erro força F sempre!
+    // 1) Erros globais: dominam qualquer outra lógica
-    if (evse_get_error() != 0)
+    uint32_t err_bits = evse_get_error();
+    if (err_bits != 0)
     {
-        if (evse_get_state() != EVSE_STATE_F)
+        evse_state_t forced_state =
+            (err_bits & EVSE_ERR_PILOT_FAULT_BIT) ? EVSE_STATE_E : EVSE_STATE_F;
+
+        if (evse_get_state() != forced_state)
         {
-            ESP_LOGW(TAG, "Erro ativo detectado: forçando estado FAULT (F)");
+            ESP_LOGW(TAG, "Erro ativo detectado: forçando estado %s",
-            evse_set_state(EVSE_STATE_F);
+                     evse_state_to_str(forced_state));
+            evse_set_state(forced_state);
         }
-        update_outputs(EVSE_STATE_F);
+
+        update_outputs(forced_state);
         return;
     }
 
-    TickType_t now = xTaskGetTickCount();
+    evse_state_t curr = evse_get_state();
-    evse_state_t prev = evse_get_state();
-    evse_state_t curr = prev;
 
     switch (curr)
     {
@@ -153,17 +171,25 @@ void evse_fsm_process(
             evse_set_state(EVSE_STATE_F);
             break;
         }
+
         switch (pilot_voltage)
         {
         case PILOT_VOLTAGE_12:
             evse_set_state(EVSE_STATE_A);
             break;
+
         case PILOT_VOLTAGE_9:
             evse_set_state((authorized && enabled) ? EVSE_STATE_B2 : EVSE_STATE_B1);
             break;
+
         case PILOT_VOLTAGE_6:
             evse_set_state((authorized && enabled) ? EVSE_STATE_C2 : EVSE_STATE_C1);
             break;
+
+        case PILOT_VOLTAGE_3:
+            evse_set_state((authorized && enabled) ? EVSE_STATE_D2 : EVSE_STATE_D1);
+            break;
+
         default:
             break;
         }
@@ -171,52 +197,59 @@ void evse_fsm_process(
 
     case EVSE_STATE_C1:
     case EVSE_STATE_D1:
-        if (c1_d1_waiting && now >= c1_d1_relay_to)
-        {
-            ac_relay_set_state(false);
-            c1_d1_waiting = false;
-            if (!available)
-            {
-                evse_set_state(EVSE_STATE_F);
-                break;
-            }
-        }
-        __attribute__((fallthrough));
-
     case EVSE_STATE_C2:
     case EVSE_STATE_D2:
-        if (!enabled || !available)
+        if (!available)
         {
-            evse_set_state((curr == EVSE_STATE_D2 || curr == EVSE_STATE_D1)
+            evse_set_state(EVSE_STATE_F);
-                               ? EVSE_STATE_D1
-                               : EVSE_STATE_C1);
             break;
         }
+
+        if (!enabled)
+        {
+            if (curr == EVSE_STATE_C2)
+            {
+                evse_set_state(EVSE_STATE_C1);
+            }
+            else if (curr == EVSE_STATE_D2)
+            {
+                evse_set_state(EVSE_STATE_D1);
+            }
+            break;
+        }
+
         switch (pilot_voltage)
         {
         case PILOT_VOLTAGE_6:
             evse_set_state((authorized && enabled) ? EVSE_STATE_C2 : EVSE_STATE_C1);
             break;
+
         case PILOT_VOLTAGE_3:
             evse_set_state((authorized && enabled) ? EVSE_STATE_D2 : EVSE_STATE_D1);
             break;
+
         case PILOT_VOLTAGE_9:
             evse_set_state((authorized && enabled) ? EVSE_STATE_B2 : EVSE_STATE_B1);
             break;
+
         case PILOT_VOLTAGE_12:
             evse_set_state(EVSE_STATE_A);
             break;
+
         default:
             break;
         }
         break;
 
     case EVSE_STATE_E:
-        // Estado elétrico grave: só reset manual
+        // ✅ Agora recupera como F: se disponível e sem erro -> volta a A
+        if (available && evse_get_error() == 0)
+        {
+            evse_set_state(EVSE_STATE_A);
+        }
         break;
 
     case EVSE_STATE_F:
-        // Fault: só sai se disponível e sem erro
         if (available && evse_get_error() == 0)
         {
             evse_set_state(EVSE_STATE_A);

components/evse/evse_limits.c

@@ -1,34 +1,123 @@
-#include <inttypes.h>  // for PRIu32
+#include <inttypes.h>
+#include <stdbool.h>
+
 #include "evse_state.h"
 #include "evse_api.h"
 #include "evse_limits.h"
 #include "evse_meter.h"
 #include "evse_session.h"
+
 #include "esp_log.h"
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "esp_err.h"
-#include "nvs.h"
+#include "esp_check.h"
 
-// ========================
+#include "storage_service.h"
-// Concurrency protection
+
-// ========================
+#define NVS_NAMESPACE "evse_limits"
+static const char *TAG = "evse_limits";
 
 static portMUX_TYPE evse_mux = portMUX_INITIALIZER_UNLOCKED;
 
-// ========================
+static bool limit_reached = false;
-// Runtime state (volatile)
+static uint32_t consumption_limit = 0;   // Wh
-// ========================
+static uint32_t charging_time_limit = 0; // seconds
+static uint16_t under_power_limit = 0;   // W
 
-static bool     limit_reached       = false;
+static inline TickType_t TO_TICKS_MS(uint32_t ms) { return pdMS_TO_TICKS(ms); }
-static uint32_t consumption_limit   = 0;   // Energy limit in Wh
+static inline TickType_t BOOT_TO(void) { return TO_TICKS_MS(1000); }
-static uint32_t charging_time_limit = 0;   // Time limit in seconds
-static uint16_t under_power_limit   = 0;   // Minimum acceptable power in W
 
-// ========================
+// ---------------------------------
-// Limit status flag
+// Init + defaults
-// ========================
+// ---------------------------------
+esp_err_t evse_limits_init(void)
+{
+    ESP_RETURN_ON_ERROR(storage_service_init(), TAG, "storage init failed");
+    ESP_LOGI(TAG, "EVSE limits init OK (storage-backed)");
+    return ESP_OK;
+}
 
+void evse_limits_check_defaults(void)
+{
+    esp_err_t err;
+    bool needs_flush = false;
+
+    uint32_t u32 = 0;
+    uint16_t u16 = 0;
+
+    ESP_LOGD(TAG, "Checking default limits...");
+
+    // Consumption limit (Wh) default = 0 (disabled)
+    err = storage_get_u32_sync(NVS_NAMESPACE, "def_cons_lim", &u32, BOOT_TO());
+    if (err == ESP_OK)
+    {
+        portENTER_CRITICAL(&evse_mux);
+        consumption_limit = u32;
+        portEXIT_CRITICAL(&evse_mux);
+    }
+    else
+    {
+        portENTER_CRITICAL(&evse_mux);
+        consumption_limit = 0;
+        portEXIT_CRITICAL(&evse_mux);
+
+        (void)storage_set_u32_async(NVS_NAMESPACE, "def_cons_lim", 0);
+        needs_flush = true;
+        ESP_LOGW(TAG, "Missing def_cons_lim (%s) -> default=0 (persisted).", esp_err_to_name(err));
+    }
+
+    // Charging time limit (s) default = 0 (disabled)
+    err = storage_get_u32_sync(NVS_NAMESPACE, "def_ch_time_lim", &u32, BOOT_TO());
+    if (err == ESP_OK)
+    {
+        portENTER_CRITICAL(&evse_mux);
+        charging_time_limit = u32;
+        portEXIT_CRITICAL(&evse_mux);
+    }
+    else
+    {
+        portENTER_CRITICAL(&evse_mux);
+        charging_time_limit = 0;
+        portEXIT_CRITICAL(&evse_mux);
+
+        (void)storage_set_u32_async(NVS_NAMESPACE, "def_ch_time_lim", 0);
+        needs_flush = true;
+        ESP_LOGW(TAG, "Missing def_ch_time_lim (%s) -> default=0 (persisted).", esp_err_to_name(err));
+    }
+
+    // Under-power limit (W) default = 0 (disabled)
+    err = storage_get_u16_sync(NVS_NAMESPACE, "def_un_pwr_lim", &u16, BOOT_TO());
+    if (err == ESP_OK)
+    {
+        portENTER_CRITICAL(&evse_mux);
+        under_power_limit = u16;
+        portEXIT_CRITICAL(&evse_mux);
+    }
+    else
+    {
+        portENTER_CRITICAL(&evse_mux);
+        under_power_limit = 0;
+        portEXIT_CRITICAL(&evse_mux);
+
+        (void)storage_set_u16_async(NVS_NAMESPACE, "def_un_pwr_lim", 0);
+        needs_flush = true;
+        ESP_LOGW(TAG, "Missing def_un_pwr_lim (%s) -> default=0 (persisted).", esp_err_to_name(err));
+    }
+
+    if (needs_flush)
+    {
+        esp_err_t fe = storage_flush_sync(TO_TICKS_MS(2000));
+        if (fe != ESP_OK)
+            ESP_LOGE(TAG, "storage_flush_sync failed: %s", esp_err_to_name(fe));
+        else
+            ESP_LOGD(TAG, "Defaults committed (flush).");
+    }
+}
+
+// ---------------------------------
+// Limit reached flag
+// ---------------------------------
 bool evse_get_limit_reached(void)
 {
     bool val;
@@ -50,10 +139,9 @@ bool evse_is_limit_reached(void)
     return evse_get_limit_reached();
 }
 
-// ========================
+// ---------------------------------
-// Runtime limit accessors
+// Consumption limit
-// ========================
+// ---------------------------------
-
 uint32_t evse_get_consumption_limit(void)
 {
     uint32_t val;
@@ -78,30 +166,18 @@ void evse_set_consumption_limit(uint32_t value)
     if (!changed)
         return;
 
-    nvs_handle_t h;
+    esp_err_t err = storage_set_u32_async(NVS_NAMESPACE, "def_cons_lim", value);
-    esp_err_t err = nvs_open("evse", NVS_READWRITE, &h);
+    if (err != ESP_OK)
-    if (err == ESP_OK)
     {
-        err = nvs_set_u32(h, "def_cons_lim", value);
+        ESP_LOGE(TAG,
-        if (err == ESP_OK)
+                 "Failed to persist consumption limit (%" PRIu32 " Wh): %s",
-            err = nvs_commit(h);
+                 value, esp_err_to_name(err));
-        nvs_close(h);
-
-        if (err != ESP_OK)
-        {
-            ESP_LOGE("EVSE_LIMITS",
-                     "Failed to persist consumption limit (%" PRIu32 " Wh): %s",
-                     value, esp_err_to_name(err));
-        }
-    }
-    else
-    {
-        ESP_LOGE("EVSE_LIMITS",
-                 "Failed to open NVS for consumption limit: %s",
-                 esp_err_to_name(err));
     }
 }
 
+// ---------------------------------
+// Charging time limit
+// ---------------------------------
 uint32_t evse_get_charging_time_limit(void)
 {
     uint32_t val;
@@ -126,30 +202,18 @@ void evse_set_charging_time_limit(uint32_t value)
     if (!changed)
         return;
 
-    nvs_handle_t h;
+    esp_err_t err = storage_set_u32_async(NVS_NAMESPACE, "def_ch_time_lim", value);
-    esp_err_t err = nvs_open("evse", NVS_READWRITE, &h);
+    if (err != ESP_OK)
-    if (err == ESP_OK)
     {
-        err = nvs_set_u32(h, "def_ch_time_lim", value);
+        ESP_LOGE(TAG,
-        if (err == ESP_OK)
+                 "Failed to persist charging time limit (%" PRIu32 " s): %s",
-            err = nvs_commit(h);
+                 value, esp_err_to_name(err));
-        nvs_close(h);
-
-        if (err != ESP_OK)
-        {
-            ESP_LOGE("EVSE_LIMITS",
-                     "Failed to persist charging time limit (%" PRIu32 " s): %s",
-                     value, esp_err_to_name(err));
-        }
-    }
-    else
-    {
-        ESP_LOGE("EVSE_LIMITS",
-                 "Failed to open NVS for charging time limit: %s",
-                 esp_err_to_name(err));
     }
 }
 
+// ---------------------------------
+// Under-power limit
+// ---------------------------------
 uint16_t evse_get_under_power_limit(void)
 {
     uint16_t val;
@@ -174,82 +238,64 @@ void evse_set_under_power_limit(uint16_t value)
     if (!changed)
         return;
 
-    nvs_handle_t h;
+    esp_err_t err = storage_set_u16_async(NVS_NAMESPACE, "def_un_pwr_lim", value);
-    esp_err_t err = nvs_open("evse", NVS_READWRITE, &h);
+    if (err != ESP_OK)
-    if (err == ESP_OK)
     {
-        err = nvs_set_u16(h, "def_un_pwr_lim", value);
+        ESP_LOGE(TAG,
-        if (err == ESP_OK)
+                 "Failed to persist under-power limit (%" PRIu32 " W): %s",
-            err = nvs_commit(h);
+                 (uint32_t)value, esp_err_to_name(err));
-        nvs_close(h);
-
-        if (err != ESP_OK)
-        {
-            ESP_LOGE("EVSE_LIMITS",
-                     "Failed to persist under-power limit (%" PRIu32 " W): %s",
-                     (uint32_t)value, esp_err_to_name(err));
-        }
-    }
-    else
-    {
-        ESP_LOGE("EVSE_LIMITS",
-                 "Failed to open NVS for under-power limit: %s",
-                 esp_err_to_name(err));
     }
 }
 
-// ========================
+// ---------------------------------
-// Limit checking logic
+// Runtime check
-// ========================
+// ---------------------------------
-
 void evse_limits_check(void)
 {
-    // Só faz sentido durante carregamento
+    // Só faz sentido quando há energia ativa (C2/D2)
     if (!evse_state_is_charging(evse_get_state()))
-    {
         return;
-    }
 
     evse_session_t sess;
     if (!evse_session_get(&sess) || !sess.is_current)
-    {
-        // Sem sessão ativa → nada a fazer
         return;
-    }
+
+    uint32_t cons_lim;
+    uint32_t time_lim;
+    uint16_t unp_lim;
+
+    portENTER_CRITICAL(&evse_mux);
+    cons_lim = consumption_limit;
+    time_lim = charging_time_limit;
+    unp_lim  = under_power_limit;
+    portEXIT_CRITICAL(&evse_mux);
 
     bool reached = false;
 
-    // 1) Limite de energia (Wh)
+    if (cons_lim > 0 && sess.energy_wh >= cons_lim)
-    if (consumption_limit > 0 && sess.energy_wh >= consumption_limit)
     {
-        ESP_LOGW("EVSE_LIMITS",
+        ESP_LOGW(TAG, "Energy limit reached: %" PRIu32 " Wh ≥ %" PRIu32 " Wh",
-                 "Energy limit reached: %" PRIu32 " Wh ≥ %" PRIu32 " Wh",
+                 sess.energy_wh, cons_lim);
-                 sess.energy_wh, consumption_limit);
         reached = true;
     }
 
-    // 2) Limite de tempo (s)
+    if (time_lim > 0 && sess.duration_s >= time_lim)
-    if (charging_time_limit > 0 && sess.duration_s >= charging_time_limit)
     {
-        ESP_LOGW("EVSE_LIMITS",
+        ESP_LOGW(TAG, "Charging time limit reached: %" PRIu32 " s ≥ %" PRIu32 " s",
-                 "Charging time limit reached: %" PRIu32 " s ≥ %" PRIu32 " s",
+                 sess.duration_s, time_lim);
-                 sess.duration_s, charging_time_limit);
         reached = true;
     }
 
-    // 3) Under-power (potência instantânea)
+    int32_t p = evse_meter_get_instant_power();
-    uint32_t inst_power = evse_meter_get_instant_power();
+    uint32_t inst_power = (p > 0) ? (uint32_t)p : 0;
-    if (under_power_limit > 0 && inst_power < under_power_limit)
+
+    if (unp_lim > 0 && inst_power < (uint32_t)unp_lim)
     {
-        ESP_LOGW("EVSE_LIMITS",
+        ESP_LOGW(TAG, "Under-power limit reached: %" PRIu32 " W < %" PRIu32 " W",
-                 "Under-power limit reached: %" PRIu32 " W < %" PRIu32 " W",
+                 inst_power, (uint32_t)unp_lim);
-                 (uint32_t)inst_power,
-                 (uint32_t)under_power_limit);
         reached = true;
     }
 
     if (reached)
-    {
         evse_set_limit_reached(true);
-    }
 }

components/evse/evse_manager.c

@@ -1,4 +1,3 @@
-// === Início de: components/evse/evse_manager.c ===
 #include "evse_manager.h"
 #include "evse_state.h"
 #include "evse_error.h"
@@ -11,10 +10,10 @@
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "freertos/semphr.h"
-#include "freertos/queue.h"
 
 #include "esp_log.h"
 #include "esp_event.h"
+#include "esp_err.h"
 
 #include <string.h>
 #include <inttypes.h>
@@ -23,31 +22,38 @@
 #include "loadbalancer_events.h"
 #include "ocpp_events.h"
 #include "scheduler_events.h"
+#include "evse_link_events.h"
+
 
 static const char *TAG = "EVSE_Manager";
 
 static SemaphoreHandle_t evse_mutex;
-static volatile bool auth_enabled = false;
+
+// ✅ Proteção para flags partilhadas (event handlers vs task)
+static portMUX_TYPE s_mgr_mux = portMUX_INITIALIZER_UNLOCKED;
+static bool auth_enabled = false;
+static char s_pending_ocpp_tag[AUTH_TAG_MAX_LEN];
 
 // Estado de pausa controlado pelo Load Balancer
-static volatile bool lb_paused = false;
+static bool lb_paused = false;
-static volatile bool lb_prev_authorized = false;
+static bool lb_prev_authorized = false;
 
 // Estado de janela do scheduler
-static volatile bool s_sched_allowed = true;
+static bool s_sched_allowed = true;
 static portMUX_TYPE s_sched_mux = portMUX_INITIALIZER_UNLOCKED;
 
 #define EVSE_MANAGER_TICK_PERIOD_MS 1000 // 1 segundo
 
-// ================= Helpers internos =================
+static uint16_t s_sched_current_a = 0;
 
 static void lb_clear_pause_state(void)
 {
+    portENTER_CRITICAL(&s_mgr_mux);
     lb_paused = false;
     lb_prev_authorized = false;
+    portEXIT_CRITICAL(&s_mgr_mux);
 }
 
-// Exposto para outros módulos (se quiserem saber se o scheduler permite)
 bool evse_sched_is_allowed(void)
 {
     bool v;
@@ -57,52 +63,142 @@ bool evse_sched_is_allowed(void)
     return v;
 }
 
+static void on_evse_link_event(void *arg, esp_event_base_t base, int32_t id, void *data)
+{
+    (void)arg;
+
+    if (base != EVSE_LINK_EVENTS || id != LINK_EVENT_CURRENT_LIMIT_APPLIED || data == NULL)
+        return;
+
+    uint16_t current = *(const uint16_t *)data;
+
+    ESP_LOGI(TAG, "[EVSE-LINK] current limit applied: %uA", current);
+
+    if (current == 0)
+    {
+        bool prev_auth = evse_state_get_authorized();
+
+        portENTER_CRITICAL(&s_mgr_mux);
+        lb_paused = true;
+        lb_prev_authorized = prev_auth;
+        portEXIT_CRITICAL(&s_mgr_mux);
+
+        if (prev_auth)
+        {
+            ESP_LOGI(TAG, "[EVSE-LINK] limit=0A → paused by master");
+            evse_state_set_authorized(false);
+        }
+
+        return;
+    }
+
+    evse_set_runtime_charging_current(current);
+
+    bool was_paused;
+    bool prev_auth;
+    bool local_auth_enabled;
+
+    portENTER_CRITICAL(&s_mgr_mux);
+    was_paused = lb_paused;
+    prev_auth = lb_prev_authorized;
+    local_auth_enabled = auth_enabled;
+    lb_paused = false;
+    lb_prev_authorized = false;
+    portEXIT_CRITICAL(&s_mgr_mux);
+
+    if (was_paused)
+    {
+        bool can_resume =
+            (evse_get_error() == 0) &&
+            evse_config_is_available() &&
+            evse_config_is_enabled() &&
+            evse_sched_is_allowed() &&
+            !evse_is_limit_reached();
+
+        if (!can_resume)
+        {
+            ESP_LOGW(TAG, "[EVSE-LINK] limit=%uA → cannot resume", current);
+            return;
+        }
+
+        if (!local_auth_enabled || prev_auth)
+        {
+            ESP_LOGI(TAG, "[EVSE-LINK] limit=%uA → resuming after master pause", current);
+            evse_state_set_authorized(true);
+        }
+    }
+}
+
 static void evse_manager_handle_auth_on_tick(void)
 {
     bool sched_allowed = evse_sched_is_allowed();
+    uint32_t err_bits = evse_get_error(); // inclui holdoff interno
+    bool has_error = (err_bits != 0);
 
-    if (auth_enabled)
+    bool local_auth_enabled;
+    bool local_lb_paused;
+
+    portENTER_CRITICAL(&s_mgr_mux);
+    local_auth_enabled = auth_enabled;
+    local_lb_paused = lb_paused;
+    portEXIT_CRITICAL(&s_mgr_mux);
+
+    if (local_auth_enabled)
     {
-        // Se o carro foi desconectado, revoga autorização
         if (evse_state_get_authorized() && evse_get_state() == EVSE_STATE_A)
         {
             ESP_LOGI(TAG, "Vehicle disconnected → revoking authorization.");
+            evse_session_clear_authorized_tag();
+            evse_state_set_authorized(false);
+            lb_clear_pause_state();
+        }
+
+        if (has_error && evse_state_get_authorized())
+        {
+            ESP_LOGI(TAG,
+                     "[AUTH] error active (err=0x%08" PRIx32 ") → revoking authorization.",
+                     err_bits);
+            evse_session_clear_authorized_tag();
             evse_state_set_authorized(false);
-            // Desconexão física invalida qualquer pausa pendente do LB
             lb_clear_pause_state();
         }
 
-        // Em modos RFID/OCPP, o scheduler pode também forçar paragem
         if (!sched_allowed && evse_state_get_authorized())
         {
             ESP_LOGI(TAG, "[SCHED] window closed (auth mode) → revoking authorization.");
+            evse_session_clear_authorized_tag();
             evse_state_set_authorized(false);
         }
     }
     else
     {
-        // Modo OPEN: só autoriza se LB e Scheduler permitirem
+        bool limit_hit = evse_is_limit_reached();
-        if (!lb_paused && sched_allowed && !evse_state_get_authorized())
+        bool can_operate = evse_config_is_available() && evse_config_is_enabled();
+
+        if ((has_error || limit_hit || !sched_allowed || !can_operate || local_lb_paused) &&
+            evse_state_get_authorized())
         {
-            evse_state_set_authorized(true);
+            ESP_LOGI(TAG,
-            ESP_LOGI(TAG, "Authentication disabled → forced authorization (within schedule).");
+                     "[OPEN] blocking (err=%d limit=%d sched=%d operate=%d lb_paused=%d) → revoking authorization.",
-            lb_clear_pause_state();
+                     (int)has_error, (int)limit_hit, (int)sched_allowed, (int)can_operate, (int)local_lb_paused);
+            evse_state_set_authorized(false);
         }
 
-        // Fora da janela, garantir que não fica autorizado
+        if (!local_lb_paused && sched_allowed && can_operate &&
-        if (!sched_allowed && evse_state_get_authorized())
+            !has_error && !limit_hit &&
+            !evse_state_get_authorized())
         {
-            ESP_LOGI(TAG, "[SCHED] window closed (OPEN mode) → revoking authorization.");
+            evse_session_clear_authorized_tag();
-            evse_state_set_authorized(false);
+            evse_state_set_authorized(true);
+            ESP_LOGI(TAG, "Authentication disabled → forced authorization (schedule ok, no error/limits).");
+            lb_clear_pause_state();
         }
     }
 }
 
-// ===== Task de ciclo principal =====
 static void evse_manager_task(void *arg)
 {
     (void)arg;
-
     while (true)
     {
         evse_manager_tick();
@@ -110,56 +206,61 @@ static void evse_manager_task(void *arg)
     }
 }
 
-// ===== Tratador de eventos de AUTH =====
 static void on_auth_event(void *arg, esp_event_base_t base, int32_t id, void *data)
 {
     (void)arg;
-
     if (base != AUTH_EVENTS || !data)
         return;
 
-    auth_mode_t g_mode = AUTH_MODE_OPEN;
-
     switch (id)
     {
     case AUTH_EVENT_TAG_PROCESSED:
     {
         const auth_tag_event_data_t *evt = (const auth_tag_event_data_t *)data;
         ESP_LOGI(TAG, "Tag %s -> %s", evt->tag, evt->authorized ? "AUTHORIZED" : "DENIED");
+        if (evt->authorized)
+        {
+            evse_session_set_authorized_tag(evt->tag);
+        }
+        else
+        {
+            evse_session_clear_authorized_tag();
+        }
         evse_state_set_authorized(evt->authorized);
-
-        // Qualquer alteração explícita de auth invalida pausa do LB
         lb_clear_pause_state();
         break;
     }
 
+    case AUTH_EVENT_TAG_VERIFY:
+    {
+        const auth_tag_verify_event_t *evt = (const auth_tag_verify_event_t *)data;
+        ESP_LOGI(TAG, "Tag %s -> pending remote/OCPP verification", evt->tag);
+        portENTER_CRITICAL(&s_mgr_mux);
+        strncpy(s_pending_ocpp_tag, evt->tag, AUTH_TAG_MAX_LEN - 1);
+        s_pending_ocpp_tag[AUTH_TAG_MAX_LEN - 1] = '\0';
+        portEXIT_CRITICAL(&s_mgr_mux);
+        break;
+    }
+
     case AUTH_EVENT_MODE_CHANGED:
     case AUTH_EVENT_INIT:
     {
         const auth_mode_event_data_t *evt = (const auth_mode_event_data_t *)data;
-        g_mode = evt->mode;
+        ESP_LOGI(TAG, "Auth mode = %s", auth_mode_to_str(evt->mode));
-        ESP_LOGI(TAG, "Auth mode = %s", auth_mode_to_str(g_mode));
-        if (g_mode == AUTH_MODE_OPEN)
-        {
-            // Em OPEN, a autorização passa a ser gerida por evse_manager_handle_auth_on_tick(),
-            // que também respeita o scheduler.
-            evse_state_set_authorized(false); // vai ser forçado no próximo tick se permitido
-            auth_enabled = false;
-        }
-        else
-        {
-            evse_state_set_authorized(false);
-            auth_enabled = true;
-        }
 
-        // Modo mudou -> qualquer pausa antiga deixa de fazer sentido
+        portENTER_CRITICAL(&s_mgr_mux);
+        auth_enabled = (evt->mode != AUTH_MODE_OPEN);
+        s_pending_ocpp_tag[0] = '\0';
+        portEXIT_CRITICAL(&s_mgr_mux);
+
+        evse_session_clear_authorized_tag();
+        evse_state_set_authorized(false);
         lb_clear_pause_state();
         break;
     }
     }
 }
 
-// ===== Tratador de eventos de Load Balancer =====
 static void on_loadbalancer_event(void *handler_arg, esp_event_base_t event_base,
                                   int32_t event_id, void *event_data)
 {
@@ -181,143 +282,143 @@ static void on_loadbalancer_event(void *handler_arg, esp_event_base_t event_base
         const loadbalancer_master_limit_event_t *evt =
             (const loadbalancer_master_limit_event_t *)event_data;
 
-        ESP_LOGI(TAG,
+        ESP_LOGI(TAG, "Novo limite de corrente (master): %u A (ts: %lld)",
-                 "Novo limite de corrente (master): %u A (ts: %lld)",
                  evt->max_current, (long long)evt->timestamp_us);
 
         if (evt->max_current == 0)
         {
-            // Suspensão por LB (não interessa se é OPEN ou RFID/OCPP)
+            bool prev_auth = evse_state_get_authorized();
-            lb_paused = true;
-            lb_prev_authorized = evse_state_get_authorized();
 
-            if (lb_prev_authorized)
+            portENTER_CRITICAL(&s_mgr_mux);
+            lb_paused = true;
+            lb_prev_authorized = prev_auth;
+            portEXIT_CRITICAL(&s_mgr_mux);
+
+            if (prev_auth)
             {
                 ESP_LOGI(TAG, "[LB] limit=0A → pausando sessão (authorized=false)");
                 evse_state_set_authorized(false);
             }
-            else
-            {
-                ESP_LOGD(TAG, "[LB] limit=0A → já não estava autorizado");
-            }
         }
         else
         {
-            // Ajusta corrente em runtime
             evse_set_runtime_charging_current(evt->max_current);
 
-            if (lb_paused)
+            bool was_paused;
-            {
+            bool prev_auth;
-                lb_paused = false;
 
-                // Só retomamos se EVSE estiver operacional e scheduler permitir
+            portENTER_CRITICAL(&s_mgr_mux);
+            was_paused = lb_paused;
+            prev_auth = lb_prev_authorized;
+            portEXIT_CRITICAL(&s_mgr_mux);
+
+            if (was_paused)
+            {
                 bool can_resume =
                     (evse_get_error() == 0) &&
                     evse_config_is_available() &&
                     evse_config_is_enabled() &&
-                    evse_sched_is_allowed();
+                    evse_sched_is_allowed() &&
+                    !evse_is_limit_reached();
 
                 if (!can_resume)
                 {
                     ESP_LOGW(TAG,
-                             "[LB] limit=%uA → não retoma automaticamente (erro/indisponível/desabilitado/fora de horário)",
+                             "[LB] limit=%uA → não retoma automaticamente (erro/indisp/desab/fora de horário/limite)",
                              evt->max_current);
                     lb_clear_pause_state();
                     return;
                 }
 
-                if (!auth_enabled)
+                bool local_auth_enabled;
+                portENTER_CRITICAL(&s_mgr_mux);
+                local_auth_enabled = auth_enabled;
+                lb_paused = false; // já vai tentar retomar
+                portEXIT_CRITICAL(&s_mgr_mux);
+
+                if (!local_auth_enabled)
                 {
-                    // Modo OPEN: retoma sempre (se dentro da janela do scheduler)
+                    ESP_LOGI(TAG, "[LB] limit=%uA → modo OPEN, reautorizando", evt->max_current);
-                    ESP_LOGI(TAG,
-                             "[LB] limit=%uA → modo OPEN, reautorizando (authorized=true)",
-                             evt->max_current);
                     evse_state_set_authorized(true);
                 }
                 else
                 {
-                    // RFID/OCPP: só retoma se havia autorização antes da pausa
+                    if (prev_auth)
-                    if (lb_prev_authorized)
                     {
-                        ESP_LOGI(TAG,
+                        ESP_LOGI(TAG, "[LB] limit=%uA → RFID/OCPP, retomando autorização anterior", evt->max_current);
-                                 "[LB] limit=%uA → RFID/OCPP, retomando autorização anterior (auto-resume)",
-                                 evt->max_current);
                         evse_state_set_authorized(true);
                     }
-                    else
-                    {
-                        ESP_LOGI(TAG,
-                                 "[LB] limit=%uA → RFID/OCPP, sem autorização prévia, mantendo estado atual",
-                                 evt->max_current);
-                    }
                 }
 
-                // Limpa estado prévio (não reaplicar em pausas futuras)
+                portENTER_CRITICAL(&s_mgr_mux);
                 lb_prev_authorized = false;
-            }
+                portEXIT_CRITICAL(&s_mgr_mux);
-            else
-            {
-                // Caso normal: apenas ajuste de corrente, sem mexer em auth
-                ESP_LOGD(TAG,
-                         "[LB] limit=%uA → ajustando corrente runtime (sem mudança de autorização)",
-                         evt->max_current);
             }
         }
     }
 }
 
-// ===== Tratador de eventos de OCPP =====
 static void on_ocpp_event(void *arg, esp_event_base_t base, int32_t id, void *data)
 {
     (void)arg;
-
     if (base != OCPP_EVENTS)
         return;
 
     switch (id)
     {
     case OCPP_EVENT_AUTHORIZED:
-        ESP_LOGI(TAG, "[OCPP] Authorized");
+    {
+        char tag[AUTH_TAG_MAX_LEN];
+
+        portENTER_CRITICAL(&s_mgr_mux);
+        strncpy(tag, s_pending_ocpp_tag, AUTH_TAG_MAX_LEN - 1);
+        tag[AUTH_TAG_MAX_LEN - 1] = '\0';
+        s_pending_ocpp_tag[0] = '\0';
+        portEXIT_CRITICAL(&s_mgr_mux);
+
+        if (tag[0] != '\0')
+        {
+            evse_session_set_authorized_tag(tag);
+            ESP_LOGI(TAG, "[OCPP] Authorized tag=%s", tag);
+        }
+        else
+        {
+            ESP_LOGI(TAG, "[OCPP] Authorized");
+        }
+
         evse_state_set_authorized(true);
         lb_clear_pause_state();
         break;
+    }
 
     case OCPP_EVENT_AUTH_REJECTED:
-        ESP_LOGW(TAG, "[OCPP] Authorization rejected");
-        evse_state_set_authorized(false);
-        lb_clear_pause_state();
-        break;
-
     case OCPP_EVENT_AUTH_TIMEOUT:
-        ESP_LOGW(TAG, "[OCPP] Authorization timeout");
+    case OCPP_EVENT_REMOTE_STOP:
+    case OCPP_EVENT_STOP_TX:
+        ESP_LOGW(TAG, "[OCPP] Authorization/Stop");
+        portENTER_CRITICAL(&s_mgr_mux);
+        s_pending_ocpp_tag[0] = '\0';
+        portEXIT_CRITICAL(&s_mgr_mux);
+        evse_session_clear_authorized_tag();
         evse_state_set_authorized(false);
         lb_clear_pause_state();
         break;
 
     case OCPP_EVENT_REMOTE_START:
         ESP_LOGI(TAG, "[OCPP] RemoteStart");
+        portENTER_CRITICAL(&s_mgr_mux);
+        s_pending_ocpp_tag[0] = '\0';
+        portEXIT_CRITICAL(&s_mgr_mux);
+        evse_session_clear_authorized_tag();
         evse_state_set_authorized(true);
         lb_clear_pause_state();
         break;
 
-    case OCPP_EVENT_REMOTE_STOP:
-        ESP_LOGI(TAG, "[OCPP] RemoteStop");
-        evse_state_set_authorized(false);
-        lb_clear_pause_state();
-        break;
-
     case OCPP_EVENT_START_TX:
         ESP_LOGI(TAG, "[OCPP] StartTx");
         lb_clear_pause_state();
         break;
 
-    case OCPP_EVENT_STOP_TX:
-        ESP_LOGI(TAG, "[OCPP] StopTx");
-        evse_state_set_authorized(false);
-        lb_clear_pause_state();
-        break;
-
-    // ChangeAvailability remoto (operative/inoperative)
     case OCPP_EVENT_OPERATIVE_UPDATED:
     {
         if (!data)
@@ -329,7 +430,6 @@ static void on_ocpp_event(void *arg, esp_event_base_t base, int32_t id, void *da
         ESP_LOGI(TAG, "[OCPP] OperativeUpdated: operative=%d ts=%lld",
                  (int)ev->operative, (long long)ev->timestamp_us);
 
-        // Mapear operative → enabled local (persiste e emite EVSE_EVENT_ENABLE_UPDATED)
         evse_config_set_enabled(ev->operative);
         break;
     }
@@ -340,14 +440,9 @@ static void on_ocpp_event(void *arg, esp_event_base_t base, int32_t id, void *da
     }
 }
 
-// ===== Tratador de eventos de Scheduler =====
+static void on_sched_event(void *arg, esp_event_base_t base, int32_t id, void *data)
-static void on_sched_event(void *arg,
-                           esp_event_base_t base,
-                           int32_t id,
-                           void *data)
 {
     (void)arg;
-
     if (base != SCHED_EVENTS || data == NULL)
         return;
 
@@ -355,31 +450,37 @@ static void on_sched_event(void *arg,
 
     portENTER_CRITICAL(&s_sched_mux);
     s_sched_allowed = ev->allowed_now;
+    s_sched_current_a = ev->current_limit_a;
     portEXIT_CRITICAL(&s_sched_mux);
 
-    ESP_LOGI(TAG,
+    ESP_LOGI(TAG, "[SCHED] allowed_now=%d current=%uA",
-             "[SCHED] event id=%" PRIi32 " allowed_now=%d",
+             (int)ev->allowed_now, (unsigned)ev->current_limit_a);
-             id, (int)ev->allowed_now);
 
-    // Se a janela fechou, parar sessão (revogar autorização)
     if (!ev->allowed_now && evse_state_get_authorized())
     {
         ESP_LOGI(TAG, "[SCHED] window closed → stopping session (authorized=false)");
+        evse_session_clear_authorized_tag();
         evse_state_set_authorized(false);
     }
 
-    // Se a janela abriu de novo, não auto-reautorizamos aqui.
+    // ✅ aplica corrente quando permitido
-    // Deixamos que o utilizador / OCPP decida iniciar nova sessão.
+    if (ev->allowed_now && ev->current_limit_a > 0)
-    // (Em modo OPEN, o tick trata disso respeitando o scheduler.)
+    {
+        evse_set_runtime_charging_current(ev->current_limit_a);
+    }
 }
 
-// ===== Inicialização =====
 void evse_manager_init(void)
 {
     evse_mutex = xSemaphoreCreateMutex();
     configASSERT(evse_mutex != NULL);
 
-    evse_config_init();
+    esp_err_t err = evse_config_init();
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "Failed to init EVSE config NVS: %s", esp_err_to_name(err));
+    }
+
     evse_error_init();
     evse_hardware_init();
     evse_state_init();
@@ -390,14 +491,17 @@ void evse_manager_init(void)
     ESP_ERROR_CHECK(esp_event_handler_register(LOADBALANCER_EVENTS, ESP_EVENT_ANY_ID, &on_loadbalancer_event, NULL));
     ESP_ERROR_CHECK(esp_event_handler_register(OCPP_EVENTS, ESP_EVENT_ANY_ID, &on_ocpp_event, NULL));
     ESP_ERROR_CHECK(esp_event_handler_register(SCHED_EVENTS, ESP_EVENT_ANY_ID, &on_sched_event, NULL));
+    ESP_ERROR_CHECK(esp_event_handler_register(EVSE_LINK_EVENTS,
+                                           ESP_EVENT_ANY_ID,
+                                           &on_evse_link_event,
+                                           NULL));
 
     ESP_LOGI(TAG, "EVSE Manager inicializado.");
 
-    BaseType_t rc = xTaskCreate(evse_manager_task, "evse_manager_task", 4096, NULL, 5, NULL);
+    BaseType_t rc = xTaskCreate(evse_manager_task, "evse_manager_task", 8192, NULL, 4, NULL);
     configASSERT(rc == pdPASS);
 }
 
-// ===== Main Tick =====
 void evse_manager_tick(void)
 {
     xSemaphoreTake(evse_mutex, portMAX_DELAY);
@@ -412,5 +516,3 @@ void evse_manager_tick(void)
 
     xSemaphoreGive(evse_mutex);
 }
-
-// === Fim de: components/evse/evse_manager.c ===

components/evse/evse_pilot.c

@@ -1,8 +1,7 @@
+// components/evse/evse_pilot.c
 #include <stdbool.h>
 #include <stdint.h>
 #include <stdlib.h>
-#include <math.h>
-#include <string.h>
 
 #include "driver/ledc.h"
 #include "esp_err.h"
@@ -11,155 +10,309 @@
 
 #include "evse_pilot.h"
 #include "adc121s021_dma.h"
+#include "adc.h"
 #include "board_config.h"
 
-#define PILOT_PWM_TIMER         LEDC_TIMER_0
+#define PILOT_PWM_TIMER       LEDC_TIMER_0
-#define PILOT_PWM_CHANNEL       LEDC_CHANNEL_0
+#define PILOT_PWM_CHANNEL     LEDC_CHANNEL_0
-#define PILOT_PWM_SPEED_MODE    LEDC_LOW_SPEED_MODE
+#define PILOT_PWM_SPEED_MODE  LEDC_LOW_SPEED_MODE
-#define PILOT_PWM_DUTY_RES      LEDC_TIMER_10_BIT
+#define PILOT_PWM_DUTY_RES    LEDC_TIMER_10_BIT
-#define PILOT_PWM_MAX_DUTY      1023
+#define PILOT_PWM_MAX_DUTY    1023
 
-#define NUM_PILOT_SAMPLES       100
+// --- Configuração de amostragem do Pilot ---
-#define MAX_SAMPLE_ATTEMPTS     1000
+#define NUM_PILOT_SAMPLES     100
-#define PILOT_EXTREME_PERCENT   10  // 10% superior e inferior
+#define MAX_SAMPLE_ATTEMPTS   1000
 
-#define ADC121_VREF_MV          3300
+#define PILOT_SAMPLE_DELAY_US 10
-#define ADC121_MAX              4095
+
+// Percentagem para descartar extremos superior/inferior (ruído)
+#define PILOT_EXTREME_PERCENT 10 // 10% superior e inferior
+
+// Referência usada pelo ADC121S021 externo.
+// No ADC interno, o valor já é convertido para mV por adc_cali_raw_to_voltage().
+#define ADC121_VREF_MV 3300
+#define ADC121_MAX     4095
 
 static const char *TAG = "evse_pilot";
 
-static int last_pilot_level = -1;
+typedef enum {
-static uint32_t last_pwm_duty = 0;
+    PILOT_MODE_DC_HIGH = 0, // +12V (nível alto)
+    PILOT_MODE_DC_LOW,      // nível baixo / pilot desligado (dependente do hardware)
+    PILOT_MODE_PWM          // PWM ativo
+} pilot_mode_t;
 
-static int adc_raw_to_mv(uint16_t raw) {
+static pilot_mode_t s_mode = PILOT_MODE_DC_LOW;
-    return (raw * ADC121_VREF_MV) / ADC121_MAX;
+static uint32_t     last_pwm_duty = 0;
+static bool         s_internal_adc_configured = false;
+
+// ---------------------
+// Helpers internos
+// ---------------------
+static int adc121_raw_to_mv(uint16_t raw)
+{
+    return (int)((raw * ADC121_VREF_MV) / ADC121_MAX);
 }
 
-void pilot_init(void)
+static int compare_int(const void *a, const void *b)
 {
-    ledc_timer_config_t ledc_timer = {
+    int va = *(const int *)a;
-        .speed_mode = PILOT_PWM_SPEED_MODE,
+    int vb = *(const int *)b;
-        .timer_num = PILOT_PWM_TIMER,
+    if (va < vb) return -1;
-        .duty_resolution = PILOT_PWM_DUTY_RES,
+    if (va > vb) return 1;
-        .freq_hz = 1000,
+    return 0;
-        .clk_cfg = LEDC_AUTO_CLK
+}
-    };
-    ESP_ERROR_CHECK(ledc_timer_config(&ledc_timer));
 
-    ledc_channel_config_t ledc_channel = {
+static bool pilot_adc_read_mv(int *mv)
-        .speed_mode = PILOT_PWM_SPEED_MODE,
+{
-        .channel = PILOT_PWM_CHANNEL,
+    if (!mv)
-        .timer_sel = PILOT_PWM_TIMER,
+    {
-        .intr_type = LEDC_INTR_DISABLE,
+        return false;
-        .gpio_num = board_config.pilot_pwm_gpio,
+    }
-        .duty = 0,
-        .hpoint = 0
-    };
-    ESP_ERROR_CHECK(ledc_channel_config(&ledc_channel));
-    ESP_ERROR_CHECK(ledc_stop(PILOT_PWM_SPEED_MODE, PILOT_PWM_CHANNEL, 0));
 
+    if (board_config.pilot_adc_source == BOARD_CONFIG_PILOT_ADC_INTERNAL_ESP32)
+    {
+        if (!adc_handle || !adc_cali_handle)
+        {
+            ESP_LOGE(TAG, "ADC interno não inicializado/calibrado");
+            return false;
+        }
+
+        int raw = 0;
+        esp_err_t err;
+
+        adc_lock();
+        err = adc_oneshot_read(adc_handle, board_config.pilot_adc_channel, &raw);
+        if (err == ESP_OK)
+        {
+            err = adc_cali_raw_to_voltage(adc_cali_handle, raw, mv);
+        }
+        adc_unlock();
+
+        if (err != ESP_OK)
+        {
+            ESP_LOGE(TAG, "Erro ao ler/converter ADC interno do pilot: %s", esp_err_to_name(err));
+            return false;
+        }
+
+        return true;
+    }
+
+    uint16_t raw = 0;
+    if (!adc121s021_dma_get_sample(&raw))
+    {
+        return false;
+    }
+
+    *mv = adc121_raw_to_mv(raw);
+    return true;
+}
+
+static void pilot_adc_init(void)
+{
+    if (board_config.pilot_adc_source == BOARD_CONFIG_PILOT_ADC_INTERNAL_ESP32)
+    {
+        if (!adc_handle)
+        {
+            adc_init();
+        }
+
+        if (!s_internal_adc_configured)
+        {
+            adc_oneshot_chan_cfg_t config = {
+                .bitwidth = ADC_BITWIDTH_DEFAULT,
+                .atten = ADC_ATTEN_DB_12
+            };
+            ESP_ERROR_CHECK(adc_oneshot_config_channel(adc_handle,
+                                                       board_config.pilot_adc_channel,
+                                                       &config));
+            s_internal_adc_configured = true;
+        }
+
+        ESP_LOGI(TAG, "Pilot ADC: interno ESP32 ADC1_CH%d",
+                 (int)board_config.pilot_adc_channel);
+        return;
+    }
+
+    ESP_LOGI(TAG, "Pilot ADC: ADC121S021 externo via SPI");
     adc121s021_dma_init();
 }
 
-void pilot_set_level(bool level)
+// ---------------------
+// Inicialização PWM + ADC
+// ---------------------
+void pilot_init(void)
 {
-    if (last_pilot_level == level) return;
+    // Configura timer do PWM do Pilot (1 kHz)
-    last_pilot_level = level;
+    ledc_timer_config_t ledc_timer = {
+        .speed_mode       = PILOT_PWM_SPEED_MODE,
+        .timer_num        = PILOT_PWM_TIMER,
+        .duty_resolution  = PILOT_PWM_DUTY_RES,
+        .freq_hz          = 1000, // 1 kHz (IEC 61851)
+        .clk_cfg          = LEDC_AUTO_CLK
+    };
+    ESP_ERROR_CHECK(ledc_timer_config(&ledc_timer));
 
-    ESP_LOGI(TAG, "Set level %d", level);
+    // Canal do PWM no pino configurado em board_config
-    ledc_stop(PILOT_PWM_SPEED_MODE, PILOT_PWM_CHANNEL, level ? 1 : 0);
+    ledc_channel_config_t ledc_channel = {
+        .speed_mode = PILOT_PWM_SPEED_MODE,
+        .channel    = PILOT_PWM_CHANNEL,
+        .timer_sel  = PILOT_PWM_TIMER,
+        .intr_type  = LEDC_INTR_DISABLE,
+        .gpio_num   = board_config.pilot_pwm_gpio,
+        .duty       = 0,
+        .hpoint     = 0
+    };
+    ESP_ERROR_CHECK(ledc_channel_config(&ledc_channel));
+
+    // Garante que começa parado e em idle baixo (pilot off)
+    ESP_ERROR_CHECK(ledc_stop(PILOT_PWM_SPEED_MODE, PILOT_PWM_CHANNEL, 0));
+    s_mode = PILOT_MODE_DC_LOW;
+    last_pwm_duty = 0;
+
+    // Inicializa o backend de leitura do pilot configurado na board.
+    pilot_adc_init();
+}
+
+// ---------------------
+// Controlo do modo do Pilot
+// ---------------------
+void pilot_set_level(bool high)
+{
+    pilot_mode_t target = high ? PILOT_MODE_DC_HIGH : PILOT_MODE_DC_LOW;
+
+    // Se já estiver no modo DC desejado e sem PWM ativo, ignora
+    if (s_mode == target && last_pwm_duty == 0) {
+        return;
+    }
+
+    ESP_LOGI(TAG, "Pilot set DC level: %s", high ? "HIGH(+12V)" : "LOW/OFF");
+
+    // Para PWM e fixa o nível idle do GPIO
+    ESP_ERROR_CHECK(ledc_stop(PILOT_PWM_SPEED_MODE, PILOT_PWM_CHANNEL, high ? 1 : 0));
+
+    s_mode = target;
     last_pwm_duty = 0;
 }
 
 void pilot_set_amps(uint16_t amps)
 {
-    if (amps < 6 || amps > 80) {
+    if (amps < 6 || amps > 80)
+    {
         ESP_LOGE(TAG, "Invalid ampere value: %d A (valid: 6–80 A)", amps);
         return;
     }
 
     uint32_t duty_percent;
-    if (amps <= 51) {
+    if (amps <= 51)
+    {
         duty_percent = (amps * 10) / 6;
-    } else {
+    }
+    else
+    {
         duty_percent = (amps * 10) / 25 + 64;
     }
     if (duty_percent > 100) duty_percent = 100;
 
     uint32_t duty = (PILOT_PWM_MAX_DUTY * duty_percent) / 100;
 
-    if (last_pilot_level == 0 && last_pwm_duty == duty) return;
+    // Se já estiver em PWM com o mesmo duty, ignora
-    last_pilot_level = 0;
+    if (s_mode == PILOT_MODE_PWM && last_pwm_duty == duty) {
+        return;
+    }
+
+    s_mode = PILOT_MODE_PWM;
     last_pwm_duty = duty;
 
-    ESP_LOGI(TAG, "Pilot set: %d A → %d/%d (≈ %d%% duty)",
+    ESP_LOGI(TAG, "Pilot set PWM: %d A → %d/%d (≈ %d%% duty)",
              amps, (int)duty, PILOT_PWM_MAX_DUTY, (int)duty_percent);
 
-    ledc_set_duty(PILOT_PWM_SPEED_MODE, PILOT_PWM_CHANNEL, duty);
+    ESP_ERROR_CHECK(ledc_set_duty(PILOT_PWM_SPEED_MODE, PILOT_PWM_CHANNEL, duty));
-    ledc_update_duty(PILOT_PWM_SPEED_MODE, PILOT_PWM_CHANNEL);
+    ESP_ERROR_CHECK(ledc_update_duty(PILOT_PWM_SPEED_MODE, PILOT_PWM_CHANNEL));
 }
 
-bool pilot_get_state(void) {
+bool pilot_get_state(void)
-    return (last_pilot_level == 1) && (last_pwm_duty == 0);
+{
-}
+    // "Alto" significa DC +12V (estado A). PWM não conta como DC high.
-
+    return (s_mode == PILOT_MODE_DC_HIGH);
-static int compare_int(const void *a, const void *b) {
-    return (*(const int *)a - *(const int *)b);
 }
 
+// ---------------------
+// Medição do sinal de Pilot (PWM 1 kHz J1772)
+// ---------------------
 void pilot_measure(pilot_voltage_t *up_voltage, bool *down_voltage_n12)
 {
     ESP_LOGD(TAG, "pilot_measure");
 
-    int samples[NUM_PILOT_SAMPLES];
+    int samples_mv[NUM_PILOT_SAMPLES];
-    int collected = 0, attempts = 0;
+    int collected = 0;
-    uint16_t adc_sample = 0;
+    int attempts  = 0;
 
-    while (collected < NUM_PILOT_SAMPLES && attempts < MAX_SAMPLE_ATTEMPTS) {
+    while (collected < NUM_PILOT_SAMPLES && attempts < MAX_SAMPLE_ATTEMPTS)
-        adc_sample = 0;
+    {
-        if (adc121s021_dma_get_sample(&adc_sample)) {
+        int sample_mv = 0;
-            samples[collected++] = adc_sample;
+
-            esp_rom_delay_us(10);
+        if (pilot_adc_read_mv(&sample_mv))
-        } else {
+        {
+            samples_mv[collected++] = sample_mv;
+            esp_rom_delay_us(PILOT_SAMPLE_DELAY_US);
+        }
+        else
+        {
             esp_rom_delay_us(100);
             attempts++;
         }
     }
 
-    if (collected < NUM_PILOT_SAMPLES) {
+    if (collected < NUM_PILOT_SAMPLES)
+    {
         ESP_LOGW(TAG, "Timeout on sample read (%d/%d)", collected, NUM_PILOT_SAMPLES);
         *up_voltage = PILOT_VOLTAGE_1;
         *down_voltage_n12 = false;
         return;
     }
 
-    qsort(samples, collected, sizeof(int), compare_int);
+    // Ordena as amostras para eliminar extremos (ruído/espúrios)
+    qsort(samples_mv, collected, sizeof(int), compare_int);
 
     int k = (collected * PILOT_EXTREME_PERCENT) / 100;
-    if (k == 0) k = 1;
+    if (k < 2) k = 2; // garante margem mínima
 
+    // descarta k/2 em cada lado (aprox. 10% total, mantendo simetria)
     int low_index  = k / 2;
-    int high_index = collected - k + (k / 2);
+    int high_index = collected - 1 - (k / 2);
+
+    if (low_index < 0) low_index = 0;
     if (high_index >= collected) high_index = collected - 1;
+    if (high_index <= low_index) high_index = low_index;
 
-    int low_raw  = samples[low_index];
+    int low_mv  = samples_mv[low_index];
-    int high_raw = samples[high_index];
+    int high_mv = samples_mv[high_index];
-
-    int high_mv = adc_raw_to_mv(high_raw);
-    int low_mv  = adc_raw_to_mv(low_raw);
 
+    // Determina o nível positivo (+12, +9, +6, +3 ou <3 V)
     if (high_mv >= board_config.pilot_down_threshold_12)
+    {
         *up_voltage = PILOT_VOLTAGE_12;
+    }
     else if (high_mv >= board_config.pilot_down_threshold_9)
+    {
         *up_voltage = PILOT_VOLTAGE_9;
+    }
     else if (high_mv >= board_config.pilot_down_threshold_6)
+    {
         *up_voltage = PILOT_VOLTAGE_6;
+    }
     else if (high_mv >= board_config.pilot_down_threshold_3)
+    {
         *up_voltage = PILOT_VOLTAGE_3;
+    }
     else
+    {
         *up_voltage = PILOT_VOLTAGE_1;
+    }
 
+    // Verifica se o nível negativo atinge -12 V (diodo presente, C/D válidos)
     *down_voltage_n12 = (low_mv <= board_config.pilot_down_threshold_n12);
 
-    ESP_LOGD(TAG, "Final: up_voltage=%d, down_voltage_n12=%d", *up_voltage, *down_voltage_n12);
+    ESP_LOGD(TAG, "Final: up_voltage=%d, down_voltage_n12=%d (high=%d mV, low=%d mV)",
+             *up_voltage, *down_voltage_n12, high_mv, low_mv);
 }

components/evse/evse_session.c

@@ -1,4 +1,5 @@
 #include <inttypes.h>
+#include <string.h>
 #include "evse_session.h"
 #include "evse_meter.h"
 #include "freertos/FreeRTOS.h"
@@ -7,82 +8,157 @@
 #include "evse_events.h"
 #include "esp_event.h"
 #include "evse_limits.h"
+#include "esp_timer.h"
+
+#define EVSE_EVENT_POST_TIMEOUT_MS 50
 
 static const char *TAG = "evse_session";
 
 static TickType_t session_start_tick = 0;
-static uint32_t watt_seconds = 0;
+
+// Tempo real (microsegundos)
+static int64_t session_start_us = 0;
+static int64_t last_tick_us = 0;
+
+// Energia integrada com tempo real: soma de (W * us)
+static uint64_t watt_microseconds = 0;
+
 static evse_session_t last_session;
 static bool last_session_valid = false;
 static uint32_t session_counter = 0;
+static char authorized_tag[AUTH_TAG_MAX_LEN];
+static char current_session_tag[AUTH_TAG_MAX_LEN];
 
 static portMUX_TYPE session_mux = portMUX_INITIALIZER_UNLOCKED;
 
+static void post_session_event(const evse_session_event_data_t *evt)
+{
+    esp_err_t err = esp_event_post(
+        EVSE_EVENTS,
+        EVSE_EVENT_SESSION,
+        evt,
+        sizeof(*evt),
+        portMAX_DELAY);
+
+    if (err != ESP_OK)
+    {
+        ESP_LOGW(TAG, "esp_event_post(EVSE_EVENT_SESSION) failed: %s", esp_err_to_name(err));
+    }
+}
+
 void evse_session_init(void)
 {
     portENTER_CRITICAL(&session_mux);
     session_start_tick = 0;
-    watt_seconds = 0;
+    session_start_us = 0;
+    last_tick_us = 0;
+    watt_microseconds = 0;
     last_session_valid = false;
     session_counter = 0;
+    authorized_tag[0] = '\0';
+    current_session_tag[0] = '\0';
     portEXIT_CRITICAL(&session_mux);
 }
 
+void evse_session_set_authorized_tag(const char *tag)
+{
+    portENTER_CRITICAL(&session_mux);
+    if (tag && tag[0] != '\0')
+    {
+        strncpy(authorized_tag, tag, AUTH_TAG_MAX_LEN - 1);
+        authorized_tag[AUTH_TAG_MAX_LEN - 1] = '\0';
+    }
+    else
+    {
+        authorized_tag[0] = '\0';
+    }
+    portEXIT_CRITICAL(&session_mux);
+}
+
+void evse_session_clear_authorized_tag(void)
+{
+    evse_session_set_authorized_tag(NULL);
+}
+
 void evse_session_start(void)
 {
     TickType_t tick = xTaskGetTickCount();
+    int64_t now_us = esp_timer_get_time();
 
     portENTER_CRITICAL(&session_mux);
     session_start_tick = tick;
-    watt_seconds = 0;
+    session_start_us = now_us;
+    last_tick_us = now_us;
+    watt_microseconds = 0;
     session_counter++;
+    uint32_t id = session_counter;
+    strncpy(current_session_tag, authorized_tag, AUTH_TAG_MAX_LEN - 1);
+    current_session_tag[AUTH_TAG_MAX_LEN - 1] = '\0';
+    char tag[AUTH_TAG_MAX_LEN];
+    strncpy(tag, current_session_tag, AUTH_TAG_MAX_LEN - 1);
+    tag[AUTH_TAG_MAX_LEN - 1] = '\0';
     portEXIT_CRITICAL(&session_mux);
 
     evse_set_limit_reached(false);
 
-    ESP_LOGI(TAG, "Session started at tick %u", (unsigned)tick);
+    ESP_LOGI(TAG, "Session started (id=%" PRIu32 ", tag=%s) tick=%u us=%" PRId64,
+             id, tag[0] ? tag : "-", (unsigned)tick, now_us);
 
     evse_session_event_data_t evt = {
         .type = EVSE_SESSION_EVENT_STARTED,
-        .session_id = session_counter,
+        .session_id = id,
         .duration_s = 0,
         .energy_wh = 0,
         .avg_power_w = 0,
         .is_current = true,
     };
-
+    strncpy(evt.tag, tag, AUTH_TAG_MAX_LEN - 1);
-    esp_event_post(EVSE_EVENTS,
+    evt.tag[AUTH_TAG_MAX_LEN - 1] = '\0';
-                   EVSE_EVENT_SESSION,
+    post_session_event(&evt);
-                   &evt,
-                   sizeof(evt),
-                   portMAX_DELAY);
 }
 
 void evse_session_end(void)
 {
     TickType_t start_tick;
-    uint32_t ws;
+    int64_t start_us;
+    uint64_t w_us;
     uint32_t id;
+    char tag[AUTH_TAG_MAX_LEN];
+
+    int64_t end_us = esp_timer_get_time();
 
     portENTER_CRITICAL(&session_mux);
-    if (session_start_tick == 0) {
+    if (session_start_tick == 0)
+    {
         portEXIT_CRITICAL(&session_mux);
         ESP_LOGW(TAG, "evse_session_end called without active session");
         return;
     }
+
     start_tick = session_start_tick;
-    ws = watt_seconds;
+    start_us = session_start_us;
+    w_us = watt_microseconds;
     id = session_counter;
+    strncpy(tag, current_session_tag, AUTH_TAG_MAX_LEN - 1);
+    tag[AUTH_TAG_MAX_LEN - 1] = '\0';
+
     session_start_tick = 0;
+    session_start_us = 0;
+    last_tick_us = 0;
+    watt_microseconds = 0;
+    current_session_tag[0] = '\0';
     portEXIT_CRITICAL(&session_mux);
 
-    TickType_t now = xTaskGetTickCount();
+    uint32_t duration_s = (end_us > start_us) ? (uint32_t)((end_us - start_us) / 1000000LL) : 0;
-    uint32_t duration_s = (now - start_tick) / configTICK_RATE_HZ;
+    uint32_t energy_wh = (uint32_t)(w_us / (3600ULL * 1000000ULL));
-    uint32_t energy_wh = ws / 3600U;
+    uint64_t watt_seconds = (uint64_t)(w_us / 1000000ULL);
-    uint32_t avg_power = duration_s > 0 ? ws / duration_s : 0;
+    uint32_t avg_power = (duration_s > 0) ? (uint32_t)(watt_seconds / duration_s) : 0;
 
     portENTER_CRITICAL(&session_mux);
     last_session.start_tick = start_tick;
+    last_session.session_id = id;
+    strncpy(last_session.tag, tag, AUTH_TAG_MAX_LEN - 1);
+    last_session.tag[AUTH_TAG_MAX_LEN - 1] = '\0';
     last_session.duration_s = duration_s;
     last_session.energy_wh = energy_wh;
     last_session.avg_power_w = avg_power;
@@ -91,9 +167,9 @@ void evse_session_end(void)
     portEXIT_CRITICAL(&session_mux);
 
     ESP_LOGI(TAG,
-             "Session ended: duration=%" PRIu32 " s, energy=%" PRIu32
+             "Session ended (id=%" PRIu32 "): duration=%" PRIu32 " s, energy=%" PRIu32
-             " Wh, avg_power=%" PRIu32 " W",
+             " Wh, avg_power=%" PRIu32 " W, tag=%s",
-             duration_s, energy_wh, avg_power);
+             id, duration_s, energy_wh, avg_power, tag[0] ? tag : "-");
 
     evse_session_event_data_t evt = {
         .type = EVSE_SESSION_EVENT_FINISHED,
@@ -103,21 +179,38 @@ void evse_session_end(void)
         .avg_power_w = avg_power,
         .is_current = false,
     };
-
+    strncpy(evt.tag, tag, AUTH_TAG_MAX_LEN - 1);
-    esp_event_post(EVSE_EVENTS,
+    evt.tag[AUTH_TAG_MAX_LEN - 1] = '\0';
-                   EVSE_EVENT_SESSION,
+    post_session_event(&evt);
-                   &evt,
-                   sizeof(evt),
-                   portMAX_DELAY);
 }
 
 void evse_session_tick(void)
 {
-    uint32_t power_w = evse_meter_get_instant_power();
+    // Potência instantânea pode ser negativa (ruído/overflow de sensor) -> clamp
+    int p = evse_meter_get_instant_power();
+    uint32_t power_w = (p > 0) ? (uint32_t)p : 0;
+
+    int64_t now_us = esp_timer_get_time();
 
     portENTER_CRITICAL(&session_mux);
-    if (session_start_tick != 0) {
+    if (session_start_tick != 0)
-        watt_seconds += power_w;
+    {
+        if (last_tick_us == 0)
+        {
+            last_tick_us = now_us;
+        }
+        int64_t dt_us = now_us - last_tick_us;
+        if (dt_us > 0)
+        {
+            // Energia incremental: W * us (64-bit)
+            watt_microseconds += ((uint64_t)power_w * (uint64_t)dt_us);
+            last_tick_us = now_us;
+        }
+        else
+        {
+            // relógio não devia andar para trás; ignora
+            last_tick_us = now_us;
+        }
     }
     portEXIT_CRITICAL(&session_mux);
 }
@@ -127,28 +220,40 @@ bool evse_session_get(evse_session_t *out)
     if (out == NULL)
         return false;
 
-    TickType_t start;
+    TickType_t start_tick;
-    uint32_t ws;
+    int64_t start_us;
+    uint64_t w_us;
     bool has_current;
     evse_session_t last_copy;
     bool last_valid;
+    uint32_t id;
+    char tag[AUTH_TAG_MAX_LEN];
+
+    int64_t now_us = esp_timer_get_time();
 
     portENTER_CRITICAL(&session_mux);
-    start = session_start_tick;
+    start_tick = session_start_tick;
-    ws = watt_seconds;
+    start_us = session_start_us;
+    w_us = watt_microseconds;
     has_current = (session_start_tick != 0);
+    id = session_counter;
+    strncpy(tag, current_session_tag, AUTH_TAG_MAX_LEN - 1);
+    tag[AUTH_TAG_MAX_LEN - 1] = '\0';
     last_copy = last_session;
     last_valid = last_session_valid;
     portEXIT_CRITICAL(&session_mux);
 
     if (has_current)
     {
-        TickType_t now = xTaskGetTickCount();
+        uint32_t duration_s = (now_us > start_us) ? (uint32_t)((now_us - start_us) / 1000000LL) : 0;
-        uint32_t duration_s = (now - start) / configTICK_RATE_HZ;
+        uint32_t energy_wh = (uint32_t)(w_us / (3600ULL * 1000000ULL));
-        uint32_t energy_wh = ws / 3600U;
+        uint64_t watt_seconds = (uint64_t)(w_us / 1000000ULL);
-        uint32_t avg_power = duration_s > 0 ? ws / duration_s : 0;
+        uint32_t avg_power = (duration_s > 0) ? (uint32_t)(watt_seconds / duration_s) : 0;
 
-        out->start_tick = start;
+        out->start_tick = start_tick;
+        out->session_id = id;
+        strncpy(out->tag, tag, AUTH_TAG_MAX_LEN - 1);
+        out->tag[AUTH_TAG_MAX_LEN - 1] = '\0';
         out->duration_s = duration_s;
         out->energy_wh = energy_wh;
         out->avg_power_w = avg_power;

components/evse/evse_state.c

@@ -5,150 +5,203 @@
 #include "freertos/FreeRTOS.h"
 #include "freertos/portmacro.h"
 #include "esp_log.h"
+#include "esp_event.h"
 
-// =========================
+#define EVSE_EVENT_POST_TIMEOUT_MS 50
-// Internal State Variables
-// =========================
 
 static evse_state_t current_state = EVSE_STATE_A;
 static bool is_authorized = false;
 
 static portMUX_TYPE state_mux = portMUX_INITIALIZER_UNLOCKED;
-
 static const char *TAG = "evse_state";
 
-// =========================
+static evse_state_event_t map_state_to_event(evse_state_t s)
-// Internal Mapping
+{
-// =========================
+    switch (s)
+    {
+    case EVSE_STATE_A:
+        return EVSE_STATE_EVENT_IDLE;
 
-static evse_state_event_t map_state_to_event(evse_state_t s) {
+    case EVSE_STATE_B1:
-    switch (s) {
+    case EVSE_STATE_B2:
-        case EVSE_STATE_A:  return EVSE_STATE_EVENT_IDLE;
+        return EVSE_STATE_EVENT_WAITING;
-        case EVSE_STATE_B1:
+
-        case EVSE_STATE_B2: return EVSE_STATE_EVENT_WAITING;
+    case EVSE_STATE_C1:
-        case EVSE_STATE_C1:
+    case EVSE_STATE_C2:
-        case EVSE_STATE_C2: return EVSE_STATE_EVENT_CHARGING;
+    case EVSE_STATE_D1:
-        case EVSE_STATE_E:
+    case EVSE_STATE_D2:
-        case EVSE_STATE_F:  return EVSE_STATE_EVENT_FAULT;
+        return EVSE_STATE_EVENT_CHARGING;
-        default:            return EVSE_STATE_EVENT_IDLE;
+
+    case EVSE_STATE_E:
+    case EVSE_STATE_F:
+        return EVSE_STATE_EVENT_FAULT;
+
+    default:
+        return EVSE_STATE_EVENT_IDLE;
     }
 }
 
-// =========================
+static void post_evse_event(evse_event_id_t id, const void *data, size_t len)
-// Public API
+{
-// =========================
+    esp_err_t err = esp_event_post(
+        EVSE_EVENTS,
+        id,
+        data,
+        len,
+        portMAX_DELAY);
 
-void evse_set_state(evse_state_t new_state) {
+    if (err != ESP_OK)
+    {
+        ESP_LOGW(TAG, "esp_event_post(id=%d) failed: %s", (int)id, esp_err_to_name(err));
+    }
+}
+
+bool evse_state_is_charging(evse_state_t state)
+{
+    // “charging” == energia efetiva (relé ON)
+    return (state == EVSE_STATE_C2 || state == EVSE_STATE_D2);
+}
+
+bool evse_state_is_power_flowing(evse_state_t state)
+{
+    return evse_state_is_charging(state);
+}
+
+bool evse_state_is_requesting(evse_state_t state)
+{
+    // EV pediu carga mas o relé ainda está OFF
+    return (state == EVSE_STATE_C1 || state == EVSE_STATE_D1);
+}
+
+bool evse_state_is_plugged(evse_state_t state)
+{
+    return state == EVSE_STATE_B1 || state == EVSE_STATE_B2 ||
+           state == EVSE_STATE_C1 || state == EVSE_STATE_C2 ||
+           state == EVSE_STATE_D1 || state == EVSE_STATE_D2;
+}
+
+bool evse_state_is_session(evse_state_t state)
+{
+    // Sessão lógica: “autorizado/pronto” ou “a pedir/a fornecer energia”
+    return (state == EVSE_STATE_B2 ||
+            state == EVSE_STATE_C1 || state == EVSE_STATE_C2 ||
+            state == EVSE_STATE_D1 || state == EVSE_STATE_D2);
+}
+
+void evse_set_state(evse_state_t new_state)
+{
     bool changed = false;
     evse_state_t prev_state;
     bool start_session = false;
-    bool end_session   = false;
+    bool end_session = false;
 
-    // 1) Detecta transição de estado dentro da região crítica
     portENTER_CRITICAL(&state_mux);
-      prev_state = current_state;
+    prev_state = current_state;
-      if (new_state != current_state) {
+
-          // se entrou em charging pela primeira vez
+    if (new_state != current_state)
-          if (evse_state_is_charging(new_state) && !evse_state_is_charging(prev_state)) {
+    {
-              start_session = true;
+
-          }
+        // Sessão começa quando entra em energia (relé ON)
-          // se saiu de charging para qualquer outro
+        if (evse_state_is_power_flowing(new_state) && !evse_state_is_power_flowing(prev_state))
-          else if (!evse_state_is_charging(new_state) && evse_state_is_charging(prev_state)) {
+        {
-              end_session = true;
+            start_session = true;
-          }
+        }
-          current_state = new_state;
+        // Sessão termina quando sai de energia
-          changed = true;
+        else if (!evse_state_is_power_flowing(new_state) && evse_state_is_power_flowing(prev_state))
-      }
+        {
+            end_session = true;
+        }
+
+        current_state = new_state;
+        changed = true;
+    }
     portEXIT_CRITICAL(&state_mux);
 
-    // 2) Executa start/end de sessão FORA da região crítica, evitando logs/alloc dentro dela
+    // Fora da região crítica
-    if (start_session) {
+    if (start_session)
+    {
         evse_session_start();
     }
-    if (end_session) {
+    if (end_session)
+    {
         evse_session_end();
     }
 
-    // 3) Se mudou o estado, faz log e dispara evento
+    if (changed)
-    if (changed) {
+    {
-        const char *prev_str = evse_state_to_str(prev_state);
+        ESP_LOGI(TAG, "State changed: %s → %s",
-        const char *curr_str = evse_state_to_str(new_state);
+                 evse_state_to_str(prev_state),
-        ESP_LOGI(TAG, "State changed: %s → %s", prev_str, curr_str);
+                 evse_state_to_str(new_state));
 
         evse_state_event_data_t evt = {
-            .state = map_state_to_event(new_state)
+            .state = map_state_to_event(new_state)};
-        };
+        post_evse_event(EVSE_EVENT_STATE_CHANGED, &evt, sizeof(evt));
-        esp_event_post(EVSE_EVENTS,
-                       EVSE_EVENT_STATE_CHANGED,
-                       &evt,
-                       sizeof(evt),
-                       portMAX_DELAY);
     }
 }
 
-
+evse_state_t evse_get_state(void)
-
+{
-evse_state_t evse_get_state(void) {
     portENTER_CRITICAL(&state_mux);
     evse_state_t s = current_state;
     portEXIT_CRITICAL(&state_mux);
     return s;
 }
 
-const char* evse_state_to_str(evse_state_t state) {
+const char *evse_state_to_str(evse_state_t state)
-    switch (state) {
+{
-        case EVSE_STATE_A:  return "A - EV Not Connected (12V)";
+    switch (state)
-        case EVSE_STATE_B1: return "B1 - EV Connected (9V, Not Authorized)";
+    {
-        case EVSE_STATE_B2: return "B2 - EV Connected (9V, Authorized and Ready)";
+    case EVSE_STATE_A:
-        case EVSE_STATE_C1: return "C1 - Charging Requested (6V, Relay Off)";
+        return "A - EV Not Connected (12V)";
-        case EVSE_STATE_C2: return "C2 - Charging Active (6V, Relay On)";
+    case EVSE_STATE_B1:
-        case EVSE_STATE_D1: return "D1 - Ventilation Required (3V, Relay Off)";
+        return "B1 - EV Connected (9V, Not Authorized)";
-        case EVSE_STATE_D2: return "D2 - Ventilation Active (3V, Relay On)";
+    case EVSE_STATE_B2:
-        case EVSE_STATE_E:  return "E - Error: Control Pilot Shorted to Ground (0V)";
+        return "B2 - EV Connected (9V, Authorized and Ready)";
-        case EVSE_STATE_F:  return "F - Fault: EVSE Unavailable or No Pilot Signal";
+    case EVSE_STATE_C1:
-        default:            return "Unknown State";
+        return "C1 - Charging Requested (6V, Relay Off)";
+    case EVSE_STATE_C2:
+        return "C2 - Charging Active (6V, Relay On)";
+    case EVSE_STATE_D1:
+        return "D1 - Ventilation Required (3V, Relay Off)";
+    case EVSE_STATE_D2:
+        return "D2 - Ventilation Active (3V, Relay On)";
+    case EVSE_STATE_E:
+        return "E - Error: Control Pilot Shorted to Ground (0V)";
+    case EVSE_STATE_F:
+        return "F - Fault: EVSE Unavailable or No Pilot Signal";
+    default:
+        return "Unknown State";
     }
 }
 
-void evse_state_init(void) {
+void evse_state_init(void)
+{
     portENTER_CRITICAL(&state_mux);
     current_state = EVSE_STATE_A;
-    is_authorized = true;
+    is_authorized = false;
     portEXIT_CRITICAL(&state_mux);
 
-    ESP_LOGI("EVSE_STATE", "Initialized in state: %s", evse_state_to_str(current_state));
+    ESP_LOGI(TAG, "Initialized in state: %s", evse_state_to_str(current_state));
 
     evse_state_event_data_t evt = {
-        .state = map_state_to_event(current_state)
+        .state = map_state_to_event(current_state)};
-    };
+    post_evse_event(EVSE_EVENT_INIT, &evt, sizeof(evt));
-    esp_event_post(EVSE_EVENTS, EVSE_EVENT_INIT, &evt, sizeof(evt), portMAX_DELAY);
 }
 
-void evse_state_tick(void) {
+void evse_state_tick(void)
-    // Placeholder for future state logic
+{
+    // placeholder
 }
 
-bool evse_state_is_charging(evse_state_t state) {
+void evse_state_set_authorized(bool authorized)
-    return state == EVSE_STATE_C1 || state == EVSE_STATE_C2;
+{
-}
-
-bool evse_state_is_plugged(evse_state_t state) {
-    return state == EVSE_STATE_B1 || state == EVSE_STATE_B2 ||
-           state == EVSE_STATE_C1 || state == EVSE_STATE_C2 ||
-           state == EVSE_STATE_D1 || state == EVSE_STATE_D2;
-}
-
-bool evse_state_is_session(evse_state_t state) {
-    return state == EVSE_STATE_B2 || state == EVSE_STATE_C1 || state == EVSE_STATE_C2;
-}
-
-void evse_state_set_authorized(bool authorized) {
     portENTER_CRITICAL(&state_mux);
     is_authorized = authorized;
     portEXIT_CRITICAL(&state_mux);
 }
 
-bool evse_state_get_authorized(void) {
+bool evse_state_get_authorized(void)
+{
     portENTER_CRITICAL(&state_mux);
     bool result = is_authorized;
     portEXIT_CRITICAL(&state_mux);

components/evse/include/evse_config.h

@@ -15,11 +15,9 @@ extern "C" {
 // Limites Globais (Defines)
 // ========================
 
-// Corrente máxima de carregamento (configurável pelo usuário)
 #define MIN_CHARGING_CURRENT_LIMIT        6    // A
 #define MAX_CHARGING_CURRENT_LIMIT        32   // A
 
-// Corrente via cabo (proximity) — se configurável
 #define MIN_CABLE_CURRENT_LIMIT           6    // A
 #define MAX_CABLE_CURRENT_LIMIT           63   // A
 
@@ -31,23 +29,20 @@ extern "C" {
 esp_err_t evse_config_init(void);
 void evse_check_defaults(void);
 
-// Corrente de carregamento
+// Corrente máxima de hardware (fixa)
 uint8_t  evse_get_max_charging_current(void);
-esp_err_t evse_set_max_charging_current(uint8_t value);
 
+// Corrente configurável (persistida) <= max hardware
 uint16_t evse_get_charging_current(void);
 esp_err_t evse_set_charging_current(uint16_t value);
 
-uint16_t evse_get_default_charging_current(void);
+// Corrente runtime (RAM) <= max hardware (load balancer pode alterar)
-esp_err_t evse_set_default_charging_current(uint16_t value);
-
-// Configuração de socket outlet
-bool     evse_get_socket_outlet(void);
-esp_err_t evse_set_socket_outlet(bool socket_outlet);
-
 void     evse_set_runtime_charging_current(uint16_t value);
 uint16_t evse_get_runtime_charging_current(void);
 
+// Socket outlet
+bool     evse_get_socket_outlet(void);
+esp_err_t evse_set_socket_outlet(bool socket_outlet);
 
 // RCM
 bool     evse_is_rcm(void);

components/evse/include/evse_error.h

@@ -1,4 +1,3 @@
-// === Início de: components/evse/include/evse_error.h ===
 #ifndef EVSE_ERROR_H
 #define EVSE_ERROR_H
 
@@ -6,21 +5,23 @@
 #include <stdbool.h>
 #include "evse_pilot.h"
 
-// Bits que auto-limpam passado um timeout
+// ----------------------------------------------------
-#define EVSE_ERR_AUTO_CLEAR_BITS (  \
+// Holdoff interno pós-erro (sem expor "cooldown" ao resto)
-    EVSE_ERR_DIODE_SHORT_BIT |      \
+// ----------------------------------------------------
-    EVSE_ERR_TEMPERATURE_HIGH_BIT | \
+// Após TODOS os erros reais desaparecerem (raw_bits == 0),
-    EVSE_ERR_RCM_TRIGGERED_BIT)
+// o módulo mantém o erro "visível" durante este tempo.
+// Durante este período, evse_get_error() continua != 0.
+#define EVSE_ERROR_COOLDOWN_MS 60000
 
 // Error bits
-#define EVSE_ERR_DIODE_SHORT_BIT           (1 << 0)
+#define EVSE_ERR_DIODE_SHORT_BIT        (1 << 0)
-#define EVSE_ERR_LOCK_FAULT_BIT            (1 << 1)
+#define EVSE_ERR_LOCK_FAULT_BIT         (1 << 1)
-#define EVSE_ERR_UNLOCK_FAULT_BIT          (1 << 2)
+#define EVSE_ERR_UNLOCK_FAULT_BIT       (1 << 2)
-#define EVSE_ERR_RCM_SELFTEST_FAULT_BIT    (1 << 3)
+#define EVSE_ERR_RCM_SELFTEST_FAULT_BIT (1 << 3)
-#define EVSE_ERR_RCM_TRIGGERED_BIT         (1 << 4)
+#define EVSE_ERR_RCM_TRIGGERED_BIT      (1 << 4)
-#define EVSE_ERR_TEMPERATURE_HIGH_BIT      (1 << 5)
+#define EVSE_ERR_TEMPERATURE_HIGH_BIT   (1 << 5)
-#define EVSE_ERR_PILOT_FAULT_BIT           (1 << 6)
+#define EVSE_ERR_PILOT_FAULT_BIT        (1 << 6)
-#define EVSE_ERR_TEMPERATURE_FAULT_BIT     (1 << 7)
+#define EVSE_ERR_TEMPERATURE_FAULT_BIT  (1 << 7)
 
 // Inicialização do módulo de erros
 void evse_error_init(void);
@@ -30,7 +31,7 @@ void evse_error_check(pilot_voltage_t pilot_voltage, bool is_n12v);
 void evse_temperature_check(void);
 void evse_error_tick(void);
 
-// Leitura e controle de erros
+// Leitura e controle de erros (estado "visível" com holdoff)
 uint32_t evse_get_error(void);
 void evse_error_set(uint32_t bitmask);
 void evse_error_clear(uint32_t bitmask);
@@ -40,12 +41,9 @@ uint32_t evse_error_get_bits(void);
 
 // ----------------------------------------------------
 // Semântica sticky: flag "todos erros limpos"
+// (fica true quando o erro visível chega a 0; pode ser útil para UI/logs)
 // ----------------------------------------------------
-// Fica true quando TODOS os erros são limpos.
-// Volta a false assim que qualquer erro novo aparece.
-// Permanece true até o consumidor limpar explicitamente.
 bool evse_error_cleared_flag(void);
 void evse_error_reset_flag(void);
 
 #endif // EVSE_ERROR_H
-// === Fim de: components/evse/include/evse_error.h ===

components/evse/include/evse_events.h

@@ -6,6 +6,7 @@
 #include <stdbool.h>
 #include <stdint.h>
 #include "esp_event.h"
+#include "auth_types.h"
 
 ESP_EVENT_DECLARE_BASE(EVSE_EVENTS);
 
@@ -16,6 +17,7 @@ typedef enum {
     EVSE_EVENT_ENABLE_UPDATED,
     EVSE_EVENT_AVAILABLE_UPDATED,
     EVSE_EVENT_SESSION,
+    EVSE_EVENT_ERROR_CHANGED, 
 } evse_event_id_t;
 
 // -----------------
@@ -43,35 +45,42 @@ typedef enum {
 typedef struct {
     evse_session_event_type_t type;   ///< STARTED / FINISHED
 
-    // campos básicos da sessão, em tipos simples:
+    uint32_t session_id;
-    uint32_t session_id;              ///< opcional, se tiveres um ID
+    char     tag[AUTH_TAG_MAX_LEN];
-    uint32_t duration_s;              ///< duração em segundos (0 no STARTED)
+    uint32_t duration_s;
-    uint32_t energy_wh;               ///< energia em Wh (0 no STARTED)
+    uint32_t energy_wh;
-    uint32_t avg_power_w;             ///< potência média em W (0 no STARTED)
+    uint32_t avg_power_w;
 
-    bool     is_current;              ///< true se ainda estiver em curso
+    bool     is_current;
 } evse_session_event_data_t;
 
-
 // -----------------
 // Eventos de CONFIG
 // -----------------
 typedef struct {
-    bool    charging;         // Estado de carregamento
+    bool    charging;
-    float   hw_max_current;   // Corrente máxima suportada pelo hardware
+    float   hw_max_current;
-    float   runtime_current;  // Corrente de carregamento em uso
+    float   runtime_current;
-    int64_t timestamp_us;     // Momento da atualização
+    int64_t timestamp_us;
 } evse_config_event_data_t;
 
-// Eventos simples e específicos
 typedef struct {
-    bool    enabled;          // novo estado de enabled
+    bool    enabled;
-    int64_t timestamp_us;     // epoch micros
+    int64_t timestamp_us;
 } evse_enable_event_data_t;
 
 typedef struct {
-    bool    available;        // novo estado de available
+    bool    available;
-    int64_t timestamp_us;     // epoch micros
+    int64_t timestamp_us;
 } evse_available_event_data_t;
 
+// -----------------
+// Eventos de ERRO
+// -----------------
+typedef struct {
+    uint32_t error_bits;    ///< estado atual (todos os bits de erro)
+    uint32_t changed_mask;  ///< bits que mudaram nesta notificação
+    int64_t  timestamp_us;  ///< esp_timer_get_time()
+} evse_error_event_data_t;
+
 #endif // EVSE_EVENTS_H

components/evse/include/evse_pilot.h

@@ -2,65 +2,43 @@
 #define PILOT_H_
 
 #ifdef __cplusplus
-extern "C" {
+extern "C"
+{
 #endif
 
 #include <stdbool.h>
 #include <stdint.h>
 
-/**
+    typedef enum
- * @brief Níveis categóricos de tensão no sinal CP (Control Pilot)
+    {
- */
+        PILOT_VOLTAGE_12,
-typedef enum
+        PILOT_VOLTAGE_9,
-{
+        PILOT_VOLTAGE_6,
-    PILOT_VOLTAGE_12, ///< Estado A: +12V
+        PILOT_VOLTAGE_3,
-    PILOT_VOLTAGE_9,  ///< Estado B: +9V
+        PILOT_VOLTAGE_1
-    PILOT_VOLTAGE_6,  ///< Estado C: +6V
+    } pilot_voltage_t;
-    PILOT_VOLTAGE_3,  ///< Estado D: +3V
-    PILOT_VOLTAGE_1   ///< Estado E/F: abaixo de 3V
-} pilot_voltage_t;
 
-/**
+    void pilot_init(void);
- * @brief Inicializa o driver do sinal Pilot
- */
-void pilot_init(void);
 
-/**
+    /**
- * @brief Define o nível do Pilot: +12V ou -12V
+     * @brief Define o pilot em modo DC.
- *
+     *
- * @param level true = +12V, false = -12V
+     * @param high true = nível alto (+12V)
- */
+     *             false = nível baixo (-12V)
-void pilot_set_level(bool level);
+     */
+    void pilot_set_level(bool high);
 
-/**
+    void pilot_set_amps(uint16_t amps);
- * @brief Ativa o PWM do Pilot com corrente limitada
- *
- * @param amps Corrente em ampères (ex: 16 = 16A)
- */
-void pilot_set_amps(uint16_t amps);
 
-/**
+    void pilot_measure(pilot_voltage_t *up_voltage, bool *down_voltage_n12);
- * @brief Mede o nível de tensão do Pilot e detecta -12V
- *
- * @param up_voltage        Valor categórico da tensão positiva
- * @param down_voltage_n12  true se o nível negativo atingir -12V
- */
-void pilot_measure(pilot_voltage_t *up_voltage, bool *down_voltage_n12);
 
-/**
+    bool pilot_get_state(void);
- * @brief Retorna o estado lógico atual do Pilot (nível alto = +12V)
- *
- * @return true se nível atual for +12V, false se for -12V
- */
-bool pilot_get_state(void);
 
-/**
+    typedef struct
- * @brief Cache interno opcional dos níveis de tensão reais do Pilot
+    {
- */
+        uint16_t high_mv;
-typedef struct {
+        uint16_t low_mv;
-    uint16_t high_mv;  ///< Pico positivo medido (mV)
+    } pilot_voltage_cache_t;
-    uint16_t low_mv;   ///< Pico negativo medido (mV)
-} pilot_voltage_cache_t;
 
 #ifdef __cplusplus
 }

components/evse/include/evse_session.h

@@ -1,53 +1,44 @@
-/*
- * evse_session.h
- * Module to track and retrieve charging session data (current or last completed),
- * accumulating energy via periodic tick of instantaneous power.
- */
-
 #ifndef EVSE_SESSION_H
 #define EVSE_SESSION_H
 
 #include <stdint.h>
 #include <stdbool.h>
 #include "freertos/FreeRTOS.h"
+#include "auth_types.h"
 
 /**
  * @brief Charging session statistics
  */
 typedef struct {
-    TickType_t start_tick;   ///< tick when session began
+    TickType_t start_tick;                  ///< tick when session began (debug/trace)
-    uint32_t    duration_s;  ///< total duration in seconds
+    uint32_t   session_id;                  ///< monotonically increasing session identifier
-    uint32_t    energy_wh;   ///< total energy consumed in Wh
+    char       tag[AUTH_TAG_MAX_LEN];       ///< RFID/auth tag associated with this session, empty if none
-    uint32_t    avg_power_w; ///< average power in W
+    uint32_t   duration_s;                  ///< total duration in seconds (tempo real)
-    bool        is_current;  ///< true if session still in progress
+    uint32_t   energy_wh;                   ///< total energy consumed in Wh (tempo real)
+    uint32_t   avg_power_w;                 ///< average power in W
+    bool       is_current;                  ///< true if session still in progress
 } evse_session_t;
 
-/**
- * @brief Initialize the session module
- */
 void evse_session_init(void);
 
 /**
- * @brief Mark the beginning of a charging session
+ * @brief Stores the tag that authorized the next charging session.
+ *
+ * The tag is copied into the session when evse_session_start() is called.
+ * Passing NULL or an empty string clears the pending tag.
  */
-void evse_session_start(void);
+void evse_session_set_authorized_tag(const char *tag);
+void evse_session_clear_authorized_tag(void);
 
-/**
+void evse_session_start(void);
- * @brief Mark the end of the charging session and store it as "last session"
- */
 void evse_session_end(void);
 
 /**
- * @brief Periodic tick: must be called (e.g., each 1s) to accumulate energy from instant power
+ * @brief Periodic tick: called (e.g., each 1s) to accumulate energy from instant power.
+ * Implementação usa esp_timer (não assume 1s exato).
  */
 void evse_session_tick(void);
 
-/**
- * @brief Retrieve statistics of either the current ongoing session (if any) or
- *        the last completed session.
- * @param out pointer to evse_session_t to be filled
- * @return true if there is a current or last session available, false otherwise
- */
 bool evse_session_get(evse_session_t *out);
 
 #endif // EVSE_SESSION_H

components/evse/include/evse_state.h

@@ -6,90 +6,68 @@
 #include "evse_events.h"
 
 #ifdef __cplusplus
-extern "C" {
+extern "C"
+{
 #endif
 
-// ============================
+    typedef enum
-// EVSE Pilot Signal States
+    {
-// ============================
+        EVSE_STATE_A,  // EV Not Connected (12V)
+        EVSE_STATE_B1, // EV Connected (9V, Not Authorized)
+        EVSE_STATE_B2, // EV Connected (9V, Authorized and Ready)
+        EVSE_STATE_C1, // Charging Requested (6V, Relay Off)
+        EVSE_STATE_C2, // Charging Active (6V, Relay On)
+        EVSE_STATE_D1, // Ventilation Required (3V, Relay Off)
+        EVSE_STATE_D2, // Ventilation Active (3V, Relay On)
+        EVSE_STATE_E,  // Error: Pilot Short to Ground (0V)
+        EVSE_STATE_F   // Fault: No Pilot or EVSE Unavailable
+    } evse_state_t;
 
-typedef enum {
+    // Initialization
-    EVSE_STATE_A,   // EV Not Connected (12V)
+    void evse_state_init(void);
-    EVSE_STATE_B1,  // EV Connected (9V, Not Authorized)
+    void evse_state_tick(void);
-    EVSE_STATE_B2,  // EV Connected (9V, Authorized and Ready)
-    EVSE_STATE_C1,  // Charging Requested (6V, Relay Off)
-    EVSE_STATE_C2,  // Charging Active (6V, Relay On)
-    EVSE_STATE_D1,  // Ventilation Required (3V, Relay Off)
-    EVSE_STATE_D2,  // Ventilation Active (3V, Relay On)
-    EVSE_STATE_E,   // Error: Pilot Short to Ground (0V)
-    EVSE_STATE_F    // Fault: No Pilot or EVSE Unavailable
-} evse_state_t;
 
-// ============================
+    // State Access & Control
-// Initialization
+    evse_state_t evse_get_state(void);
-// ============================
+    void evse_set_state(evse_state_t state);
+    const char *evse_state_to_str(evse_state_t state);
 
-/**
+    // ---------------------------
- * @brief Initializes the EVSE state machine and default state.
+    // State Evaluation Helpers
- */
+    // ---------------------------
-void evse_state_init(void);
 
-/**
+    /**
- * @brief Periodic tick for state handling (optional hook).
+     * @brief True se existe uma sessão "lógica" ativa (carro ligado e autorizado/pronto ou a carregar).
- */
+     * Inclui B2, C1/C2, D1/D2.
-void evse_state_tick(void);
+     */
+    bool evse_state_is_session(evse_state_t state);
 
-// ============================
+    /**
-// State Access & Control
+     * @brief True se o EVSE está a fornecer energia (relé ON).
-// ============================
+     * Estados com energia: C2 e D2.
+     *
+     * Nota: isto substitui a antiga interpretação “C1/C2”.
+     */
+    bool evse_state_is_charging(evse_state_t state);
 
-/**
+    /**
- * @brief Returns the current EVSE state.
+     * @brief True se o EV pediu carga mas o relé ainda está OFF (C1/D1).
- */
+     */
-evse_state_t evse_get_state(void);
+    bool evse_state_is_requesting(evse_state_t state);
 
-/**
+    /**
- * @brief Sets the current EVSE state and emits a change event if needed.
+     * @brief True se há fluxo de energia (alias explícito para charging).
- */
+     */
-void evse_set_state(evse_state_t state);
+    bool evse_state_is_power_flowing(evse_state_t state);
 
-/**
+    /**
- * @brief Converts the state enum into a human-readable string.
+     * @brief True se o EV está fisicamente ligado (B1 e além).
- */
+     */
-const char* evse_state_to_str(evse_state_t state);
+    bool evse_state_is_plugged(evse_state_t state);
 
-// ============================
+    // Authorization Control
-// State Evaluation Helpers
+    void evse_state_set_authorized(bool authorized);
-// ============================
+    bool evse_state_get_authorized(void);
-
-/**
- * @brief True if EV is in an active session (B2, C1, C2).
- */
-bool evse_state_is_session(evse_state_t state);
-
-/**
- * @brief True if EV is actively charging (C1, C2).
- */
-bool evse_state_is_charging(evse_state_t state);
-
-/**
- * @brief True if EV is physically plugged in (B1 and beyond).
- */
-bool evse_state_is_plugged(evse_state_t state);
-
-// ============================
-// Authorization Control
-// ============================
-
-/**
- * @brief Sets whether the EV is authorized to charge.
- */
-void evse_state_set_authorized(bool authorized);
-
-/**
- * @brief Gets whether the EV is currently authorized.
- */
-bool evse_state_get_authorized(void);
 
 #ifdef __cplusplus
 }

components/evse_link/CMakeLists.txt

@@ -9,8 +9,8 @@ set(srcs
 
 idf_component_register(SRCS "${srcs}"
                     INCLUDE_DIRS "include"
-                    PRIV_REQUIRES driver esp_timer nvs_flash
+                    PRIV_REQUIRES driver esp_timer
-                    REQUIRES config evse loadbalancer)
+                    REQUIRES config evse loadbalancer storage_service)
 
 
 

components/evse_link/include/evse_link.h

@@ -1,3 +1,4 @@
+// === Início de: components/evse_link/include/evse_link.h ===
 #ifndef EVSE_LINK_H_
 #define EVSE_LINK_H_
 
@@ -43,3 +44,5 @@ void evse_link_set_enabled(bool enabled);
 bool evse_link_is_enabled(void);
 
 #endif // EVSE_LINK_H_
+
+// === Fim de: components/evse_link/include/evse_link.h ===

components/evse_link/include/evse_link_events.h

@@ -1,31 +1,29 @@
-// === Início de: components/evse_link/include/evse_link_events.h ===
 #ifndef EVSE_LINK_EVENTS_H_
 #define EVSE_LINK_EVENTS_H_
 
 #include "esp_event.h"
+#include <stdint.h>
 
-// Base de eventos do EVSE-Link
 ESP_EVENT_DECLARE_BASE(EVSE_LINK_EVENTS);
 
-// Tamanho máximo de tag propagada via EVSE-Link (inclui NUL)
 #define EVSE_LINK_TAG_MAX_LEN 32
 
-// IDs de eventos EVSE-Link
 typedef enum {
-    LINK_EVENT_FRAME_RECEIVED,       // qualquer frame válido
+    LINK_EVENT_FRAME_RECEIVED,
-    LINK_EVENT_SLAVE_ONLINE,         // heartbeat recebido primeira vez
+    LINK_EVENT_SLAVE_ONLINE,         // payload: evse_link_slave_presence_event_t
-    LINK_EVENT_SLAVE_OFFLINE,        // sem heartbeat no timeout
+    LINK_EVENT_SLAVE_OFFLINE,        // payload: evse_link_slave_presence_event_t (master-side) ou NULL (slave-side fallback)
-    LINK_EVENT_MASTER_POLL_SENT,     // opcional: poll enviado pelo master
+    LINK_EVENT_MASTER_POLL_SENT,
     LINK_EVENT_CURRENT_LIMIT_APPLIED,
-    LINK_EVENT_SLAVE_CONFIG_UPDATED, // config atualizada pelo master
+    LINK_EVENT_SLAVE_CONFIG_UPDATED,
-    LINK_EVENT_REMOTE_AUTH_GRANTED   // autorização remota (master -> slave)
+    LINK_EVENT_REMOTE_AUTH_GRANTED
 } evse_link_event_t;
 
-// Payload para LINK_EVENT_REMOTE_AUTH_GRANTED
 typedef struct {
-    char tag[EVSE_LINK_TAG_MAX_LEN]; // idTag enviada pelo master
+    char tag[EVSE_LINK_TAG_MAX_LEN];
 } evse_link_auth_grant_event_t;
 
-#endif // EVSE_LINK_EVENTS_H_
+typedef struct {
+    uint8_t slave_id;
+} evse_link_slave_presence_event_t;
 
-// === Fim de: components/evse_link/include/evse_link_events.h ===
+#endif // EVSE_LINK_EVENTS_H_

components/evse_link/include/evse_link_framing.h

@@ -5,24 +5,39 @@
 #include <stdbool.h>
 #include "driver/uart.h"
 
-// UART instance and configuration
+// UART baud/buffer configuration
-#define UART_PORT        UART_NUM_2     // Usa a UART2
+#define UART_BAUDRATE 9600
-#define UART_BAUDRATE    115200
 #define UART_RX_BUF_SIZE 256
 
-// GPIO pin assignments for UART (ajuste conforme o hardware)
+// Select EVSE-Link physical layer at compile time.
-#define UART_TXD         17             // TX -> DI do MAX3485
+// 0 = production RS485: UART2 GPIO17/16 + RTS/DE GPIO2
-#define UART_RXD         16             // RX -> RO do MAX3485
+// 1 = emergency/internal UART TTL: UART1 GPIO21/22, no RS485/RTS
-#define UART_RTS         2              // RTS -> DE+RE do MAX3485
+#ifndef EVSE_LINK_USE_UART_TTL
+#define EVSE_LINK_USE_UART_TTL 0
+#endif
 
-// Conveniência: nomes usados no .c
+#if EVSE_LINK_USE_UART_TTL
-#define TX_PIN           UART_TXD
-#define RX_PIN           UART_RXD
-#define RTS_PIN          UART_RTS
 
+#define UART_PORT UART_NUM_1
+#define TX_PIN 21
+#define RX_PIN 22
+#define RTS_PIN UART_PIN_NO_CHANGE
+#define EVSE_LINK_UART_MODE UART_MODE_UART
+#define EVSE_LINK_PHY_NAME "UART_TTL"
+
+#else
+
+#define UART_PORT UART_NUM_2
+#define TX_PIN 17
+#define RX_PIN 16
+#define RTS_PIN 2
+#define EVSE_LINK_UART_MODE UART_MODE_RS485_HALF_DUPLEX
+#define EVSE_LINK_PHY_NAME "RS485"
+
+#endif
 // Frame delimiters
-#define MAGIC_START           0x7E
+#define MAGIC_START 0x7E
-#define MAGIC_END             0x7F
+#define MAGIC_END 0x7F
 
 // Maximum payload (excluding sequence byte)
 #define EVSE_LINK_MAX_PAYLOAD 254

components/evse_link/src/evse_link.c

@@ -1,177 +1,200 @@
 // components/evse_link/src/evse_link.c
+//
+// Camada de transporte EVSE-Link:
+// - carrega config (mode/self_id/enabled)
+// - init do framing
+// - task RX (UART -> framing)
+// - entrega frames completos ao callback registado
+//
+// NOTA: a logica de protocolo (CMD_POLL / ACK / etc.) deve ficar em
+// evse_link_master.c / evse_link_slave.c.
 
 #include "evse_link.h"
 #include "evse_link_framing.h"
+
 #include "driver/uart.h"
-#include "nvs.h"
 #include "esp_log.h"
+#include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
-#include "freertos/semphr.h"
+
+#include <stdbool.h>
+#include <stdint.h>
+
+#include "storage_service.h"
 
 static const char *TAG = "evse_link";
 
-// NVS keys
 #define _NVS_NAMESPACE "evse_link"
-#define _NVS_MODE_KEY "mode"
+#define _KEY_MODE "mode"
-#define _NVS_ID_KEY "self_id"
+#define _KEY_SELF_ID "self_id"
-#define _NVS_ENABLED_KEY "enabled"
+#define _KEY_ENABLED "enabled"
 
-// UART parameters
-#define UART_PORT UART_NUM_2
-#define UART_RX_BUF_SIZE 256
-
-// Runtime config
 static evse_link_mode_t _mode = EVSE_LINK_MODE_MASTER;
 static uint8_t _self_id = 0x01;
 static bool _enabled = false;
 
-// Registered Rx callback
 static evse_link_rx_cb_t _rx_cb = NULL;
+static bool s_evse_link_inited = false;
 
-// Forward declarations
 extern void evse_link_master_init(void);
 extern void evse_link_slave_init(void);
 
 static void framing_rx_cb(uint8_t src, uint8_t dest,
                           const uint8_t *payload, uint8_t len)
 {
-    ESP_LOGD(TAG, "framing_rx_cb: src=0x%02X dest=0x%02X len=%u", src, dest, len);
     if (_rx_cb)
-    {
         _rx_cb(src, dest, payload, len);
-    }
 }
 
-// Register protocol-level Rx callback
 void evse_link_register_rx_cb(evse_link_rx_cb_t cb)
 {
     _rx_cb = cb;
 }
 
-// Load config from NVS
-enum
-{
-    EV_OK = ESP_OK
-};
 static void load_link_config(void)
 {
-    nvs_handle_t handle;
+    uint8_t u8 = 0;
-    if (nvs_open(_NVS_NAMESPACE, NVS_READONLY, &handle) != EV_OK)
-    {
-        ESP_LOGW(TAG, "NVS open failed, using defaults");
-        return;
-    }
-    uint8_t mode, id, en;
-    if (nvs_get_u8(handle, _NVS_MODE_KEY, &mode) == EV_OK &&
-        (mode == EVSE_LINK_MODE_MASTER || mode == EVSE_LINK_MODE_SLAVE))
-    {
-        _mode = (evse_link_mode_t)mode;
-    }
-    if (nvs_get_u8(handle, _NVS_ID_KEY, &id) == EV_OK)
-    {
-        _self_id = id;
-    }
-    if (nvs_get_u8(handle, _NVS_ENABLED_KEY, &en) == EV_OK)
-    {
-        _enabled = (en != 0);
-    }
-    nvs_close(handle);
-}
 
-// Save config to NVS
+    esp_err_t err = storage_get_u8_sync(_NVS_NAMESPACE, _KEY_MODE, &u8, pdMS_TO_TICKS(500));
-static void save_link_config(void)
+    if (err == ESP_OK && (u8 == (uint8_t)EVSE_LINK_MODE_MASTER || u8 == (uint8_t)EVSE_LINK_MODE_SLAVE))
-{
+        _mode = (evse_link_mode_t)u8;
-    nvs_handle_t handle;
-    if (nvs_open(_NVS_NAMESPACE, NVS_READWRITE, &handle) == EV_OK)
-    {
-        nvs_set_u8(handle, _NVS_MODE_KEY, (uint8_t)_mode);
-        nvs_set_u8(handle, _NVS_ID_KEY, _self_id);
-        nvs_set_u8(handle, _NVS_ENABLED_KEY, _enabled ? 1 : 0);
-        nvs_commit(handle);
-        nvs_close(handle);
-    }
     else
     {
-        ESP_LOGE(TAG, "Failed to save NVS");
+        _mode = EVSE_LINK_MODE_MASTER;
+        (void)storage_set_u8_async(_NVS_NAMESPACE, _KEY_MODE, (uint8_t)_mode);
+        ESP_LOGW(TAG, "Missing/invalid mode (%s) -> default MASTER", esp_err_to_name(err));
+    }
+
+    err = storage_get_u8_sync(_NVS_NAMESPACE, _KEY_SELF_ID, &u8, pdMS_TO_TICKS(500));
+    if (err == ESP_OK)
+        _self_id = u8;
+    else
+    {
+        _self_id = 0x01;
+        (void)storage_set_u8_async(_NVS_NAMESPACE, _KEY_SELF_ID, _self_id);
+        ESP_LOGW(TAG, "Missing self_id (%s) -> default 0x%02X", esp_err_to_name(err), _self_id);
+    }
+
+    err = storage_get_u8_sync(_NVS_NAMESPACE, _KEY_ENABLED, &u8, pdMS_TO_TICKS(500));
+    if (err == ESP_OK && u8 <= 1)
+        _enabled = (u8 != 0);
+    else
+    {
+        _enabled = false;
+        (void)storage_set_u8_async(_NVS_NAMESPACE, _KEY_ENABLED, 0);
+        ESP_LOGW(TAG, "Missing/invalid enabled (%s) -> default false", esp_err_to_name(err));
     }
 }
 
-// Getters/setters
+static void save_link_config(void)
+{
+    (void)storage_set_u8_async(_NVS_NAMESPACE, _KEY_MODE, (uint8_t)_mode);
+    (void)storage_set_u8_async(_NVS_NAMESPACE, _KEY_SELF_ID, _self_id);
+    (void)storage_set_u8_async(_NVS_NAMESPACE, _KEY_ENABLED, _enabled ? 1 : 0);
+}
+
 void evse_link_set_mode(evse_link_mode_t m)
 {
+    if (m != EVSE_LINK_MODE_MASTER && m != EVSE_LINK_MODE_SLAVE)
+    {
+        ESP_LOGW(TAG, "Invalid link mode: %d", (int)m);
+        return;
+    }
+    if (_mode == m)
+        return;
+
     _mode = m;
     save_link_config();
 }
+
 evse_link_mode_t evse_link_get_mode(void) { return _mode; }
+
 void evse_link_set_self_id(uint8_t id)
 {
+    if (_self_id == id)
+        return;
     _self_id = id;
     save_link_config();
 }
+
 uint8_t evse_link_get_self_id(void) { return _self_id; }
+
 void evse_link_set_enabled(bool en)
 {
+    if (_enabled == en)
+        return;
     _enabled = en;
     save_link_config();
 }
+
 bool evse_link_is_enabled(void) { return _enabled; }
 
-// RX task: reads bytes from UART and feeds framing
 static void evse_link_rx_task(void *arg)
 {
+    (void)arg;
+    ESP_LOGI(TAG, "evse_link_rx_task started");
+
     uint8_t buf[UART_RX_BUF_SIZE];
+
     while (true)
     {
         int len = uart_read_bytes(UART_PORT, buf, sizeof(buf), pdMS_TO_TICKS(1000));
         if (len > 0)
         {
+            ESP_LOGD(TAG, "UART RX: len=%d first=0x%02X last=0x%02X", len, buf[0], buf[len - 1]);
+
             for (int i = 0; i < len; ++i)
-            {
                 evse_link_recv_byte(buf[i]);
-            }
         }
     }
 }
 
-// Initialize EVSE-Link component
 void evse_link_init(void)
 {
-    load_link_config();
+    if (s_evse_link_inited)
+    {
+        ESP_LOGW(TAG, "evse_link_init called twice; ignoring");
+        return;
+    }
+    s_evse_link_inited = true;
+
+    esp_err_t se = storage_service_init();
+    if (se == ESP_OK)
+        load_link_config();
+    else
+        ESP_LOGE(TAG, "storage_service_init failed: %s (defaults in RAM)", esp_err_to_name(se));
 
     ESP_LOGI(TAG, "Link init: mode=%c id=0x%02X enabled=%d",
              _mode == EVSE_LINK_MODE_MASTER ? 'M' : 'S',
              _self_id, _enabled);
+
     if (!_enabled)
         return;
 
-    // 1) framing layer init (sets up mutex, UART driver, etc.)
     evse_link_framing_init();
     evse_link_framing_register_cb(framing_rx_cb);
 
-    // 2) start RX task
+    if (xTaskCreate(evse_link_rx_task, "evse_link_rx", 4096, NULL, 4, NULL) != pdPASS)
-    xTaskCreate(evse_link_rx_task, "evse_link_rx", 4096, NULL, 4, NULL);
+    {
+        ESP_LOGE(TAG, "Failed to create evse_link_rx task");
+        return;
+    }
 
-    // 3) delegate to master or slave
     if (_mode == EVSE_LINK_MODE_MASTER)
-    {
         evse_link_master_init();
-    }
     else
-    {
         evse_link_slave_init();
-    }
 }
 
-// Send a frame (delegates to framing module)
 bool evse_link_send(uint8_t dest, const uint8_t *payload, uint8_t len)
 {
     if (!evse_link_is_enabled())
         return false;
+
     uint8_t src = evse_link_get_self_id();
     return evse_link_framing_send(dest, src, payload, len);
 }
 
-// Receive byte (delegates to framing module)
 void evse_link_recv_byte(uint8_t byte)
 {
     evse_link_framing_recv_byte(byte);

components/evse_link/src/evse_link_framing.c

@@ -1,8 +1,29 @@
+// components/evse_link/src/evse_link_framing.c
+//
+// EVSE-Link framing (RS-485 HALF DUPLEX via UART driver)
+// - Usa UART_MODE_RS485_HALF_DUPLEX (driver controla RTS => DE//RE)
+// - Configura RX timeout + RX full threshold para evitar “len=120”
+// - Remove controlo manual de GPIO do RTS
+//
+// Requisitos:
+// - MAX3485 com DE e /RE juntos ligados ao RTS_PIN
+// - RTS_PIN definido em evse_link_framing.h (ex.: GPIO2; recomendado mudar no futuro)
+//
+// Notas:
+// - Se o teu hardware inverter a lógica do RTS (raro), define EVSE_LINK_RTS_INVERT=1
+
 #include "evse_link_framing.h"
+
 #include "driver/uart.h"
 #include "freertos/semphr.h"
+
 #include "esp_log.h"
+#include "esp_err.h"
+#include "esp_timer.h"
+
 #include <string.h>
+#include <stdint.h>
+#include <stdbool.h>
 
 static const char *TAG = "evse_framing";
 
@@ -10,118 +31,261 @@ static SemaphoreHandle_t tx_mutex = NULL;
 static uint8_t seq = 0;
 static evse_link_frame_cb_t rx_cb = NULL;
 
-// CRC-8 (polynomial 0x07)
+static bool s_framing_inited = false;
-static uint8_t crc8(const uint8_t *data, uint8_t len)
+
+// ---- Tunables (fallbacks) ----
+#ifndef EVSE_LINK_INTERBYTE_TIMEOUT_US
+// Timeout inter-byte: se um frame morrer a meio, reseta o parser
+#define EVSE_LINK_INTERBYTE_TIMEOUT_US 5000
+#endif
+
+// Rate-limit para warnings (em microsegundos)
+#define LOG_RATELIMIT_US 1000000 // 1s
+
+// RX tuning (evita acumular ~120 bytes antes de "acordar")
+#ifndef EVSE_LINK_RX_TIMEOUT
+// Timeout do UART TOUT feature (em "character times"). 3..10 funciona bem.
+#define EVSE_LINK_RX_TIMEOUT 3
+#endif
+
+#ifndef EVSE_LINK_RX_FULL_THRESH
+// Gera interrupção quando FIFO tem pelo menos N bytes (1..120). 4 é um bom default.
+#define EVSE_LINK_RX_FULL_THRESH 1
+#endif
+
+#ifndef EVSE_LINK_RTS_INVERT
+// Se precisares inverter RTS (muito raro), define para 1 no build.
+#define EVSE_LINK_RTS_INVERT 0
+#endif
+
+static inline bool log_ratelimit_ok(int64_t *last_us, int64_t interval_us)
 {
-    uint8_t crc = 0;
+    const int64_t now = esp_timer_get_time();
-    for (uint8_t i = 0; i < len; ++i) {
+    if (*last_us == 0 || (now - *last_us) > interval_us)
-        crc ^= data[i];
+    {
-        for (uint8_t b = 0; b < 8; ++b) {
+        *last_us = now;
-            if (crc & 0x80) {
+        return true;
-                crc = (uint8_t)((crc << 1) ^ 0x07);
+    }
-            } else {
+    return false;
-                crc <<= 1;
+}
-            }
+
-        }
+// CRC-8 (poly 0x07), MSB-first, init=0x00
+static uint8_t crc8_update(uint8_t crc, uint8_t data)
+{
+    crc ^= data;
+    for (uint8_t b = 0; b < 8; ++b)
+    {
+        if (crc & 0x80)
+            crc = (uint8_t)((crc << 1) ^ 0x07);
+        else
+            crc <<= 1;
     }
     return crc;
 }
 
-void evse_link_framing_init(void)
+static esp_err_t configure_uart(void)
 {
-    // Mutex para proteger TX (framings de várias tasks)
-    tx_mutex = xSemaphoreCreateMutex();
-
-    // Instala driver UART
-    uart_driver_install(UART_PORT,
-                        UART_RX_BUF_SIZE * 2,   // RX buffer
-                        0,                      // TX buffer (0 = usa buffer interno)
-                        0,
-                        NULL,
-                        0);
-
     uart_config_t cfg = {
         .baud_rate = UART_BAUDRATE,
         .data_bits = UART_DATA_8_BITS,
-        .parity    = UART_PARITY_DISABLE,
+        .parity = UART_PARITY_DISABLE,
         .stop_bits = UART_STOP_BITS_1,
         .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
         .source_clk = UART_SCLK_DEFAULT,
     };
-    uart_param_config(UART_PORT, &cfg);
 
-    // Define pinos: TX, RX e RTS (RTS ligado a DE+RE do transceiver RS485)
+    esp_err_t err = uart_param_config(UART_PORT, &cfg);
-    uart_set_pin(UART_PORT,
+    if (err != ESP_OK)
-                 TX_PIN,           // MB_UART_TXD (ex: GPIO17)
+    {
-                 RX_PIN,           // MB_UART_RXD (ex: GPIO16)
+        ESP_LOGE(TAG, "uart_param_config failed: %s", esp_err_to_name(err));
-                 RTS_PIN,          // MB_UART_RTS (ex: GPIO2, DE+RE)
+        return err;
-                 UART_PIN_NO_CHANGE);
+    }
 
-    // Modo RS485 half-duplex: driver controla RTS/DE/RE automaticamente
+    // TX/RX/RTS na UART (RTS controla DE//RE em RS485 half-duplex)
-    uart_set_mode(UART_PORT, UART_MODE_RS485_HALF_DUPLEX);
+    err = uart_set_pin(UART_PORT, TX_PIN, RX_PIN, RTS_PIN, UART_PIN_NO_CHANGE);
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "uart_set_pin failed: %s", esp_err_to_name(err));
+        return err;
+    }
 
-    ESP_LOGI(TAG, "Framing init: UART%d TX=%d RX=%d RTS(DE/RE)=%d baud=%d",
+    // RS-485 HALF DUPLEX (driver controla RTS automaticamente)
+    err = uart_set_mode(UART_PORT, EVSE_LINK_UART_MODE);
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "uart_set_mode(%s) failed: %s",
+                 EVSE_LINK_PHY_NAME,
+                 esp_err_to_name(err));
+        return err;
+    }
+
+    // Ajustes para RX responsivo (evita "len=120")
+    (void)uart_set_rx_full_threshold(UART_PORT, EVSE_LINK_RX_FULL_THRESH);
+    (void)uart_set_rx_timeout(UART_PORT, EVSE_LINK_RX_TIMEOUT);
+
+    // Opcional: inverter RTS se hardware exigir
+    if (!EVSE_LINK_USE_UART_TTL && EVSE_LINK_RTS_INVERT)
+    {
+        (void)uart_set_line_inverse(UART_PORT, UART_SIGNAL_RTS_INV);
+        ESP_LOGW(TAG, "RS485 driver: RTS inverted");
+    }
+
+    ESP_LOGW(TAG,
+             "%s driver enabled: UART%d TX=%d RX=%d RTS=%d baud=%d rx_to=%d rx_thresh=%d",
+             EVSE_LINK_PHY_NAME,
+             UART_PORT,
+             TX_PIN,
+             RX_PIN,
+             RTS_PIN,
+             UART_BAUDRATE,
+             EVSE_LINK_RX_TIMEOUT,
+             EVSE_LINK_RX_FULL_THRESH);
+
+    return ESP_OK;
+}
+
+void evse_link_framing_init(void)
+{
+    if (s_framing_inited)
+    {
+        ESP_LOGI(TAG, "Framing already initialized");
+        return;
+    }
+
+    if (!tx_mutex)
+    {
+        tx_mutex = xSemaphoreCreateMutex();
+        if (!tx_mutex)
+        {
+            ESP_LOGE(TAG, "Failed to create TX mutex");
+            return;
+        }
+    }
+
+    // Se o driver já estiver instalado, só reconfigura e aplica RX tuning.
+    if (uart_is_driver_installed(UART_PORT))
+    {
+        esp_err_t err = configure_uart();
+        if (err == ESP_OK)
+        {
+            s_framing_inited = true;
+            ESP_LOGW(TAG, "UART%d driver already installed -> configured for RS485 HALF DUPLEX", UART_PORT);
+            (void)uart_flush_input(UART_PORT);
+        }
+        else
+        {
+            ESP_LOGE(TAG, "Failed to configure already-installed UART%d", UART_PORT);
+        }
+        return;
+    }
+
+    // Instala driver UART
+    esp_err_t err = uart_driver_install(UART_PORT,
+                                        UART_RX_BUF_SIZE * 2, // RX buffer (ringbuffer)
+                                        0,                    // TX buffer (não usado)
+                                        0,                    // event queue size
+                                        NULL,                 // event queue
+                                        0);
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "uart_driver_install failed: %s", esp_err_to_name(err));
+        return;
+    }
+
+    err = configure_uart();
+    if (err != ESP_OK)
+        return;
+
+    (void)uart_flush_input(UART_PORT);
+
+    s_framing_inited = true;
+
+    ESP_LOGI(TAG, "Framing init (RS485 driver): UART%d TX=%d RX=%d RTS=%d baud=%d",
              UART_PORT, TX_PIN, RX_PIN, RTS_PIN, UART_BAUDRATE);
 }
 
 bool evse_link_framing_send(uint8_t dest, uint8_t src,
                             const uint8_t *payload, uint8_t len)
 {
-    if (len > EVSE_LINK_MAX_PAYLOAD) {
+    if (!s_framing_inited)
-        ESP_LOGW(TAG, "Payload too large: %u (max=%u)",
+    {
-                 len, EVSE_LINK_MAX_PAYLOAD);
+        ESP_LOGE(TAG, "Framing not initialized");
         return false;
     }
 
-    if (xSemaphoreTake(tx_mutex, portMAX_DELAY) != pdTRUE) {
+    if (len > EVSE_LINK_MAX_PAYLOAD)
+    {
+        ESP_LOGW(TAG, "Payload too large: %u (max=%u)", len, EVSE_LINK_MAX_PAYLOAD);
+        return false;
+    }
+
+    if (len > 0 && payload == NULL)
+    {
+        ESP_LOGW(TAG, "Invalid send: len=%u but payload=NULL", len);
+        return false;
+    }
+
+    if (!tx_mutex)
+    {
+        ESP_LOGE(TAG, "TX mutex is NULL (framing_init not called?)");
+        return false;
+    }
+
+    if (xSemaphoreTake(tx_mutex, portMAX_DELAY) != pdTRUE)
+    {
         ESP_LOGW(TAG, "Failed to take TX mutex");
         return false;
     }
 
     // Frame: START | DEST | SRC | LEN | SEQ | PAYLOAD | CRC | END
+    // LEN on wire = SEQ + PAYLOAD (>=1)
     uint8_t frame[EVSE_LINK_MAX_PAYLOAD + 7];
     int idx = 0;
 
     frame[idx++] = MAGIC_START;
     frame[idx++] = dest;
     frame[idx++] = src;
-    frame[idx++] = (uint8_t)(len + 1);  // LEN = SEQ + payload
+    frame[idx++] = (uint8_t)(len + 1);
     frame[idx++] = seq;
 
-    if (len > 0 && payload != NULL) {
+    if (len > 0)
+    {
         memcpy(&frame[idx], payload, len);
         idx += len;
     }
 
-    // CRC cobre: DEST + SRC + LEN + SEQ + PAYLOAD
+    // CRC: DEST + SRC + LEN + SEQ + PAYLOAD
-    uint8_t crc_input[3 + 1 + EVSE_LINK_MAX_PAYLOAD];
+    uint8_t crc = 0;
-    memcpy(crc_input, &frame[1], 3 + 1 + len);
+    crc = crc8_update(crc, dest);
-    uint8_t crc = crc8(crc_input, (uint8_t)(3 + 1 + len));
+    crc = crc8_update(crc, src);
-    frame[idx++] = crc;
+    crc = crc8_update(crc, (uint8_t)(len + 1));
+    crc = crc8_update(crc, seq);
+    for (uint8_t i = 0; i < len; ++i)
+        crc = crc8_update(crc, payload[i]);
 
+    frame[idx++] = crc;
     frame[idx++] = MAGIC_END;
 
-    // Envia frame completo
     int written = uart_write_bytes(UART_PORT, (const char *)frame, idx);
-    if (written != idx) {
+    if (written != idx)
+    {
         ESP_LOGW(TAG, "uart_write_bytes wrote %d of %d", written, idx);
     }
 
-    // Aguarda TX terminar (o driver controla DE/RE via RTS)
+    // Aguarda TX terminar; driver RS485 devolve RTS para RX automaticamente.
-    uart_wait_tx_done(UART_PORT, pdMS_TO_TICKS(20));
+    (void)uart_wait_tx_done(UART_PORT, pdMS_TO_TICKS(700));
 
     xSemaphoreGive(tx_mutex);
 
-    ESP_LOGI(TAG, "Sent frame dest=0x%02X src=0x%02X len=%u seq=%u",
+    ESP_LOGD(TAG, "Sent frame dest=0x%02X src=0x%02X len=%u seq=%u",
              dest, src, len, seq);
 
-    seq++;  // incrementa sequência após envio
+    seq++;
     return true;
 }
 
 void evse_link_framing_recv_byte(uint8_t b)
 {
-    // Máquina de estados para parsing do frame
     static enum {
         ST_WAIT_START = 0,
         ST_WAIT_DEST,
@@ -133,17 +297,46 @@ void evse_link_framing_recv_byte(uint8_t b)
         ST_WAIT_END
     } rx_state = ST_WAIT_START;
 
-    static uint8_t  rx_dest;
+    static uint8_t rx_dest;
-    static uint8_t  rx_src;
+    static uint8_t rx_src;
-    static uint8_t  rx_len;   // inclui SEQ + payload
+    static uint8_t rx_len; // inclui SEQ + payload (>=1)
-    static uint8_t  rx_seq;
+    static uint8_t rx_seq;
-    static uint8_t  rx_buf[EVSE_LINK_MAX_PAYLOAD];
+    static uint8_t rx_buf[EVSE_LINK_MAX_PAYLOAD];
-    static uint8_t  rx_pos;
+    static uint8_t rx_pos;
-    static uint8_t  rx_crc;
+    static uint8_t rx_crc;
 
-    switch (rx_state) {
+    static int64_t s_last_byte_us = 0;
+    static int64_t s_last_bad_len_log_us = 0;
+    static int64_t s_last_bad_crc_log_us = 0;
+
+#define RESET_PARSER()            \
+    do                            \
+    {                             \
+        rx_state = ST_WAIT_START; \
+        rx_dest = 0;              \
+        rx_src = 0;               \
+        rx_len = 0;               \
+        rx_seq = 0;               \
+        rx_pos = 0;               \
+        rx_crc = 0;               \
+    } while (0)
+
+    const int64_t now_us = esp_timer_get_time();
+
+    // Timeout inter-byte: frame morreu a meio -> reseta
+    if (rx_state != ST_WAIT_START && s_last_byte_us != 0 &&
+        (now_us - s_last_byte_us) > EVSE_LINK_INTERBYTE_TIMEOUT_US)
+    {
+        RESET_PARSER();
+    }
+    s_last_byte_us = now_us;
+
+    switch (rx_state)
+    {
     case ST_WAIT_START:
-        if (b == MAGIC_START) {
+        if (b == MAGIC_START)
+        {
+            rx_pos = 0;
             rx_state = ST_WAIT_DEST;
         }
         break;
@@ -159,28 +352,50 @@ void evse_link_framing_recv_byte(uint8_t b)
         break;
 
     case ST_WAIT_LEN:
-        rx_len = b;    // LEN = SEQ + payload
+        rx_len = b;
+
+        // rx_len = SEQ + payload => >=1 e <= MAX+1
+        if (rx_len < 1 || rx_len > (uint8_t)(EVSE_LINK_MAX_PAYLOAD + 1))
+        {
+            if (log_ratelimit_ok(&s_last_bad_len_log_us, LOG_RATELIMIT_US))
+            {
+                ESP_LOGW(TAG, "Invalid LEN=%u (max=%u), dropping frame",
+                         rx_len, (unsigned)(EVSE_LINK_MAX_PAYLOAD + 1));
+            }
+            RESET_PARSER();
+            break;
+        }
+
         rx_pos = 0;
         rx_state = ST_WAIT_SEQ;
         break;
 
     case ST_WAIT_SEQ:
         rx_seq = b;
-        if (rx_len > 1) {
+        rx_state = (rx_len > 1) ? ST_READING : ST_WAIT_CRC;
-            rx_state = ST_READING;
-        } else {
-            rx_state = ST_WAIT_CRC;
-        }
         break;
 
     case ST_READING:
-        if (rx_pos < EVSE_LINK_MAX_PAYLOAD) {
+    {
+        const uint8_t payload_len = (uint8_t)(rx_len - 1);
+
+        if (payload_len > EVSE_LINK_MAX_PAYLOAD)
+        {
+            if (log_ratelimit_ok(&s_last_bad_len_log_us, LOG_RATELIMIT_US))
+            {
+                ESP_LOGW(TAG, "Payload len too big: %u", (unsigned)payload_len);
+            }
+            RESET_PARSER();
+            break;
+        }
+
+        if (rx_pos < EVSE_LINK_MAX_PAYLOAD)
             rx_buf[rx_pos++] = b;
-        }
+
-        if (rx_pos >= (uint8_t)(rx_len - 1)) { // payload completo
+        if (rx_pos >= payload_len)
             rx_state = ST_WAIT_CRC;
-        }
         break;
+    }
 
     case ST_WAIT_CRC:
         rx_crc = b;
@@ -188,41 +403,44 @@ void evse_link_framing_recv_byte(uint8_t b)
         break;
 
     case ST_WAIT_END:
-        if (b == MAGIC_END) {
+        if (b == MAGIC_END)
-            // Monta buffer para verificar CRC:
+        {
-            // DEST + SRC + LEN + SEQ + PAYLOAD
+            uint8_t expected = 0;
-            uint8_t temp[3 + 1 + EVSE_LINK_MAX_PAYLOAD];
+            expected = crc8_update(expected, rx_dest);
-            int temp_len = 0;
+            expected = crc8_update(expected, rx_src);
-            temp[temp_len++] = rx_dest;
+            expected = crc8_update(expected, rx_len);
-            temp[temp_len++] = rx_src;
+            expected = crc8_update(expected, rx_seq);
-            temp[temp_len++] = rx_len;
-            temp[temp_len++] = rx_seq;
-            if (rx_len > 1) {
-                memcpy(&temp[temp_len], rx_buf, rx_len - 1);
-                temp_len += rx_len - 1;
-            }
 
-            uint8_t expected = crc8(temp, (uint8_t)temp_len);
+            const uint8_t payload_len = (uint8_t)(rx_len - 1);
-            if (expected == rx_crc) {
+            for (uint8_t i = 0; i < payload_len; ++i)
-                uint8_t payload_len = (uint8_t)(rx_len - 1); // exclui SEQ
+                expected = crc8_update(expected, rx_buf[i]);
-                if (rx_cb) {
+
+            if (expected == rx_crc)
+            {
+                if (rx_cb)
                     rx_cb(rx_src, rx_dest, rx_buf, payload_len);
-                }
+
                 ESP_LOGD(TAG, "Frame OK src=0x%02X dest=0x%02X len=%u seq=%u",
                          rx_src, rx_dest, payload_len, rx_seq);
-            } else {
+            }
-                ESP_LOGW(TAG, "CRC mismatch: expected=0x%02X got=0x%02X",
+            else
-                         expected, rx_crc);
+            {
+                if (log_ratelimit_ok(&s_last_bad_crc_log_us, LOG_RATELIMIT_US))
+                {
+                    ESP_LOGW(TAG, "CRC mismatch: expected=0x%02X got=0x%02X",
+                             expected, rx_crc);
+                }
             }
         }
-        // Em qualquer caso, volta a esperar novo frame
+        RESET_PARSER();
-        rx_state = ST_WAIT_START;
         break;
 
     default:
-        rx_state = ST_WAIT_START;
+        RESET_PARSER();
         break;
     }
+
+#undef RESET_PARSER
 }
 
 void evse_link_framing_register_cb(evse_link_frame_cb_t cb)

components/evse_link/src/evse_link_master.c

@@ -1,10 +1,27 @@
+// components/evse_link/src/evse_link_master.c
+//
+// Correções aplicadas:
+// 1) Evitar TX dentro do callback RX (ACK deferido para task -> não bloqueia RX)
+// 2) Dedupe de ACK por slave (evita rajadas se RX vier em chunks / queue acumular)
+// 3) Log quando ACK queue enche (antes era silencioso)
+// 4) Proteção concorrente no s_presence (int64_t não é atómico no ESP32 32-bit)
+// 5) Comentário do poll corrigido + opção de jitter no ACK
+//
+// NOTA: Mantive o teu comportamento (POLL a cada 10s). Se quiseres, muda para 30s.
+
 #include "evse_link.h"
 #include "evse_link_events.h"
+
 #include "freertos/FreeRTOS.h"
-#include "freertos/task.h"
 #include "freertos/timers.h"
+#include "freertos/queue.h"
+#include "freertos/task.h"
+
 #include "esp_log.h"
 #include "esp_event.h"
+#include "esp_timer.h"
+#include "esp_random.h"
+
 #include <stdint.h>
 #include <stdbool.h>
 #include <string.h>
@@ -14,37 +31,180 @@
 
 static const char *TAG = "evse_link_master";
 
-// Link commands
+// Link commands (opcode no payload[0])
-#define CMD_POLL            0x01
+#define CMD_POLL 0x01
-#define CMD_HEARTBEAT       0x02
+#define CMD_HEARTBEAT 0x02
-#define CMD_HEARTBEAT_ACK   0x09
 #define CMD_CONFIG_BROADCAST 0x03
-#define CMD_SET_CURRENT     0x08
+#define CMD_SET_CURRENT 0x08
-#define CMD_AUTH_GRANTED    0x0A   // novo: master concede autorização a slave
+#define CMD_HEARTBEAT_ACK 0x09
+#define CMD_AUTH_GRANTED 0x0A
 
-// payload lengths (exclui byte de opcode)
+// payload lengths (INCLUI opcode)
-#define LEN_POLL_REQ         1         // [ CMD_POLL ]
+#define LEN_HEARTBEAT 6        // [ CMD_HEARTBEAT, charging, hw_max_lo, hw_max_hi, run_lo, run_hi ]
-#define LEN_POLL_RESP        9         // [ CMD_POLL, float V(4), float I(4) ]
+#define LEN_CONFIG_BROADCAST 2 // [ CMD_CONFIG_BROADCAST, ... ]
-#define LEN_HEARTBEAT        6         // [ CMD_HEARTBEAT, charging, hw_max_lo, hw_max_hi, run_lo, run_hi ]
+#define LEN_SET_CURRENT 3      // [ CMD_SET_CURRENT, amps_lo, amps_hi ]
-#define LEN_CONFIG_BROADCAST 2         // [ CMD_CONFIG_BROADCAST, new_max_current ]
+
-#define LEN_SET_CURRENT      3         // [ CMD_SET_CURRENT, limit_lo, limit_hi ]
+// Presence monitoring
-#define LEN_HEARTBEAT_ACK    1
+#define PRESENCE_CHECK_MS 5000
+#define SLAVE_OFFLINE_TIMEOUT_MS 180000
+
+// ACK defer
+#define ACK_QUEUE_LEN 16
+// backoff para espaçar ACK (evita burst)
+// antes era 0..15ms; aqui fica ligeiramente mais suave.
+#define ACK_BACKOFF_MIN_MS 5
+#define ACK_BACKOFF_MAX_MS 35 // jitter 5..35ms
+
+typedef struct
+{
+    int64_t last_seen_us;
+    bool online;
+} slave_presence_t;
+
+static slave_presence_t s_presence[256];
+static TimerHandle_t s_presence_timer = NULL;
+
+// Proteção concorrente (int64_t não é atómico no ESP32)
+static portMUX_TYPE s_presence_mux = portMUX_INITIALIZER_UNLOCKED;
 
-// polling / heartbeat timers interval
 typedef struct
 {
     TimerHandle_t timer;
     TickType_t interval;
 } timer_def_t;
-static timer_def_t poll_timer = {.timer = NULL, .interval = pdMS_TO_TICKS(30000)};
+
-static timer_def_t hb_timer   = {.timer = NULL, .interval = pdMS_TO_TICKS(30000)};
+// POLL a cada 60s (comentário corrigido)
+static timer_def_t poll_timer = {.timer = NULL, .interval = pdMS_TO_TICKS(60000)};
+
+static bool s_handlers_registered = false;
+
+// ACK task/queue
+static QueueHandle_t s_ack_q = NULL;
+static TaskHandle_t s_ack_task = NULL;
+// Dedupe: 1 ACK pendente por slave
+static bool s_ack_pending[256] = {0};
+
+static void post_presence_event(evse_link_event_t evt, uint8_t slave_id)
+{
+    evse_link_slave_presence_event_t p = {.slave_id = slave_id};
+    (void)esp_event_post(EVSE_LINK_EVENTS, evt, &p, sizeof(p), portMAX_DELAY);
+}
+
+static void mark_slave_seen(uint8_t slave_id)
+{
+    const int64_t now = esp_timer_get_time();
+
+    bool was_offline = false;
+
+    portENTER_CRITICAL(&s_presence_mux);
+    slave_presence_t *p = &s_presence[slave_id];
+    p->last_seen_us = now;
+
+    if (!p->online)
+    {
+        p->online = true;
+        was_offline = true;
+    }
+    portEXIT_CRITICAL(&s_presence_mux);
+
+    if (was_offline)
+    {
+        ESP_LOGI(TAG, "Slave 0x%02X ONLINE", slave_id);
+        post_presence_event(LINK_EVENT_SLAVE_ONLINE, slave_id);
+    }
+}
+
+static void presence_timer_cb(TimerHandle_t xTimer)
+{
+    (void)xTimer;
+    const int64_t now = esp_timer_get_time();
+    const int64_t timeout_us = (int64_t)SLAVE_OFFLINE_TIMEOUT_MS * 1000;
+
+    const uint8_t self = evse_link_get_self_id();
+
+    for (int i = 0; i < 256; ++i)
+    {
+        if ((uint8_t)i == self)
+            continue;
+
+        bool online;
+        int64_t last_seen;
+
+        portENTER_CRITICAL(&s_presence_mux);
+        online = s_presence[i].online;
+        last_seen = s_presence[i].last_seen_us;
+        portEXIT_CRITICAL(&s_presence_mux);
+
+        if (!online)
+            continue;
+
+        if (last_seen > 0 && (now - last_seen) > timeout_us)
+        {
+            portENTER_CRITICAL(&s_presence_mux);
+            s_presence[i].online = false;
+            portEXIT_CRITICAL(&s_presence_mux);
+
+            ESP_LOGW(TAG, "Slave 0x%02X OFFLINE (no heartbeat for %d ms)", i, SLAVE_OFFLINE_TIMEOUT_MS);
+            post_presence_event(LINK_EVENT_SLAVE_OFFLINE, (uint8_t)i);
+        }
+    }
+}
+
+// Enfileira ACK sem duplicar por slave
+static void enqueue_ack(uint8_t slave_id)
+{
+    if (!s_ack_q)
+        return;
+
+    // Dedupe: se já existe ACK pendente para este slave, não enfileira outro
+    if (s_ack_pending[slave_id])
+        return;
+
+    s_ack_pending[slave_id] = true;
+
+    if (xQueueSendToBack(s_ack_q, &slave_id, 0) != pdTRUE)
+    {
+        s_ack_pending[slave_id] = false;
+        ESP_LOGW(TAG, "ACK queue full, dropping ACK for 0x%02X", slave_id);
+    }
+}
+
+// --- ACK task (não bloqueia RX) ---
+static void ack_task(void *arg)
+{
+    (void)arg;
+
+    for (;;)
+    {
+        uint8_t slave_id = 0;
+        if (xQueueReceive(s_ack_q, &slave_id, portMAX_DELAY) != pdTRUE)
+            continue;
+
+        // libera dedupe
+        s_ack_pending[slave_id] = false;
+
+        // backoff com jitter
+        uint32_t backoff = ACK_BACKOFF_MIN_MS +
+                           (esp_random() % (ACK_BACKOFF_MAX_MS - ACK_BACKOFF_MIN_MS + 1));
+        vTaskDelay(pdMS_TO_TICKS(backoff));
+
+        uint8_t ack[] = {CMD_HEARTBEAT_ACK};
+        bool ok = evse_link_send(slave_id, ack, sizeof(ack));
+        ESP_LOGI(TAG, "CMD_HEARTBEAT_ACK to 0x%02X ok=%d", slave_id, ok);
+    }
+}
 
 // --- Send new limit to slave ---
 static void on_new_limit(void *arg, esp_event_base_t base, int32_t id, void *data)
 {
-    if (id != LOADBALANCER_EVENT_SLAVE_CURRENT_LIMIT)
+    (void)arg;
+    (void)base;
+
+    if (id != LOADBALANCER_EVENT_SLAVE_CURRENT_LIMIT || data == NULL)
         return;
-    const loadbalancer_slave_limit_event_t *evt = data;
+
+    const loadbalancer_slave_limit_event_t *evt = (const loadbalancer_slave_limit_event_t *)data;
+
     uint8_t slave_id = evt->slave_id;
     uint16_t max_current = evt->max_current;
 
@@ -52,156 +212,179 @@ static void on_new_limit(void *arg, esp_event_base_t base, int32_t id, void *dat
         CMD_SET_CURRENT,
         (uint8_t)(max_current & 0xFF),
         (uint8_t)(max_current >> 8)};
-    evse_link_send(slave_id, buf, sizeof(buf));
+
-    ESP_LOGI(TAG, "Sent SET_CURRENT to 0x%02X: %uA", slave_id, max_current);
+    (void)evse_link_send(slave_id, buf, sizeof(buf));
+    ESP_LOGI(TAG, "Sent SET_CURRENT to 0x%02X: %uA", slave_id, (unsigned)max_current);
 }
 
-// --- Bridge AUTH -> EVSE-Link: enviar AUTH_GRANTED para slaves ---
+// --- Bridge AUTH -> EVSE-Link ---
 static void on_auth_result(void *arg, esp_event_base_t base, int32_t id, void *data)
 {
-    if (base != AUTH_EVENTS || id != AUTH_EVENT_TAG_PROCESSED || data == NULL) {
+    (void)arg;
+
+    if (base != AUTH_EVENTS || id != AUTH_EVENT_TAG_PROCESSED || data == NULL)
         return;
-    }
 
     const auth_tag_event_data_t *ev = (const auth_tag_event_data_t *)data;
 
-    if (!ev->authorized) {
+    if (!ev->authorized)
+    {
         ESP_LOGI(TAG, "Tag %s not authorized, not propagating to slaves", ev->tag);
         return;
     }
 
-    // Construir payload: [ CMD_AUTH_GRANTED, tag..., '\0' ]
     uint8_t buf[1 + EVSE_LINK_TAG_MAX_LEN];
     buf[0] = CMD_AUTH_GRANTED;
 
-    // Copiar tag e garantir NUL
+    // Copia tag e garante NUL
     strncpy((char *)&buf[1], ev->tag, EVSE_LINK_TAG_MAX_LEN - 1);
     ((char *)&buf[1])[EVSE_LINK_TAG_MAX_LEN - 1] = '\0';
 
-    uint8_t payload_len = 1 + (uint8_t)(strlen((char *)&buf[1]) + 1); // opcode + tag + '\0'
+    // Payload inclui opcode + string + NUL
+    uint8_t payload_len = 1 + (uint8_t)(strlen((char *)&buf[1]) + 1);
 
-    // Neste exemplo: broadcast para todos os slaves (0xFF)
+    (void)evse_link_send(0xFF, buf, payload_len);
-    uint8_t dest = 0xFF;
+    ESP_LOGI(TAG, "Sent CMD_AUTH_GRANTED (broadcast) tag=%s", (char *)&buf[1]);
-
-    if (!evse_link_send(dest, buf, payload_len)) {
-        ESP_LOGW(TAG, "Failed to send CMD_AUTH_GRANTED to dest=0x%02X for tag=%s",
-                 dest, (char *)&buf[1]);
-    } else {
-        ESP_LOGI(TAG, "Sent CMD_AUTH_GRANTED to dest=0x%02X for tag=%s",
-                 dest, (char *)&buf[1]);
-    }
 }
 
 // --- Polling broadcast callback ---
 static void poll_timer_cb(TimerHandle_t xTimer)
 {
-    ESP_LOGD(TAG, "Broadcasting CMD_POLL to all slaves");
+    (void)xTimer;
-    ;
-    // Optionally post event LINK_EVENT_MASTER_POLL_SENT
-}
 
-// --- Heartbeat timeout callback ---
+    uint8_t poll[] = {CMD_POLL};
-static void hb_timer_cb(TimerHandle_t xTimer)
+    bool ok = evse_link_send(0xFF, poll, sizeof(poll));
-{
+    ESP_LOGI(TAG, "POLL send ok=%d", ok);
-    ESP_LOGW(TAG, "Heartbeat timeout: possible slave offline");
-    // post event LINK_EVENT_SLAVE_OFFLINE ???
 }
 
 static void on_frame_master(uint8_t src, uint8_t dest,
                             const uint8_t *payload, uint8_t len)
 {
-    if (len < 1)
+    const uint8_t self = evse_link_get_self_id();
+
+    // ignora eco do próprio master e frames que não são para nós nem broadcast
+    if (src == self)
         return;
+    if (dest != self && dest != 0xFF)
+        return;
+
+    if (payload == NULL || len < 1)
+        return;
+
     uint8_t cmd = payload[0];
 
     switch (cmd)
     {
     case CMD_HEARTBEAT:
     {
+        ESP_LOGD(TAG, "HEARTBEAT from 0x%02X: %u bytes", src, len);
+
         if (len != LEN_HEARTBEAT)
-        { // CMD + charging + hw_max_lo + hw_max_hi + runtime_lo + runtime_hi
+        {
             ESP_LOGW(TAG, "HEARTBEAT len invalid from 0x%02X: %u bytes", src, len);
             return;
         }
-        bool charging = payload[1] != 0;
-        uint16_t hw_max = payload[2] | (payload[3] << 8);
-        uint16_t runtime = payload[4] | (payload[5] << 8);
 
-        ESP_LOGI(TAG, "Heartbeat from 0x%02X: charging=%d hw_max=%uA runtime=%uA",
+        bool charging = payload[1] != 0;
-                 src, charging, hw_max, runtime);
+        uint16_t hw_max = (uint16_t)(payload[2] | ((uint16_t)payload[3] << 8));
+        uint16_t runtime = (uint16_t)(payload[4] | ((uint16_t)payload[5] << 8));
+
+        mark_slave_seen(src);
 
         loadbalancer_slave_status_event_t status = {
             .slave_id = src,
             .charging = charging,
             .hw_max_current = (float)hw_max,
-            .runtime_current = (float)runtime, // corrente real medida no slave
+            .runtime_current = (float)runtime,
             .timestamp_us = esp_timer_get_time()};
 
-        esp_event_post(LOADBALANCER_EVENTS,
+        (void)esp_event_post(LOADBALANCER_EVENTS,
-                       LOADBALANCER_EVENT_SLAVE_STATUS,
+                             LOADBALANCER_EVENT_SLAVE_STATUS,
-                       &status, sizeof(status), portMAX_DELAY);
+                             &status, sizeof(status), portMAX_DELAY);
 
-        // Enviar ACK de volta
+        // ACK deferido e deduplicado
-        uint8_t ack[] = {CMD_HEARTBEAT_ACK};
+        enqueue_ack(src);
-        evse_link_send(src, ack, sizeof(ack));
-        ESP_LOGD(TAG, "Sent HEARTBEAT_ACK to 0x%02X", src);
         break;
     }
 
-    case CMD_POLL:
-        ESP_LOGD(TAG, "Received POLL_RESP from 0x%02X", src);
-        break;
-
     case CMD_CONFIG_BROADCAST:
-        ESP_LOGI(TAG, "Slave 0x%02X acked CONFIG_BROADCAST: new_max=%uA",
+        if (len >= LEN_CONFIG_BROADCAST)
-                 src, payload[1]);
+            ESP_LOGI(TAG, "Slave 0x%02X acked CONFIG_BROADCAST: new_max=%uA", src, payload[1]);
+        else
+            ESP_LOGW(TAG, "CONFIG_BROADCAST ack short len=%u from 0x%02X", len, src);
         break;
 
     default:
-        ESP_LOGW(TAG, "Unknown cmd 0x%02X from 0x%02X", cmd, src);
+        ESP_LOGD(TAG, "Cmd 0x%02X from 0x%02X (ignored/unknown)", cmd, src);
+        break;
     }
 }
 
-// --- Master initialization ---
 void evse_link_master_init(void)
 {
     if (evse_link_get_mode() != EVSE_LINK_MODE_MASTER || !evse_link_is_enabled())
-    {
         return;
-    }
+
     ESP_LOGI(TAG, "Initializing MASTER (ID=0x%02X)", evse_link_get_self_id());
 
-    // register frame callback
     evse_link_register_rx_cb(on_frame_master);
 
-    // register loadbalancer event
+    // Cria queue/task de ACK uma vez
-    ESP_ERROR_CHECK(
+    if (s_ack_q == NULL)
-        esp_event_handler_register(
+    {
+        s_ack_q = xQueueCreate(ACK_QUEUE_LEN, sizeof(uint8_t));
+        if (!s_ack_q)
+        {
+            ESP_LOGE(TAG, "Failed to create ACK queue");
+        }
+        else
+        {
+            if (xTaskCreate(ack_task, "evse_ack", 4096, NULL, 4, &s_ack_task) != pdPASS)
+            {
+                ESP_LOGE(TAG, "Failed to create ACK task");
+                vQueueDelete(s_ack_q);
+                s_ack_q = NULL;
+                s_ack_task = NULL;
+            }
+        }
+    }
+
+    if (!s_handlers_registered)
+    {
+        s_handlers_registered = true;
+
+        ESP_ERROR_CHECK(esp_event_handler_register(
             LOADBALANCER_EVENTS,
             LOADBALANCER_EVENT_SLAVE_CURRENT_LIMIT,
             on_new_limit,
             NULL));
 
-    // escutar resultado do AUTH para propagar autorização aos slaves
+        ESP_ERROR_CHECK(esp_event_handler_register(
-    ESP_ERROR_CHECK(
-        esp_event_handler_register(
             AUTH_EVENTS,
             AUTH_EVENT_TAG_PROCESSED,
             on_auth_result,
             NULL));
+    }
 
-    // create and start poll timer
+    if (poll_timer.timer == NULL)
-    poll_timer.timer = xTimerCreate("poll_tmr",
+    {
-                                    poll_timer.interval,
+        poll_timer.timer = xTimerCreate("poll_tmr",
-                                    pdTRUE, NULL,
+                                        poll_timer.interval,
-                                    poll_timer_cb);
+                                        pdTRUE, NULL,
-    xTimerStart(poll_timer.timer, 0);
+                                        poll_timer_cb);
+        if (poll_timer.timer)
+            (void)xTimerStart(poll_timer.timer, 0);
+    }
 
-    // create and start heartbeat monitor timer
+    if (s_presence_timer == NULL)
-    hb_timer.timer = xTimerCreate("hb_tmr",
+    {
-                                  hb_timer.interval,
+        s_presence_timer = xTimerCreate("presence_tmr",
-                                  pdFALSE, NULL,
+                                        pdMS_TO_TICKS(PRESENCE_CHECK_MS),
-                                  hb_timer_cb);
+                                        pdTRUE, NULL,
-    xTimerStart(hb_timer.timer, 0);
+                                        presence_timer_cb);
+        if (s_presence_timer)
+            (void)xTimerStart(s_presence_timer, 0);
+        else
+            ESP_LOGE(TAG, "Failed to create presence timer");
+    }
 }
-

components/evse_link/src/evse_link_slave.c

@@ -1,199 +1,441 @@
-// === components/evse_link/src/evse_link_slave.c ===
+// components/evse_link/src/evse_link_slave.c
+//
+// Correções aplicadas:
+// 1) Evitar TX dentro do callback RX: confirmação (heartbeat) é deferida via queue/task.
+// 2) Proteger safe_mode (e flags relacionadas) com mux (evita race entre RX e timer).
+// 3) Opção de política no fallback: por default faz PAUSE (mais seguro). Pode ser alterado por macro.
+// 4) Reduzir ruído de logs em caminho quente (RX frames em DEBUG).
+// 5) Manter semântica: só sai de safe_mode com comando explícito de potência (SET_CURRENT / RESUME).
+// 6) SET_CURRENT é delegado ao EVSE_Manager via LINK_EVENT_CURRENT_LIMIT_APPLIED.
+//    O evse_link_slave não mexe diretamente em autorização/runtime current.
+//
+// Nota: A enum do evse_state_event_data_t que enviaste está correta para o handler.
 
 #include "evse_link.h"
 #include "evse_link_events.h"
-#include "loadbalancer_events.h"
+
 #include "freertos/FreeRTOS.h"
 #include "freertos/task.h"
 #include "freertos/timers.h"
+#include "freertos/queue.h"
+#include "freertos/portmacro.h"
+
 #include "esp_log.h"
 #include "esp_event.h"
+#include "esp_random.h"
+#include "esp_err.h"
+
 #include "evse_events.h"
 #include "evse_state.h"
 #include "evse_config.h"
+
 #include <stdint.h>
 #include <stdbool.h>
 #include <string.h>
 
 static const char *TAG = "evse_link_slave";
 
-// Link commands
+#define MASTER_ID 0x01
-#define CMD_POLL               0x01
-#define CMD_HEARTBEAT          0x02  // not used by slave
-#define CMD_CONFIG_BROADCAST   0x03
-#define CMD_SET_CURRENT        0x08
-#define CMD_HEARTBEAT_ACK      0x09
-#define CMD_AUTH_GRANTED       0x0A  // novo: master concede autorização
 
-// payload lengths (exclui seq byte)
+// Commands (opcode no payload[0])
-#define LEN_POLL_REQ           1   // [ CMD_POLL ]
+#define CMD_POLL 0x01
-#define LEN_CONFIG_BROADCAST   2   // [ CMD_CONFIG_BROADCAST, new_max_current ]
+#define CMD_HEARTBEAT 0x02
-#define LEN_SET_CURRENT        3   // [ CMD_SET_CURRENT, limit_lo, limit_hi ]
+#define CMD_CONFIG_BROADCAST 0x03
-#define LEN_HEARTBEAT_ACK      1   // [ CMD_HEARTBEAT_ACK ]
+#define CMD_SET_CURRENT 0x08
-#define LEN_HEARTBEAT          6   // CMD_HEARTBEAT + charging + hw_max_lo + hw_max_hi + runtime_lo + runtime_hi
+#define CMD_HEARTBEAT_ACK 0x09
+#define CMD_AUTH_GRANTED 0x0A
+// #define CMD_RESUME         0x0B   // se existir
 
-// Timing
+// lengths (INCLUI opcode)
-#define FALLBACK_TIMEOUT_MS    120000
+#define LEN_SET_CURRENT 3
+
+#define FALLBACK_TIMEOUT_MS 180000
+
+// --- Política de fallback ---
+// 1 = mais seguro: PAUSE (revoga autorização)
+// 0 = força corrente mínima (pode continuar a carregar dependendo do core)
+#ifndef EVSE_LINK_FALLBACK_PAUSE
+#define EVSE_LINK_FALLBACK_PAUSE 1
+#endif
+
+// --- Confirmações via heartbeat (deferidas) ---
+#define HB_REQ_QUEUE_LEN 8
+
+typedef enum
+{
+    HB_REQ_SEND = 1,
+} hb_req_t;
 
 static TimerHandle_t fallback_timer = NULL;
-static bool          safe_mode = false;
+static TaskHandle_t hb_task_handle = NULL;
 
-// --- Helper to send a heartbeat frame ---
+// Task para enviar heartbeat sem bloquear RX callback
-static void send_heartbeat_frame(void) {
+static TaskHandle_t hb_sender_task_handle = NULL;
-    bool     charging = evse_state_is_charging(evse_get_state());
+static QueueHandle_t hb_req_q = NULL;
-    uint16_t hw_max   = evse_get_max_charging_current();
-    uint16_t runtime  = evse_get_runtime_charging_current();
 
-    ESP_LOGI(TAG, "Sending HEARTBEAT: charging=%d hw_max=%uA runtime=%uA",
+// "safe mode" (master offline): aplica fallback local e nao sai com POLL/ACK.
-             charging, hw_max, runtime);
+// Só sai com comando explícito de potência (SET_CURRENT / RESUME).
+static bool safe_mode = false;
+static uint16_t saved_runtime_limit = 0; // informativo
+
+static portMUX_TYPE s_state_mux = portMUX_INITIALIZER_UNLOCKED;
+
+static bool evse_handler_registered = false;
+
+static size_t bounded_strlen_u8(const uint8_t *s, size_t max_len)
+{
+    size_t i = 0;
+    if (!s)
+        return 0;
+    while (i < max_len && s[i] != 0)
+        i++;
+    return i;
+}
+
+static void send_heartbeat_frame_now(void)
+{
+    evse_state_t st = evse_get_state();
+
+    /*
+     * Para o master/loadbalancer, este campo significa "há pedido/demanda
+     * ativa deste conector", não apenas "relé ligado".
+     *
+     * C2/D2 => charging real
+     * C1/D1 => EV está a pedir carga, mas o relé está OFF por pausa/limite
+     *
+     * Isto permite retomar depois de SET_CURRENT=0: em C1 o slave continua
+     * elegível para o loadbalancer e o master pode voltar a enviar >0A.
+     */
+    bool demand = evse_state_is_charging(st) || evse_state_is_requesting(st);
+
+    uint16_t hw_max = evse_get_max_charging_current();
+    uint16_t runtime = evse_get_runtime_charging_current();
 
     uint8_t hb[] = {
         CMD_HEARTBEAT,
-        charging ? 1 : 0,
+        demand ? 1 : 0,
         (uint8_t)(hw_max & 0xFF), (uint8_t)(hw_max >> 8),
-        (uint8_t)(runtime & 0xFF), (uint8_t)(runtime >> 8)
+        (uint8_t)(runtime & 0xFF), (uint8_t)(runtime >> 8)};
-    };
+
-    // Broadcast to master (0xFF)
+    (void)evse_link_send(MASTER_ID, hb, sizeof(hb)); // UNICAST
-    evse_link_send(0xFF, hb, sizeof(hb));
+    ESP_LOGI(TAG, "Send Heartbeat Frame");
 }
 
+// pede heartbeat sem bloquear quem chama (RX callback, event handler, etc.)
+static void request_heartbeat_send(void)
+{
+    if (hb_req_q)
+    {
+        hb_req_t req = HB_REQ_SEND;
+        // não bloqueia; se encher, apenas ignora (heartbeat periódico já existe)
+        (void)xQueueSendToBack(hb_req_q, &req, 0);
+    }
+    else
+    {
+        // fallback: se queue ainda não existe, manda direto
+        send_heartbeat_frame_now();
+    }
+}
 
-// --- EVSE state change handler ---
+static void hb_sender_task(void *arg)
-static void evse_event_handler(void *arg, esp_event_base_t base, int32_t id, void *data) {
+{
-    if (base!=EVSE_EVENTS || id!=EVSE_EVENT_STATE_CHANGED || data==NULL) return;
+    (void)arg;
-    const evse_state_event_data_t *evt = data;
+
-    if (evt->state==EVSE_STATE_EVENT_IDLE || evt->state==EVSE_STATE_EVENT_CHARGING) {
+    hb_req_t req;
-        send_heartbeat_frame();
+    for (;;)
+    {
+        if (xQueueReceive(hb_req_q, &req, portMAX_DELAY) != pdTRUE)
+            continue;
+
+        if (req == HB_REQ_SEND)
+        {
+            send_heartbeat_frame_now();
+        }
+    }
+}
+
+static void evse_event_handler(void *arg, esp_event_base_t base, int32_t id, void *data)
+{
+    (void)arg;
+    if (base != EVSE_EVENTS || id != EVSE_EVENT_STATE_CHANGED || data == NULL)
+        return;
+
+    const evse_state_event_data_t *evt = (const evse_state_event_data_t *)data;
+
+    // Envia heartbeat quando entra em IDLE ou CHARGING (estado relevante)
+    if (evt->state == EVSE_STATE_EVENT_IDLE || evt->state == EVSE_STATE_EVENT_CHARGING)
+        request_heartbeat_send();
+}
+
+// Sai de safe-mode APENAS com comando explícito (SET_CURRENT / RESUME).
+static void maybe_exit_safe_mode_on_explicit_power_cmd(uint8_t cmd)
+{
+    bool in_safe;
+    portENTER_CRITICAL(&s_state_mux);
+    in_safe = safe_mode;
+    portEXIT_CRITICAL(&s_state_mux);
+
+    if (!in_safe)
+        return;
+
+    if (cmd == CMD_SET_CURRENT /*|| cmd == CMD_RESUME*/)
+    {
+        portENTER_CRITICAL(&s_state_mux);
+        safe_mode = false;
+        portEXIT_CRITICAL(&s_state_mux);
+
+        ESP_LOGI(TAG, "Exiting safe mode due to explicit cmd 0x%02X", cmd);
     }
 }
 
 static void on_frame_slave(uint8_t src, uint8_t dest,
-                           const uint8_t *payload, uint8_t len) {
+                           const uint8_t *payload, uint8_t len)
-    if (dest != evse_link_get_self_id() && dest != 0xFF) return;
+{
-    if (len < 1) return;
+    const uint8_t self = evse_link_get_self_id();
+
+    // Muito verboso em caminho quente; deixa em DEBUG
+    ESP_LOGD(TAG, "RX frames (src=0x%02X dest=0x%02X len=%u self=0x%02X)", src, dest, len, self);
+
+    if (src == self)
+        return;
+
+    if (dest != self && dest != 0xFF)
+        return;
+
+    if (payload == NULL || len < 1)
+    {
+        ESP_LOGW(TAG, "RX invalid: payload NULL or len<1 (len=%u)", len);
+        return;
+    }
+
+    // Só aceitar comandos do master
+    if (src != MASTER_ID)
+    {
+        ESP_LOGW(TAG, "RX ignore: non-master src=0x%02X", src);
+        return;
+    }
+
+    // Qualquer frame válido do master => link vivo (reset do fallback)
+    if (fallback_timer)
+        (void)xTimerReset(fallback_timer, 0);
 
     uint8_t cmd = payload[0];
-    switch (cmd) {
+
+    switch (cmd)
+    {
     case CMD_POLL:
-        ESP_LOGD(TAG, "Received CMD_POLL from master 0x%02X", src);
+        // Liveness only. Não sai de safe-mode e não restaura limites.
+        ESP_LOGI(TAG, "CMD_POLL from 0x%02X", src);
         break;
 
     case CMD_CONFIG_BROADCAST:
-        ESP_LOGD(TAG, "Received CMD_CONFIG_BROADCAST from master 0x%02X", src);
+        ESP_LOGI(TAG, "CMD_CONFIG_BROADCAST from 0x%02X", src);
         break;
 
-    case CMD_SET_CURRENT: {
+    case CMD_HEARTBEAT_ACK:
-        if (len < LEN_SET_CURRENT) {
+        ESP_LOGI(TAG, "HEARTBEAT_ACK from 0x%02X", src);
-            ESP_LOGW(TAG, "SET_CURRENT from 0x%02X with invalid length %u", src, len);
+        break;
+
+    case CMD_SET_CURRENT:
+    {
+        ESP_LOGI(TAG, "SET_CURRENT from 0x%02X", src);
+
+        if (len < LEN_SET_CURRENT)
+        {
+            ESP_LOGW(TAG, "SET_CURRENT invalid len=%u from 0x%02X", len, src);
             break;
         }
 
-        uint16_t amps = payload[1] | (payload[2] << 8);
+        uint16_t amps = (uint16_t)(payload[1] | ((uint16_t)payload[2] << 8));
-        evse_set_runtime_charging_current(amps);
+
-        ESP_LOGI(TAG, "Applied runtime limit: %uA from master 0x%02X", amps, src);
+        // Comando explícito => pode sair de safe-mode (mesmo se for pause)
-        esp_event_post(EVSE_LINK_EVENTS, LINK_EVENT_CURRENT_LIMIT_APPLIED,
+        maybe_exit_safe_mode_on_explicit_power_cmd(cmd);
-                       &amps, sizeof(amps), portMAX_DELAY);
+
+        if (amps == 0)
+        {
+            ESP_LOGI(TAG, "SET_CURRENT=0 => PAUSE requested by master");
+
+            request_heartbeat_send();
+
+            esp_event_post(EVSE_LINK_EVENTS,
+                           LINK_EVENT_CURRENT_LIMIT_APPLIED,
+                           &amps,
+                           sizeof(amps),
+                           portMAX_DELAY);
+            break;
+        }
+
+        // confirma sem bloquear RX
+        request_heartbeat_send();
+
+        ESP_LOGI(TAG, "Forwarding runtime limit: %uA from 0x%02X", (unsigned)amps, src);
+
+        (void)esp_event_post(EVSE_LINK_EVENTS, LINK_EVENT_CURRENT_LIMIT_APPLIED,
+                             &amps, sizeof(amps), portMAX_DELAY);
         break;
     }
 
-    case CMD_HEARTBEAT_ACK:
+    case CMD_AUTH_GRANTED:
-        ESP_LOGI(TAG, "Received HEARTBEAT_ACK from master 0x%02X", src);
+    {
-        if (fallback_timer) {
+        if (len < 2)
-            xTimerReset(fallback_timer, 0);
+        {
-            if (safe_mode) {
+            ESP_LOGW(TAG, "AUTH_GRANTED invalid len=%u from 0x%02X", len, src);
-                safe_mode = false;
-                uint16_t current = evse_get_runtime_charging_current();
-                evse_set_runtime_charging_current(current);
-                ESP_LOGI(TAG, "Exiting safe mode, restoring %uA", current);
-            }
-        }
-        break;
-
-    case CMD_AUTH_GRANTED: {
-        if (len < 2) {
-            ESP_LOGW(TAG, "CMD_AUTH_GRANTED from 0x%02X with invalid length %u", src, len);
             break;
         }
 
-        const char *tag = (const char *)&payload[1];
+        const uint8_t *tag_ptr = &payload[1];
+        size_t tag_buf_len = (size_t)(len - 1);
+        size_t tag_len = bounded_strlen_u8(tag_ptr, tag_buf_len);
 
         evse_link_auth_grant_event_t ev = {0};
-        strncpy(ev.tag, tag, EVSE_LINK_TAG_MAX_LEN - 1);
+        size_t copy_len = tag_len;
-        ev.tag[EVSE_LINK_TAG_MAX_LEN - 1] = '\0';
+        if (copy_len > (EVSE_LINK_TAG_MAX_LEN - 1))
+            copy_len = EVSE_LINK_TAG_MAX_LEN - 1;
 
-        ESP_LOGI(TAG, "Received CMD_AUTH_GRANTED from master 0x%02X, tag='%s'", src, ev.tag);
+        if (copy_len > 0)
+            memcpy(ev.tag, tag_ptr, copy_len);
+        ev.tag[copy_len] = '\0';
 
-        esp_err_t err = esp_event_post(
+        // AUTH_GRANTED não deve sair de safe-mode automaticamente
-            EVSE_LINK_EVENTS,
+        ESP_LOGI(TAG, "AUTH_GRANTED from 0x%02X tag='%s'", src, ev.tag);
-            LINK_EVENT_REMOTE_AUTH_GRANTED,
-            &ev,
-            sizeof(ev),
-            portMAX_DELAY);
 
-        if (err != ESP_OK) {
+        esp_err_t err = esp_event_post(EVSE_LINK_EVENTS,
+                                       LINK_EVENT_REMOTE_AUTH_GRANTED,
+                                       &ev, sizeof(ev),
+                                       portMAX_DELAY);
+        if (err != ESP_OK)
             ESP_LOGE(TAG, "Failed to post LINK_EVENT_REMOTE_AUTH_GRANTED: %s", esp_err_to_name(err));
-        }
         break;
     }
 
     default:
-        ESP_LOGW(TAG, "Unknown command 0x%02X from master 0x%02X", cmd, src);
+        ESP_LOGW(TAG, "Unknown cmd 0x%02X from 0x%02X", cmd, src);
+        break;
     }
 }
 
+static void slave_heartbeat_task(void *arg)
+{
+    (void)arg;
 
+    const uint32_t period_ms = 60000;
+    uint8_t id = evse_link_get_self_id();
 
-// --- Periodic heartbeat task ---
+    // desfasamento por ID: 2s, 4s, 6s...
-static void slave_heartbeat_task(void *arg) {
+    vTaskDelay(pdMS_TO_TICKS((uint32_t)id * 2000));
-    const TickType_t interval = pdMS_TO_TICKS(10000);
+
-    for (;;) {
+    for (;;)
-        send_heartbeat_frame();
+    {
-        vTaskDelay(interval);
+        request_heartbeat_send();
+
+        // jitter opcional
+        uint32_t jitter_ms = esp_random() % 201; // 0..200ms
+        vTaskDelay(pdMS_TO_TICKS(period_ms + jitter_ms));
     }
 }
 
-// --- Fallback safe mode callback ---
+static void fallback_timer_cb(TimerHandle_t xTimer)
-static void fallback_timer_cb(TimerHandle_t xTimer) {
+{
-    if (!safe_mode) {
+    (void)xTimer;
+
+    // entra safe_mode uma vez
+    bool already_safe;
+    portENTER_CRITICAL(&s_state_mux);
+    already_safe = safe_mode;
+    if (!safe_mode)
         safe_mode = true;
-        ESP_LOGW(TAG, "Fallback timeout: entering safe mode");
+    portEXIT_CRITICAL(&s_state_mux);
-        evse_set_runtime_charging_current(MIN_CHARGING_CURRENT_LIMIT);
+
-        esp_event_post(EVSE_LINK_EVENTS,
+    if (already_safe)
-                      LINK_EVENT_SLAVE_OFFLINE,
+        return;
-                      NULL, 0, portMAX_DELAY);
+
-    }
+    saved_runtime_limit = evse_get_runtime_charging_current();
+
+#if EVSE_LINK_FALLBACK_PAUSE
+    ESP_LOGW(TAG, "Fallback timeout: entering safe mode (saved %uA). Policy=PAUSE",
+             (unsigned)saved_runtime_limit);
+
+    // Pausar é mais seguro quando o master falha.
+    // O EVSE_Manager é o dono da autorização/pausa/retoma.
+    uint16_t zero_amps = 0;
+    (void)esp_event_post(EVSE_LINK_EVENTS,
+                         LINK_EVENT_CURRENT_LIMIT_APPLIED,
+                         &zero_amps,
+                         sizeof(zero_amps),
+                         portMAX_DELAY);
+#else
+    ESP_LOGW(TAG, "Fallback timeout: entering safe mode (saved %uA, forcing %uA). Policy=MIN",
+             (unsigned)saved_runtime_limit, (unsigned)MIN_CHARGING_CURRENT_LIMIT);
+
+    evse_set_runtime_charging_current(MIN_CHARGING_CURRENT_LIMIT);
+#endif
+
+    (void)esp_event_post(EVSE_LINK_EVENTS, LINK_EVENT_SLAVE_OFFLINE,
+                         NULL, 0, portMAX_DELAY);
+
+    // opcional: manda heartbeat para indicar estado atual
+    request_heartbeat_send();
 }
 
-// --- Slave initialization ---
+void evse_link_slave_init(void)
-void evse_link_slave_init(void) {
+{
-    if (evse_link_get_mode()!=EVSE_LINK_MODE_SLAVE || !evse_link_is_enabled()) return;
+    if (evse_link_get_mode() != EVSE_LINK_MODE_SLAVE || !evse_link_is_enabled())
+        return;
 
     ESP_LOGI(TAG, "Initializing SLAVE mode (ID=0x%02X)", evse_link_get_self_id());
 
-    // register frame callback
     evse_link_register_rx_cb(on_frame_slave);
 
-    // start periodic heartbeat
+    // cria queue/task do sender (para não mandar UART TX no callback RX)
-    xTaskCreate(slave_heartbeat_task, "slave_hb", 4096, NULL, 5, NULL);
+    if (hb_req_q == NULL)
-
+    {
-    // fallback timer
+        hb_req_q = xQueueCreate(HB_REQ_QUEUE_LEN, sizeof(hb_req_t));
-    fallback_timer = xTimerCreate("fallback_tmr",
+        if (!hb_req_q)
-                                  pdMS_TO_TICKS(FALLBACK_TIMEOUT_MS),
+        {
-                                  pdFALSE, NULL,
+            ESP_LOGE(TAG, "Failed to create HB request queue (fallback to direct send)");
-                                  fallback_timer_cb);
+        }
-    if (fallback_timer) {
+        else
-        xTimerStart(fallback_timer, 0);
+        {
+            if (xTaskCreate(hb_sender_task, "hb_sender", 3072, NULL, 3, &hb_sender_task_handle) != pdPASS)
+            {
+                ESP_LOGE(TAG, "Failed to create hb_sender task");
+                vQueueDelete(hb_req_q);
+                hb_req_q = NULL;
+                hb_sender_task_handle = NULL;
+            }
+        }
     }
 
-    // react to EVSE state changes
+    if (hb_task_handle == NULL)
-    ESP_ERROR_CHECK(
+    {
-        esp_event_handler_register(
+        if (xTaskCreate(slave_heartbeat_task, "slave_hb", 4096, NULL, 3, &hb_task_handle) != pdPASS)
-            EVSE_EVENTS,
+        {
-            EVSE_EVENT_STATE_CHANGED,
+            ESP_LOGE(TAG, "Failed to create slave_heartbeat_task");
-            evse_event_handler,
+            hb_task_handle = NULL;
-            NULL
+        }
-        )
+    }
-    );
-}
 
-// === Fim de: components/evse_link/src/evse_link_slave.c ===
+    if (fallback_timer == NULL)
+    {
+        fallback_timer = xTimerCreate("fallback_tmr",
+                                      pdMS_TO_TICKS(FALLBACK_TIMEOUT_MS),
+                                      pdFALSE, NULL,
+                                      fallback_timer_cb);
+        if (fallback_timer)
+            (void)xTimerStart(fallback_timer, 0);
+        else
+            ESP_LOGE(TAG, "Failed to create fallback timer");
+    }
+    else
+    {
+        (void)xTimerReset(fallback_timer, 0);
+    }
+
+    if (!evse_handler_registered)
+    {
+        ESP_ERROR_CHECK(esp_event_handler_register(
+            EVSE_EVENTS, EVSE_EVENT_STATE_CHANGED,
+            evse_event_handler, NULL));
+        evse_handler_registered = true;
+    }
+}

components/hmi_link/CMakeLists.txt

@@ -0,0 +1,10 @@
+set(srcs
+    "src/hmi_link.c"
+)
+
+idf_component_register(
+    SRCS ${srcs}
+    INCLUDE_DIRS "include"
+    REQUIRES evse
+    PRIV_REQUIRES driver esp_timer json
+)

components/hmi_link/include/hmi_link.h

@@ -0,0 +1,26 @@
+#ifndef HMI_LINK_H
+#define HMI_LINK_H
+
+#include "esp_err.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief Start the local HMI UART link.
+ *
+ * Default pins:
+ *   EVSE GPIO22 = TX -> LCD RX
+ *   EVSE GPIO21 = RX <- LCD TX
+ *   Baudrate    = 115200 8N1
+ *
+ * The link uses one JSON object per line ('\n').
+ */
+esp_err_t hmi_link_init(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif // HMI_LINK_H

components/hmi_link/src/hmi_link.c

@@ -0,0 +1,406 @@
+#include "hmi_link.h"
+
+#include <stdbool.h>
+#include <stdint.h>
+#include <stdio.h>
+#include <string.h>
+
+#include "cJSON.h"
+
+#include "driver/gpio.h"
+#include "driver/uart.h"
+#include "esp_err.h"
+#include "esp_log.h"
+#include "esp_timer.h"
+
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+
+#include "evse_api.h"
+#include "evse_config.h"
+#include "evse_error.h"
+#include "evse_meter.h"
+#include "evse_session.h"
+#include "evse_state.h"
+
+#ifndef HMI_LINK_UART_PORT
+#define HMI_LINK_UART_PORT UART_NUM_1
+#endif
+
+#ifndef HMI_LINK_UART_TX_GPIO
+#define HMI_LINK_UART_TX_GPIO GPIO_NUM_22
+#endif
+
+#ifndef HMI_LINK_UART_RX_GPIO
+#define HMI_LINK_UART_RX_GPIO GPIO_NUM_21
+#endif
+
+#ifndef HMI_LINK_UART_BAUDRATE
+#define HMI_LINK_UART_BAUDRATE 115200
+#endif
+
+#ifndef HMI_LINK_STATUS_PERIOD_MS
+#define HMI_LINK_STATUS_PERIOD_MS 1000
+#endif
+
+#define HMI_LINK_RX_BUF_SIZE 1024
+#define HMI_LINK_TX_BUF_SIZE 1024
+#define HMI_LINK_LINE_MAX    512
+#define HMI_LINK_JSON_MAX    896
+#define HMI_LINK_TASK_STACK  4096
+#define HMI_LINK_TASK_PRIO   5
+
+static const char *TAG = "hmi_link";
+
+static TaskHandle_t s_task = NULL;
+static uint32_t s_seq = 0;
+
+static void hmi_link_write_line(const char *line)
+{
+    if (!line)
+        return;
+
+    uart_write_bytes(HMI_LINK_UART_PORT, line, strlen(line));
+    uart_write_bytes(HMI_LINK_UART_PORT, "\n", 1);
+}
+
+static void hmi_link_send_ack(const char *cmd, bool ok, esp_err_t err)
+{
+    char out[192];
+    snprintf(out, sizeof(out),
+             "{\"type\":\"ack\",\"cmd\":\"%s\",\"ok\":%s,\"err\":\"%s\"}",
+             cmd ? cmd : "",
+             ok ? "true" : "false",
+             ok ? "OK" : esp_err_to_name(err));
+    hmi_link_write_line(out);
+}
+
+static void hmi_link_send_error(const char *reason)
+{
+    char out[192];
+    snprintf(out, sizeof(out),
+             "{\"type\":\"error\",\"reason\":\"%s\"}",
+             reason ? reason : "unknown");
+    hmi_link_write_line(out);
+}
+
+static bool json_bool_value(const cJSON *root, const char *name, bool *out)
+{
+    const cJSON *item = cJSON_GetObjectItemCaseSensitive(root, name);
+    if (cJSON_IsBool(item))
+    {
+        *out = cJSON_IsTrue(item);
+        return true;
+    }
+    return false;
+}
+
+static bool json_u16_value_any(const cJSON *root, uint16_t *out, const char *a, const char *b, const char *c)
+{
+    const char *names[3] = {a, b, c};
+    for (size_t i = 0; i < 3; ++i)
+    {
+        if (!names[i])
+            continue;
+
+        const cJSON *item = cJSON_GetObjectItemCaseSensitive(root, names[i]);
+        if (cJSON_IsNumber(item) && item->valuedouble >= 0.0 && item->valuedouble <= 65535.0)
+        {
+            *out = (uint16_t)item->valueint;
+            return true;
+        }
+    }
+    return false;
+}
+
+static void hmi_link_send_status(void)
+{
+    int power[EVSE_METER_PHASE_COUNT] = {0};
+    float voltage[EVSE_METER_PHASE_COUNT] = {0};
+    float current[EVSE_METER_PHASE_COUNT] = {0};
+    evse_session_t session = {0};
+    bool has_session = evse_get_session(&session);
+
+    evse_meter_get_power(power);
+    evse_meter_get_voltage(voltage);
+    evse_meter_get_current(current);
+
+    evse_state_t state = evse_get_state();
+    uint32_t error_bits = evse_get_error();
+    uint64_t uptime_ms = (uint64_t)(esp_timer_get_time() / 1000ULL);
+
+    char out[HMI_LINK_JSON_MAX];
+    snprintf(out, sizeof(out),
+             "{"
+             "\"type\":\"status\"," 
+             "\"seq\":%lu,"
+             "\"uptimeMs\":%llu,"
+             "\"state\":\"%s\","
+             "\"plugged\":%s,"
+             "\"charging\":%s,"
+             "\"enabled\":%s,"
+             "\"available\":%s,"
+             "\"authorized\":%s,"
+             "\"limitA\":%u,"
+             "\"runtimeA\":%u,"
+             "\"maxA\":%u,"
+             "\"tempLimitC\":%u,"
+             "\"powerW\":%d,"
+             "\"energyWh\":%d,"
+             "\"error\":%lu,"
+             "\"v\":[%.1f,%.1f,%.1f],"
+             "\"i\":[%.3f,%.3f,%.3f],"
+             "\"p\":[%d,%d,%d],"
+             "\"session\":{\"present\":%s,\"current\":%s,\"id\":%lu,\"durationS\":%lu,\"energyWh\":%lu,\"avgPowerW\":%lu}"
+             "}",
+             (unsigned long)++s_seq,
+             (unsigned long long)uptime_ms,
+             evse_state_to_str(state),
+             evse_state_is_plugged(state) ? "true" : "false",
+             evse_state_is_charging(state) ? "true" : "false",
+             evse_config_is_enabled() ? "true" : "false",
+             evse_config_is_available() ? "true" : "false",
+             evse_state_get_authorized() ? "true" : "false",
+             (unsigned)evse_get_charging_current(),
+             (unsigned)evse_get_runtime_charging_current(),
+             (unsigned)evse_get_max_charging_current(),
+             (unsigned)evse_get_temp_threshold(),
+             evse_meter_get_instant_power(),
+             evse_meter_get_total_energy(),
+             (unsigned long)error_bits,
+             voltage[0], voltage[1], voltage[2],
+             current[0], current[1], current[2],
+             power[0], power[1], power[2],
+             has_session ? "true" : "false",
+             (has_session && session.is_current) ? "true" : "false",
+             has_session ? (unsigned long)session.session_id : 0UL,
+             has_session ? (unsigned long)session.duration_s : 0UL,
+             has_session ? (unsigned long)session.energy_wh : 0UL,
+             has_session ? (unsigned long)session.avg_power_w : 0UL);
+
+    hmi_link_write_line(out);
+}
+
+static void hmi_link_handle_command(const char *line)
+{
+    cJSON *root = cJSON_Parse(line);
+    if (!root)
+    {
+        hmi_link_send_error("invalid_json");
+        return;
+    }
+
+    const cJSON *cmd_item = cJSON_GetObjectItemCaseSensitive(root, "cmd");
+    if (!cJSON_IsString(cmd_item) || cmd_item->valuestring == NULL)
+    {
+        cJSON_Delete(root);
+        hmi_link_send_error("missing_cmd");
+        return;
+    }
+
+    const char *cmd = cmd_item->valuestring;
+
+    if (strcmp(cmd, "get") == 0)
+    {
+        hmi_link_send_ack(cmd, true, ESP_OK);
+        hmi_link_send_status();
+    }
+    else if (strcmp(cmd, "ping") == 0)
+    {
+        char out[128];
+        snprintf(out, sizeof(out), "{\"type\":\"pong\",\"uptimeMs\":%llu}",
+                 (unsigned long long)(esp_timer_get_time() / 1000ULL));
+        hmi_link_write_line(out);
+    }
+    else if (strcmp(cmd, "set_current") == 0)
+    {
+        uint16_t amps = 0;
+        if (!json_u16_value_any(root, &amps, "a", "currentA", "limitA"))
+        {
+            hmi_link_send_ack(cmd, false, ESP_ERR_INVALID_ARG);
+        }
+        else
+        {
+            esp_err_t err = evse_set_charging_current(amps);
+            hmi_link_send_ack(cmd, err == ESP_OK, err);
+            if (err == ESP_OK)
+                hmi_link_send_status();
+        }
+    }
+    else if (strcmp(cmd, "set_temp_threshold") == 0)
+    {
+        uint16_t temp_c = 0;
+        if (!json_u16_value_any(root, &temp_c, "c", "tempC", "temperatureLimit"))
+        {
+            hmi_link_send_ack(cmd, false, ESP_ERR_INVALID_ARG);
+        }
+        else
+        {
+            esp_err_t err = evse_set_temp_threshold((uint8_t)temp_c);
+            hmi_link_send_ack(cmd, err == ESP_OK, err);
+            if (err == ESP_OK)
+                hmi_link_send_status();
+        }
+    }
+    else if (strcmp(cmd, "set_enabled") == 0)
+    {
+        bool enabled = false;
+        if (!json_bool_value(root, "enabled", &enabled))
+        {
+            hmi_link_send_ack(cmd, false, ESP_ERR_INVALID_ARG);
+        }
+        else
+        {
+            evse_set_enabled(enabled);
+            hmi_link_send_ack(cmd, true, ESP_OK);
+            hmi_link_send_status();
+        }
+    }
+    else if (strcmp(cmd, "set_available") == 0)
+    {
+        bool available = false;
+        if (!json_bool_value(root, "available", &available))
+        {
+            hmi_link_send_ack(cmd, false, ESP_ERR_INVALID_ARG);
+        }
+        else
+        {
+            evse_set_available(available);
+            hmi_link_send_ack(cmd, true, ESP_OK);
+            hmi_link_send_status();
+        }
+    }
+    else
+    {
+        hmi_link_send_ack(cmd, false, ESP_ERR_NOT_SUPPORTED);
+    }
+
+    cJSON_Delete(root);
+}
+
+static void hmi_link_task(void *arg)
+{
+    (void)arg;
+
+    char line[HMI_LINK_LINE_MAX];
+    size_t line_len = 0;
+    uint8_t rx[128];
+    TickType_t last_status = 0;
+
+    hmi_link_write_line("{\"type\":\"hello\",\"name\":\"hmi_link\",\"version\":1}");
+    hmi_link_send_status();
+    last_status = xTaskGetTickCount();
+
+    while (true)
+    {
+        int n = uart_read_bytes(HMI_LINK_UART_PORT, rx, sizeof(rx), pdMS_TO_TICKS(100));
+        for (int i = 0; i < n; ++i)
+        {
+            uint8_t ch = rx[i];
+
+            if (ch == '\r')
+                continue;
+
+            if (ch == '\n')
+            {
+                if (line_len > 0)
+                {
+                    line[line_len] = '\0';
+                    hmi_link_handle_command(line);
+                    line_len = 0;
+                }
+                continue;
+            }
+
+            if (line_len < (sizeof(line) - 1))
+            {
+                line[line_len++] = (char)ch;
+            }
+            else
+            {
+                line_len = 0;
+                hmi_link_send_error("line_too_long");
+            }
+        }
+
+        TickType_t now = xTaskGetTickCount();
+        if ((now - last_status) >= pdMS_TO_TICKS(HMI_LINK_STATUS_PERIOD_MS))
+        {
+            hmi_link_send_status();
+            last_status = now;
+        }
+    }
+}
+
+esp_err_t hmi_link_init(void)
+{
+    if (s_task != NULL)
+    {
+        ESP_LOGW(TAG, "Already started");
+        return ESP_OK;
+    }
+
+    const uart_config_t uart_config = {
+        .baud_rate = HMI_LINK_UART_BAUDRATE,
+        .data_bits = UART_DATA_8_BITS,
+        .parity = UART_PARITY_DISABLE,
+        .stop_bits = UART_STOP_BITS_1,
+        .flow_ctrl = UART_HW_FLOWCTRL_DISABLE,
+        .source_clk = UART_SCLK_DEFAULT,
+    };
+
+    esp_err_t err = uart_driver_install(HMI_LINK_UART_PORT,
+                                        HMI_LINK_RX_BUF_SIZE,
+                                        HMI_LINK_TX_BUF_SIZE,
+                                        0,
+                                        NULL,
+                                        0);
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "uart_driver_install failed: %s", esp_err_to_name(err));
+        return err;
+    }
+
+    err = uart_param_config(HMI_LINK_UART_PORT, &uart_config);
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "uart_param_config failed: %s", esp_err_to_name(err));
+        uart_driver_delete(HMI_LINK_UART_PORT);
+        return err;
+    }
+
+    err = uart_set_pin(HMI_LINK_UART_PORT,
+                       HMI_LINK_UART_TX_GPIO,
+                       HMI_LINK_UART_RX_GPIO,
+                       UART_PIN_NO_CHANGE,
+                       UART_PIN_NO_CHANGE);
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "uart_set_pin failed: %s", esp_err_to_name(err));
+        uart_driver_delete(HMI_LINK_UART_PORT);
+        return err;
+    }
+
+    BaseType_t ok = xTaskCreate(hmi_link_task,
+                                "hmi_link",
+                                HMI_LINK_TASK_STACK,
+                                NULL,
+                                HMI_LINK_TASK_PRIO,
+                                &s_task);
+    if (ok != pdPASS)
+    {
+        ESP_LOGE(TAG, "xTaskCreate failed");
+        s_task = NULL;
+        uart_driver_delete(HMI_LINK_UART_PORT);
+        return ESP_ERR_NO_MEM;
+    }
+
+    ESP_LOGI(TAG,
+             "Started: UART%d, TX GPIO%d, RX GPIO%d, %d baud",
+             (int)HMI_LINK_UART_PORT,
+             (int)HMI_LINK_UART_TX_GPIO,
+             (int)HMI_LINK_UART_RX_GPIO,
+             (int)HMI_LINK_UART_BAUDRATE);
+
+    return ESP_OK;
+}

components/led/src/led.c

@@ -13,7 +13,7 @@
 #include "evse_state.h"
 #include "ledc_driver.h"
 
-#define BLOCK_TIME pdMS_TO_TICKS(10)
+#define BLOCK_TIME portMAX_DELAY
 
 static const char *TAG = "led";
 
@@ -350,7 +350,7 @@ static void evse_led_event_handler(void *arg, esp_event_base_t base, int32_t id,
 
     const evse_state_event_data_t *evt = (const evse_state_event_data_t *)data;
 
-    ESP_LOGI(TAG, "EVSE State Changed: state=%d", evt->state);
+    ESP_LOGD(TAG, "EVSE State Changed: state=%d", evt->state);
 
     // Atualiza o estado base
     current_state_mode = evt->state;
@@ -378,7 +378,7 @@ static void evse_session_led_event_handler(void *arg, esp_event_base_t base, int
     const evse_session_event_data_t *evt =
         (const evse_session_event_data_t *)data;
 
-    ESP_LOGI(TAG,
+    ESP_LOGD(TAG,
              "EVSE Session Event: type=%d, id=%" PRIu32
              ", duration=%" PRIu32 " s, energy=%" PRIu32 " Wh, avg=%" PRIu32 " W, current=%d",
              (int)evt->type,

components/loadbalancer/CMakeLists.txt

@@ -1,8 +1,7 @@
 set(srcs
-    "src/input_filter.c" "src/loadbalancer.c" "src/loadbalancer_events.c"
+    "src/input_filter.c" "src/loadbalancer.c" "src/pv_optimizer.c" "src/grid_limiter.c" "src/loadbalancer_events.c"
 )
 
 idf_component_register(SRCS "${srcs}"
                       INCLUDE_DIRS "include"
-                      PRIV_REQUIRES nvs_flash
                       REQUIRES esp_event esp_timer meter_manager evse)

components/loadbalancer/include/grid_limiter.h

@@ -0,0 +1,42 @@
+#ifndef GRID_LIMITER_H_
+#define GRID_LIMITER_H_
+
+#ifdef __cplusplus
+extern "C"
+{
+#endif
+
+#include <stdbool.h>
+#include <stdint.h>
+#include "esp_err.h"
+#include "meter_events.h"
+
+    void grid_limiter_init(void);
+
+    void grid_limiter_set_enabled(bool en);
+    bool grid_limiter_is_enabled(void);
+
+    esp_err_t grid_limiter_set_max_import_a(uint8_t a);
+    uint8_t grid_limiter_get_max_import_a(void);
+
+    /**
+     * @brief Calcula um novo "total_budget_a" (<= current_total_a) para respeitar max_import_a.
+     *
+     * Preferência:
+     *  - Usa watt_total (+import / -export) se existir
+     *  - Caso watt_total==0, usa fallback_grid_current_a (magnitude)
+     *
+     * @param grid_evt                último evento do GRID
+     * @param fallback_grid_current_a corrente filtrada (magnitude) como fallback
+     * @param current_total_a         total atual a atribuir aos EVSE (A)
+     * @return total_budget_a (<= current_total_a)
+     */
+    float grid_limiter_limit_total_a(const meter_event_data_t *grid_evt,
+                                     float fallback_grid_current_a,
+                                     float current_total_a);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* GRID_LIMITER_H_ */

components/loadbalancer/include/loadbalancer.h

@@ -9,36 +9,47 @@ extern "C" {
 #include <stdint.h>
 #include "esp_err.h"
 
-
 /**
- * @brief Inicializa o módulo de load balancer
+ * @brief Operational current limiting mode.
+ *
+ * This is owned by the loadbalancer/policy layer. MQTT/REST should only
+ * request a mode change; they should not persist or re-apply their own mode.
  */
+typedef enum
+{
+    LOADBALANCER_LIMIT_MODE_OFF = 0,
+    LOADBALANCER_LIMIT_MODE_MANUAL,
+    LOADBALANCER_LIMIT_MODE_GRID,
+    LOADBALANCER_LIMIT_MODE_SOLAR,
+    LOADBALANCER_LIMIT_MODE_GRID_SOLAR
+} loadbalancer_limit_mode_t;
+
 void loadbalancer_init(void);
 
-/**
+void loadbalancer_set_enabled(bool enabled);
- * @brief Task contínua do algoritmo de balanceamento
- */
-void loadbalancer_task(void *param);
-
-/**
- * @brief Ativa ou desativa o load balancing
- */
-void loadbalancer_set_enabled(bool value);
-
-/**
- * @brief Verifica se o load balancing está ativo
- */
 bool loadbalancer_is_enabled(void);
 
-/**
+// Operational limit mode
- * @brief Define a corrente máxima do grid
+esp_err_t loadbalancer_set_limit_mode(loadbalancer_limit_mode_t mode);
- */
+loadbalancer_limit_mode_t loadbalancer_get_limit_mode(void);
-esp_err_t load_balancing_set_max_grid_current(uint8_t max_grid_current);
+const char *loadbalancer_limit_mode_to_str(loadbalancer_limit_mode_t mode);
+bool loadbalancer_limit_mode_from_str(const char *str, loadbalancer_limit_mode_t *out);
 
-/**
+// GRID limit (A)
- * @brief Obtém a corrente máxima do grid
+void     loadbalancer_grid_set_enabled(bool en);
- */
+bool     loadbalancer_grid_is_enabled(void);
-uint8_t load_balancing_get_max_grid_current(void);
+esp_err_t loadbalancer_grid_set_max_import_a(uint8_t a);
+uint8_t  loadbalancer_grid_get_max_import_a(void);
+
+// PV optimizer (W)
+void     loadbalancer_pv_set_enabled(bool en);
+bool     loadbalancer_pv_is_enabled(void);
+esp_err_t loadbalancer_pv_set_max_import_w(int32_t w);
+int32_t  loadbalancer_pv_get_max_import_w(void);
+
+// Aliases legacy (se quiseres manter chamadas antigas)
+esp_err_t load_balancing_set_max_grid_current(uint8_t value);
+uint8_t  load_balancing_get_max_grid_current(void);
 
 #ifdef __cplusplus
 }

components/loadbalancer/include/loadbalancer_events.h

@@ -1,47 +1,70 @@
+// components/loadbalancer/include/loadbalancer_events.h
 #pragma once
+
 #include "esp_event.h"
-#include <stdint.h>
+
 #include <stdbool.h>
-#include "esp_timer.h"
+#include <stdint.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
 
 ESP_EVENT_DECLARE_BASE(LOADBALANCER_EVENTS);
 
-typedef enum {
+typedef enum
-    LOADBALANCER_EVENT_INIT,
+{
+    LOADBALANCER_EVENT_INIT = 0,
     LOADBALANCER_EVENT_STATE_CHANGED,
-    LOADBALANCER_EVENT_GLOBAL_CURRENT_LIMIT,
+
+    /*
+     * Current limit events.
+     *
+     * MASTER and SLAVE use different payloads intentionally.
+     */
     LOADBALANCER_EVENT_MASTER_CURRENT_LIMIT,
     LOADBALANCER_EVENT_SLAVE_CURRENT_LIMIT,
+
+    /*
+     * Status received from slave connectors.
+     */
     LOADBALANCER_EVENT_SLAVE_STATUS
 } loadbalancer_event_id_t;
 
-typedef struct {
+typedef struct
-    bool     enabled;
+{
-    int64_t  timestamp_us;
+    bool enabled;
+    int64_t timestamp_us;
 } loadbalancer_state_event_t;
 
-// (opcional)
+/*
-typedef struct {
+ * MASTER: no slave_id.
-    float    limit;
+ */
-    int64_t  timestamp_us;
+typedef struct
-} loadbalancer_global_limit_event_t;
+{
-
-typedef struct {
-    uint8_t  slave_id;
     uint16_t max_current;
-    int64_t  timestamp_us;
+    int64_t timestamp_us;
 } loadbalancer_master_limit_event_t;
 
-typedef struct {
+/*
-    uint8_t  slave_id;
+ * SLAVE: includes slave_id.
+ */
+typedef struct
+{
+    uint8_t slave_id;
     uint16_t max_current;
-    int64_t  timestamp_us;
+    int64_t timestamp_us;
 } loadbalancer_slave_limit_event_t;
 
-typedef struct {
+typedef struct
-    uint8_t  slave_id;         // ID do slave que reportou
+{
-    bool     charging;         // Status de carregamento
+    uint8_t slave_id;
-    float    hw_max_current;   // Limite máximo de corrente do hardware informado
+    bool charging;
-    float    runtime_current;  // Corrente atual de carregamento (A)
+    float hw_max_current;
-    int64_t  timestamp_us;     // Momento em que o status foi coletado
+    float runtime_current;
-} loadbalancer_slave_status_event_t;
+    int64_t timestamp_us;
+} loadbalancer_slave_status_event_t;
+
+#ifdef __cplusplus
+}
+#endif

components/loadbalancer/include/pv_optimizer.h

@@ -0,0 +1,40 @@
+#ifndef PV_OPTIMIZER_H_
+#define PV_OPTIMIZER_H_
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdbool.h>
+#include <stdint.h>
+#include "esp_err.h"
+#include "meter_events.h"
+
+void     pv_optimizer_init(void);
+
+void     pv_optimizer_set_enabled(bool en);
+bool     pv_optimizer_is_enabled(void);
+
+esp_err_t pv_optimizer_set_max_import_w(int32_t w);
+int32_t  pv_optimizer_get_max_import_w(void);
+
+/**
+ * @brief Calcula o budget TOTAL (A) para todos os EVSEs, para manter importação <= max_import_w.
+ *
+ * - max_import_w = 0  => modo "Só PV": tenta manter importação ~0 (só consome quando há exportação).
+ * - max_import_w > 0  => modo "PV-Grid": permite importar até esse valor.
+ *
+ * @param grid_evt               Último evento do medidor GRID (watt_total assinado).
+ * @param last_total_cmd_a       Soma da corrente comandada no ciclo anterior (A).
+ * @param total_hw_max_a         Soma dos hw_max_current dos conectores ativos (A).
+ * @return budget_total_a (0..total_hw_max_a)
+ */
+float pv_optimizer_compute_budget_a(const meter_event_data_t *grid_evt,
+                                   float last_total_cmd_a,
+                                   float total_hw_max_a);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* PV_OPTIMIZER_H_ */

components/loadbalancer/src/grid_limiter.c

@@ -0,0 +1,123 @@
+#include "grid_limiter.h"
+#include "esp_log.h"
+#include <math.h>
+
+static const char *TAG = "grid_limiter";
+
+#define DEFAULT_VOLTAGE_V (230.0f)
+
+typedef struct
+{
+    bool enabled;
+    uint8_t max_import_a;
+} grid_cfg_t;
+
+static grid_cfg_t s_cfg = {
+    .enabled = false,
+    .max_import_a = 32};
+
+static float clamp_pf(float pf)
+{
+    if (pf < 0.05f || pf > 1.2f)
+        return 1.0f;
+    return pf;
+}
+
+static void estimate_v_and_phases(const meter_event_data_t *m, float *v_avg, int *nph)
+{
+    float sum = 0.0f;
+    int cnt = 0;
+
+    if (!m)
+    {
+        *v_avg = DEFAULT_VOLTAGE_V;
+        *nph = 1;
+        return;
+    }
+
+    for (int i = 0; i < 3; i++)
+    {
+        if (m->vrms[i] > 80.0f)
+        {
+            sum += m->vrms[i];
+            cnt++;
+        }
+    }
+
+    if (cnt == 0)
+    {
+        *v_avg = DEFAULT_VOLTAGE_V;
+        *nph = 1;
+        return;
+    }
+
+    *v_avg = sum / (float)cnt;
+    *nph = cnt;
+}
+
+void grid_limiter_init(void) { /* nada */ }
+
+void grid_limiter_set_enabled(bool en) { s_cfg.enabled = en; }
+bool grid_limiter_is_enabled(void) { return s_cfg.enabled; }
+
+esp_err_t grid_limiter_set_max_import_a(uint8_t a)
+{
+    if (a < 6 || a > 100)
+        return ESP_ERR_INVALID_ARG;
+    s_cfg.max_import_a = a;
+    return ESP_OK;
+}
+
+uint8_t grid_limiter_get_max_import_a(void) { return s_cfg.max_import_a; }
+
+float grid_limiter_limit_total_a(const meter_event_data_t *grid_evt,
+                                 float fallback_grid_current_a,
+                                 float current_total_a)
+{
+    if (!s_cfg.enabled)
+        return current_total_a;
+    if (current_total_a <= 0.0f)
+        return 0.0f;
+
+    float i_import = 0.0f;
+
+    if (grid_evt && grid_evt->watt_total > 0)
+    {
+        float v_avg;
+        int nph;
+        estimate_v_and_phases(grid_evt, &v_avg, &nph);
+        const float pf = clamp_pf(grid_evt->power_factor);
+        const float denom = v_avg * (float)nph * pf;
+
+        if (denom > 10.0f)
+        {
+            i_import = ((float)grid_evt->watt_total) / denom;
+        }
+        else
+        {
+            i_import = fallback_grid_current_a;
+        }
+    }
+    else
+    {
+        // export (<=0) => import=0; ou sem potência => fallback
+        if (grid_evt && grid_evt->watt_total < 0)
+            i_import = 0.0f;
+        else
+            i_import = fallback_grid_current_a;
+    }
+
+    if (i_import <= (float)s_cfg.max_import_a + 0.01f)
+        return current_total_a;
+
+    const float over = i_import - (float)s_cfg.max_import_a;
+    const float cut_a = ceilf(over); // conservador
+    float new_total = current_total_a - cut_a;
+    if (new_total < 0.0f)
+        new_total = 0.0f;
+
+    ESP_LOGD(TAG, "cap: i_import=%.2fA max=%uA over=%.2fA total=%.1fA -> %.1fA",
+             i_import, (unsigned)s_cfg.max_import_a, over, current_total_a, new_total);
+
+    return new_total;
+}

components/loadbalancer/src/pv_optimizer.c

@@ -0,0 +1,165 @@
+#include "pv_optimizer.h"
+#include "esp_log.h"
+#include <math.h>
+
+static const char *TAG = "pv_optimizer";
+
+// internos (fixos, como pediste)
+#define PV_MIN_EXPORT_W (50)        // deadband export (anti-oscilações)
+#define PV_TOTAL_RAMP_STEP_A (2.0f) // step total por ciclo (como tens loop 5s)
+#define DEFAULT_VOLTAGE_V (230.0f)
+
+typedef struct
+{
+    bool enabled;
+    int32_t max_import_w; // >=0
+} pv_cfg_t;
+
+static pv_cfg_t s_cfg = {
+    .enabled = false,
+    .max_import_w = 0};
+
+static float clamp_pf(float pf)
+{
+    if (pf < 0.05f || pf > 1.2f)
+        return 1.0f;
+    return pf;
+}
+
+static void estimate_v_and_phases(const meter_event_data_t *m, float *v_avg, int *nph)
+{
+    float sum = 0.0f;
+    int cnt = 0;
+
+    if (!m)
+    {
+        *v_avg = DEFAULT_VOLTAGE_V;
+        *nph = 1;
+        return;
+    }
+
+    for (int i = 0; i < 3; i++)
+    {
+        if (m->vrms[i] > 80.0f)
+        {
+            sum += m->vrms[i];
+            cnt++;
+        }
+    }
+
+    if (cnt == 0)
+    {
+        *v_avg = DEFAULT_VOLTAGE_V;
+        *nph = 1;
+        return;
+    }
+
+    *v_avg = sum / (float)cnt;
+    *nph = cnt;
+}
+
+void pv_optimizer_init(void)
+{
+    // nada a fazer
+}
+
+void pv_optimizer_set_enabled(bool en) { s_cfg.enabled = en; }
+bool pv_optimizer_is_enabled(void) { return s_cfg.enabled; }
+
+esp_err_t pv_optimizer_set_max_import_w(int32_t w)
+{
+    if (w < 0)
+        return ESP_ERR_INVALID_ARG;
+    s_cfg.max_import_w = w;
+    return ESP_OK;
+}
+
+int32_t pv_optimizer_get_max_import_w(void) { return s_cfg.max_import_w; }
+
+static float ramp_total(float last_a, float target_a)
+{
+    if (target_a > last_a + PV_TOTAL_RAMP_STEP_A)
+        return last_a + PV_TOTAL_RAMP_STEP_A;
+    if (target_a < last_a - PV_TOTAL_RAMP_STEP_A)
+        return last_a - PV_TOTAL_RAMP_STEP_A;
+    return target_a;
+}
+
+float pv_optimizer_compute_budget_a(const meter_event_data_t *grid_evt,
+                                    float last_total_cmd_a,
+                                    float total_hw_max_a)
+{
+    if (!s_cfg.enabled)
+        return total_hw_max_a;
+    if (!grid_evt)
+        return 0.0f;
+
+    // se meter não fornece potência (fica 0) não dá para PV -> conservador: não importa
+    // (podes mudar para "mantém last" se preferires)
+    if (grid_evt->watt_total == 0)
+    {
+        return ramp_total(last_total_cmd_a, 0.0f);
+    }
+
+    float v_avg;
+    int nph;
+    estimate_v_and_phases(grid_evt, &v_avg, &nph);
+
+    const float pf = clamp_pf(grid_evt->power_factor);
+    const float w_per_a = v_avg * (float)nph * pf;
+    if (w_per_a < 10.0f)
+    {
+        return ramp_total(last_total_cmd_a, 0.0f);
+    }
+
+    const int32_t p_grid_w = grid_evt->watt_total;      // +import / -export
+    const int32_t target_import_w = s_cfg.max_import_w; // >=0
+
+    // deadband só para o "Só PV"
+    if (target_import_w == 0)
+    {
+        if (p_grid_w < 0)
+        {
+            int32_t export_w = -p_grid_w;
+            if (export_w < PV_MIN_EXPORT_W)
+            {
+                return ramp_total(last_total_cmd_a, 0.0f);
+            }
+        }
+        else
+        {
+            // está a importar
+            if (p_grid_w < PV_MIN_EXPORT_W)
+            {
+                return ramp_total(last_total_cmd_a, 0.0f);
+            }
+        }
+    }
+
+    // estima base-load com o comando anterior
+    const float p_evse_last_w = last_total_cmd_a * w_per_a;
+    const float p_base_w = (float)p_grid_w - p_evse_last_w;
+
+    // queremos p_grid -> target_import_w
+    float p_evse_target_w = (float)target_import_w - p_base_w;
+
+    // clamp [0..max]
+    if (p_evse_target_w < 0.0f)
+        p_evse_target_w = 0.0f;
+    const float p_evse_max_w = total_hw_max_a * w_per_a;
+    if (p_evse_target_w > p_evse_max_w)
+        p_evse_target_w = p_evse_max_w;
+
+    float target_total_a = p_evse_target_w / w_per_a;
+    if (target_total_a < 0.0f)
+        target_total_a = 0.0f;
+    if (target_total_a > total_hw_max_a)
+        target_total_a = total_hw_max_a;
+
+    float ramped = ramp_total(last_total_cmd_a, target_total_a);
+
+    ESP_LOGD(TAG, "pv: p_grid=%ldW target_imp=%ldW base=%.1fW last=%.1fA -> target=%.1fA (v=%.1f nph=%d pf=%.2f)",
+             (long)p_grid_w, (long)target_import_w, p_base_w, last_total_cmd_a, ramped, v_avg, nph, pf);
+
+    return ramped;
+}

components/logger/CMakeLists.txt

@@ -1,7 +0,0 @@
-set(srcs
-    "src/logger.c"
-    "src/output_buffer.c"
-    )
-
-idf_component_register(SRCS "${srcs}"
-                    INCLUDE_DIRS "include")

components/logger/include/logger.h

@@ -1,58 +0,0 @@
-#ifndef LOGGER_H_
-#define LOGGER_H_
-
-#include <stdint.h>
-#include <stdbool.h>
-#include "freertos/FreeRTOS.h"
-#include "freertos/event_groups.h"
-
-#define LOGGER_SERIAL_BIT       BIT0
-
-/**
- * @brief Logger event group LOGGER_SERIAL_BIT
- * 
- */
-extern EventGroupHandle_t logger_event_group;
-
-/**
- * @brief Initialize logger
- * 
- */
-void logger_init(void);
-
-/**
- * @brief Print
- * 
- * @param str 
- */
-void logger_print(const char* str);
-
-/**
- * @brief Print va
- * 
- * @param str 
- * @param l 
- * @return int 
- */
-int logger_vprintf(const char* str, va_list l);
-
-/**
- * @brief Get entries count
- * 
- * @return uint16_t 
- */
-uint16_t logger_count(void);
-
-/**
- * @brief Read line from index, set index for reading next entry
- * 
- * @param index 
- * @param str 
- * @param v 
- * @return true When has next entry
- * @return false When no entry left
- */
-bool logger_read(uint16_t *index, char **str, uint16_t* len);
-
-
-#endif /* LOGGER_H_ */

components/logger/include/output_buffer.h

@@ -1,24 +0,0 @@
-#ifndef OUTPUT_BUFFER_H_
-#define OUTPUT_BUFFER_H_
-
-#include <stdint.h>
-#include <stdbool.h>
-
-typedef struct {
-    uint16_t size;
-    uint16_t count;    
-    uint8_t* data;    
-    uint8_t* append;
-} output_buffer_t;
-
-output_buffer_t* output_buffer_create(uint16_t size);
-
-void output_buffer_delete(output_buffer_t* buffer);
-
-void output_buffer_append_buf(output_buffer_t* buffer, const char* buf, uint16_t len);
-
-void output_buffer_append_str(output_buffer_t* buffer, const char* str);
-
-bool output_buffer_read(output_buffer_t* buffer, uint16_t *index, char **str, uint16_t* len);
-
-#endif /* OUTPUT_BUFFER_H_ */

components/logger/src/logger.c

@@ -1,71 +0,0 @@
-#include <stdio.h>
-#include <memory.h>
-#include <sys/param.h>
-#include "freertos/FreeRTOS.h"
-#include "freertos/semphr.h"
-
-#include "logger.h"
-#include "output_buffer.h"
-
-#define LOG_BUFFER_SIZE     6096 //4096
-#define MAX_LOG_SIZE        512
-
-
-static SemaphoreHandle_t mutex;
-
-static output_buffer_t * buffer = NULL;
-
-EventGroupHandle_t logger_event_group = NULL;
-
-void logger_init(void)
-{
-    mutex = xSemaphoreCreateMutex();
-    logger_event_group = xEventGroupCreate();
-
-    buffer = output_buffer_create(LOG_BUFFER_SIZE);
-}
-
-uint16_t logger_count(void)
-{
-    return buffer->count;
-}
-
-void logger_print(const char* str)
-{
-    xSemaphoreTake(mutex, portMAX_DELAY);
-
-    output_buffer_append_str(buffer, str);
-    xEventGroupSetBits(logger_event_group, 0xFF);
-  
-    xSemaphoreGive(mutex);
-}
-
-int logger_vprintf(const char* str, va_list l)
-{
-#ifdef CONFIG_ESP_CONSOLE_UART
-    vprintf(str, l);
-#endif
-
-    xSemaphoreTake(mutex, portMAX_DELAY);
-
-    static char log[MAX_LOG_SIZE];
-    int len = vsnprintf(log, MAX_LOG_SIZE, str, l);
-
-    output_buffer_append_buf(buffer, log, len);
-    xEventGroupSetBits(logger_event_group, 0xFF);
-
-    xSemaphoreGive(mutex);
-
-    return len;
-}
-
-bool logger_read(uint16_t* index, char** str, uint16_t* len)
-{
-    xSemaphoreTake(mutex, portMAX_DELAY);
-
-    bool has_next = output_buffer_read(buffer, index, str, len);
-
-    xSemaphoreGive(mutex);
-
-    return has_next;
-}

components/logger/src/output_buffer.c

@@ -1,86 +0,0 @@
-#include <memory.h>
-
-#include "output_buffer.h"
-
-
-output_buffer_t* output_buffer_create(uint16_t size)
-{
-    output_buffer_t* buffer = (output_buffer_t*)malloc(sizeof(output_buffer_t));
-
-    buffer->size = size;
-    buffer->count = 0;
-    buffer->data = (uint8_t*)malloc(sizeof(uint8_t) * size);
-    buffer->append = buffer->data;
-
-    return buffer;
-}
-
-void output_buffer_delete(output_buffer_t* buffer)
-{
-    free((void*)buffer->data);
-    free((void*)buffer);
-}
-
-void output_buffer_append_buf(output_buffer_t* buffer, const char* str, uint16_t len)
-{
-    if (((buffer->append - buffer->data) + sizeof(uint16_t) + len) >= buffer->size) {
-        //rotate buffer
-        uint8_t* pos = buffer->data;
-        uint16_t rotate_count = 0;
-        while ((pos - buffer->data) < buffer->size / 2) {
-            //seek first half
-            uint16_t entry_len;
-            memcpy((void*)&entry_len, (void*)pos, sizeof(uint16_t));
-            pos += entry_len + sizeof(uint16_t);
-            rotate_count++;
-        }
-
-        memmove((void*)buffer->data, (void*)pos, buffer->size - (pos - buffer->data));
-        buffer->count -= rotate_count;
-        buffer->append -= (pos - buffer->data);
-    }
-
-    memcpy((void*)buffer->append, (void*)&len, sizeof(uint16_t));
-    buffer->append += sizeof(uint16_t);
-
-    memcpy((void*)buffer->append, (void*)str, len);
-    buffer->append += len;
-
-    buffer->count++;
-}
-
-void output_buffer_append_str(output_buffer_t* buffer, const char* str)
-{
-    output_buffer_append_buf(buffer, str, strlen(str));
-}
-
-bool output_buffer_read(output_buffer_t* buffer, uint16_t* index, char** str, uint16_t* len)
-{
-    if (*index > buffer->count) {
-        *index = buffer->count;
-    }
-
-    bool has_next = false;
-
-    if (*index < buffer->count) {
-        uint8_t* pos = buffer->data;
-        uint16_t current = 0;
-
-        while (current != *index) {
-            uint16_t entry_len;
-            memcpy((void*)&entry_len, (void*)pos, sizeof(uint16_t));
-            pos += entry_len + sizeof(uint16_t);
-            current++;
-        }
-
-        memcpy((void*)len, (void*)pos, sizeof(uint16_t));
-        pos += sizeof(uint16_t);
-        *str = (char*)pos;
-
-        (*index)++;
-
-        has_next = true;
-    }
-
-    return has_next;
-}

components/meter_manager/CMakeLists.txt

@@ -1,29 +1,32 @@
-# List the source files to be compiled
+# components/meter_manager/CMakeLists.txt
+
 set(srcs
-    "driver/meter_ade7758/meter_ade7758.c"
+    driver/meter_ade7758/meter_ade7758.c
-    "driver/meter_ade7758/ade7758.c"
+    driver/meter_ade7758/ade7758.c
-    "driver/meter_orno/meter_orno513.c"
+    driver/meter_modbus/meter_orno513.c
-    "driver/meter_orno/meter_orno526.c"
+    driver/meter_modbus/meter_orno526.c
-    "driver/meter_orno/meter_orno516.c"
+    driver/meter_modbus/meter_orno516.c
-    "driver/meter_orno/meter_dts6619.c"
+    driver/meter_modbus/meter_dts6619.c
-    "driver/meter_orno/meter_dds661.c"
+    driver/meter_modbus/meter_dds661.c
-    "driver/meter_orno/meter_ea777.c"
+    driver/meter_modbus/meter_dds665.c
-    "driver/meter_orno/modbus_params.c"
+    driver/meter_modbus/meter_ea777.c
-    "driver/meter_zigbee/meter_zigbee.c"
+    driver/meter_modbus/meter_dts024m.c
-    "src/meter_manager.c"
+    driver/meter_modbus/modbus_params.c
-    "src/meter_events.c"
+    driver/meter_zigbee/meter_zigbee.c
+    src/meter_manager.c
+    src/meter_events.c
 )
 
-# List the include directories
 set(includes
-    "include"
+    include
-    "driver/meter_ade7758"
+    driver/meter_ade7758
-    "driver/meter_orno"
+    driver/meter_modbus
-    "driver/meter_zigbee"
+    driver/meter_zigbee
 )
 
-# Register the component with the ESP-IDF build system
+idf_component_register(
-idf_component_register(SRCS "${srcs}"
+    SRCS ${srcs}
-                      INCLUDE_DIRS "${includes}"
+    INCLUDE_DIRS ${includes}
-                      PRIV_REQUIRES nvs_flash
+    REQUIRES esp_event
-                      REQUIRES esp_event esp-modbus spi_bus_manager network)
+    PRIV_REQUIRES esp-modbus spi_bus_manager storage_service network
+)

components/meter_manager/driver/meter_ade7758/meter_ade7758.c

@@ -53,7 +53,7 @@ static void meter_ade7758_post_event(const meter_ade7758_internal_data_t *data)
     memcpy(evt.irms, data->irms, sizeof(evt.irms));
     memcpy(evt.watt, data->watt, sizeof(evt.watt));
 
-    esp_err_t err = esp_event_post(METER_EVENT, METER_EVENT_DATA_READY, &evt, sizeof(evt), pdMS_TO_TICKS(10));
+    esp_err_t err = esp_event_post(METER_EVENT, METER_EVENT_DATA_READY, &evt, sizeof(evt), portMAX_DELAY);
     if (err != ESP_OK) {
         ESP_LOGW(TAG, "Falha ao emitir evento: %s", esp_err_to_name(err));
     }

components/meter_manager/driver/meter_modbus/meter_dds661.c

@@ -0,0 +1,671 @@
+// components/meter_manager/driver/meter_modbus/meter_dds661.c
+// Driver Modbus RTU para DDS661.
+// Suporta 1 ou 2 DDS661 no mesmo bus RS485:
+//   GRID -> slave ID 1
+//   EVSE -> slave ID 2
+// Usa um único Modbus master e uma única task de leitura.
+
+#include "meter_dds661.h"
+
+#include "modbus_params.h"
+#include "mbcontroller.h"
+#include "meter_events.h"
+
+#include "esp_log.h"
+#include "esp_timer.h"
+#include "driver/uart.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "freertos/semphr.h"
+
+#include <stddef.h>
+#include <string.h>
+#include <math.h>
+
+#define TAG "serial_mdb_dds661"
+
+// ======= UART/Modbus config =======
+#define MB_PORT_NUM 2
+#define MB_DEV_SPEED 9600
+
+// Ajuste os pinos conforme seu hardware (evite GPIO2 para RTS/DE/RE se possível)
+#define MB_UART_TXD 17
+#define MB_UART_RXD 16
+#define MB_UART_RTS 2 // pino DE/RE do transceiver RS-485
+
+// ======= DDS661 no mesmo bus =======
+#define DDS661_GRID_SLAVE_ID 1
+#define DDS661_EVSE_SLAVE_ID 2
+
+#define UPDATE_INTERVAL (3000 / portTICK_PERIOD_MS)
+#define POLL_INTERVAL (120 / portTICK_PERIOD_MS)
+#define DDS661_LOCK_TIMEOUT pdMS_TO_TICKS(10000)
+
+// ======= Helpers típicos do teu projeto =======
+#define HOLD_OFFSET(field) ((uint16_t)(offsetof(holding_reg_params_t, field) + 1))
+#define STR(x) ((const char *)(x))
+#define OPTS(min, max, step) {.opt1 = min, .opt2 = max, .opt3 = step}
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
+
+// ======= Estado =======
+static bool is_initialized = false;
+static volatile bool task_should_run = false;
+static TaskHandle_t meter_task = NULL;
+static SemaphoreHandle_t dds661_lock = NULL;
+
+// ======= CIDs locais por meter =======
+enum
+{
+    CID_VOLTAGE = 0,
+    CID_CURRENT,
+    CID_ACTIVE_POWER_KW,
+    CID_POWER_FACTOR,
+    CID_FREQUENCY,
+    CID_TOTAL_ACTIVE_ENERGY_KWH,
+    CID_COUNT
+};
+
+typedef enum
+{
+    DDS661_SLOT_GRID = 0,
+    DDS661_SLOT_EVSE,
+    DDS661_MAX_INSTANCES
+} dds661_slot_t;
+
+typedef struct
+{
+    bool registered;
+    const char *source; // "GRID" ou "EVSE"
+    uint8_t slave_id;   // 1 ou 2
+    uint16_t cid_base;  // atribuído dinamicamente em dds661_rebuild_descriptors_locked()
+} dds661_instance_t;
+
+static dds661_instance_t dds661_instances[DDS661_MAX_INSTANCES] = {
+    [DDS661_SLOT_GRID] = {
+        .registered = false,
+        .source = "GRID",
+        .slave_id = DDS661_GRID_SLAVE_ID,
+        .cid_base = 0,
+    },
+    [DDS661_SLOT_EVSE] = {
+        .registered = false,
+        .source = "EVSE",
+        .slave_id = DDS661_EVSE_SLAVE_ID,
+        .cid_base = 0,
+    },
+};
+
+// ======= Mapa de registradores (Input Registers; FC=0x04) =======
+// Endereços típicos para DDS-661 (float32):
+#define REG_VOLTAGE 0x0000         // V    (float32)
+#define REG_CURRENT 0x0008         // A    (float32)
+#define REG_ACTIVE_POWER_KW 0x0012 // kW   (float32)
+#define REG_POWER_FACTOR 0x002A    // PF   (float32)
+#define REG_FREQUENCY 0x0036       // Hz   (float32)
+#define REG_E_ACTIVE_KWH 0x0100    // kWh  (float32)
+
+// ======= Template de parâmetros para um DDS661 =======
+static const mb_parameter_descriptor_t dds661_param_template[CID_COUNT] = {
+    {CID_VOLTAGE, "Voltage", "V", 1,
+     MB_PARAM_INPUT, REG_VOLTAGE, 2, HOLD_OFFSET(l1_voltage),
+     PARAM_TYPE_FLOAT_CDAB, 4, OPTS(0, 300, 0.1), PAR_PERMS_READ},
+
+    {CID_CURRENT, "Current", "A", 1,
+     MB_PARAM_INPUT, REG_CURRENT, 2, HOLD_OFFSET(l1_current),
+     PARAM_TYPE_FLOAT_CDAB, 4, OPTS(0, 100, 0.1), PAR_PERMS_READ},
+
+    {CID_ACTIVE_POWER_KW, "Active Power", "kW", 1,
+     MB_PARAM_INPUT, REG_ACTIVE_POWER_KW, 2, HOLD_OFFSET(active_power),
+     PARAM_TYPE_FLOAT_CDAB, 4, OPTS(-100, 100, 0.01), PAR_PERMS_READ},
+
+    {CID_POWER_FACTOR, "Power Factor", "", 1,
+     MB_PARAM_INPUT, REG_POWER_FACTOR, 2, HOLD_OFFSET(power_factor),
+     PARAM_TYPE_FLOAT_CDAB, 4, OPTS(-1, 1, 0.001), PAR_PERMS_READ},
+
+    {CID_FREQUENCY, "Frequency", "Hz", 1,
+     MB_PARAM_INPUT, REG_FREQUENCY, 2, HOLD_OFFSET(frequency),
+     PARAM_TYPE_FLOAT_CDAB, 4, OPTS(0, 100, 0.1), PAR_PERMS_READ},
+
+    {CID_TOTAL_ACTIVE_ENERGY_KWH, "Total Active Energy", "kWh", 1,
+     MB_PARAM_INPUT, REG_E_ACTIVE_KWH, 2, HOLD_OFFSET(active_energy),
+     PARAM_TYPE_FLOAT_CDAB, 4, OPTS(0, 1000000, 0.01), PAR_PERMS_READ},
+};
+
+// O esp-modbus exige cid e param_key únicos no Data Dictionary.
+// Como GRID e EVSE usam o mesmo mapa de registos, o param_key precisa de prefixo por instância.
+static const char *const dds661_param_keys[DDS661_MAX_INSTANCES][CID_COUNT] = {
+    [DDS661_SLOT_GRID] = {
+        "GRID Voltage",
+        "GRID Current",
+        "GRID Active Power",
+        "GRID Power Factor",
+        "GRID Frequency",
+        "GRID Total Active Energy",
+    },
+    [DDS661_SLOT_EVSE] = {
+        "EVSE Voltage",
+        "EVSE Current",
+        "EVSE Active Power",
+        "EVSE Power Factor",
+        "EVSE Frequency",
+        "EVSE Total Active Energy",
+    },
+};
+
+static mb_parameter_descriptor_t device_parameters_dds661[DDS661_MAX_INSTANCES * CID_COUNT];
+static uint16_t num_device_parameters_dds661 = 0;
+static bool dds661_descriptor_dirty = true;
+
+// ======= Ponteiro para buffer destino =======
+static void *get_param_ptr(const mb_parameter_descriptor_t *param)
+{
+    if (!param || param->param_offset == 0)
+        return NULL;
+    return ((uint8_t *)&holding_reg_params + param->param_offset - 1);
+}
+
+static bool dds661_has_registered_instance_locked(void)
+{
+    for (uint8_t i = 0; i < DDS661_MAX_INSTANCES; ++i)
+    {
+        if (dds661_instances[i].registered)
+            return true;
+    }
+    return false;
+}
+
+static esp_err_t dds661_rebuild_descriptors_locked(void)
+{
+    num_device_parameters_dds661 = 0;
+    dds661_descriptor_dirty = true;
+
+    for (uint8_t inst_idx = 0; inst_idx < DDS661_MAX_INSTANCES; ++inst_idx)
+    {
+        dds661_instance_t *inst = &dds661_instances[inst_idx];
+        if (!inst->registered)
+            continue;
+
+        // Mantém os CIDs contíguos no descriptor ativo.
+        // Isto evita problemas em versões do esp-modbus que tratam CID como índice.
+        inst->cid_base = num_device_parameters_dds661;
+
+        for (uint16_t local_cid = 0; local_cid < CID_COUNT; ++local_cid)
+        {
+            mb_parameter_descriptor_t *dst = &device_parameters_dds661[num_device_parameters_dds661++];
+            *dst = dds661_param_template[local_cid];
+            dst->cid = inst->cid_base + local_cid;
+            dst->param_key = dds661_param_keys[inst_idx][local_cid];
+            dst->mb_slave_addr = inst->slave_id;
+        }
+    }
+
+    dds661_descriptor_dirty = true;
+
+    ESP_LOGI(TAG, "DDS661 descriptor table prepared: %u parameters", num_device_parameters_dds661);
+    return ESP_OK;
+}
+
+static esp_err_t dds661_apply_descriptors_locked(void)
+{
+    if (num_device_parameters_dds661 == 0)
+        return ESP_ERR_INVALID_STATE;
+
+    if (!dds661_descriptor_dirty)
+        return ESP_OK;
+
+    esp_err_t err = mbc_master_set_descriptor(device_parameters_dds661, num_device_parameters_dds661);
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "mbc_master_set_descriptor failed: %s", esp_err_to_name(err));
+        return err;
+    }
+
+    dds661_descriptor_dirty = false;
+    ESP_LOGI(TAG, "DDS661 descriptor table applied: %u parameters", num_device_parameters_dds661);
+    return ESP_OK;
+}
+
+static esp_err_t dds661_master_init_once(void)
+{
+    if (is_initialized)
+        return ESP_OK;
+
+    if (!dds661_lock)
+    {
+        dds661_lock = xSemaphoreCreateMutex();
+        if (!dds661_lock)
+            return ESP_ERR_NO_MEM;
+    }
+
+    ESP_LOGI(TAG, "meter_dds661 Modbus master init");
+
+    mb_communication_info_t comm = {
+        .port = MB_PORT_NUM,
+        .mode = MB_MODE_RTU,
+        .baudrate = MB_DEV_SPEED,
+        .parity = UART_PARITY_EVEN, // DDS-661: 9600 8E1
+    };
+
+    void *handler = NULL;
+    esp_err_t err = mbc_master_init(MB_PORT_SERIAL_MASTER, &handler);
+    if (err != ESP_OK)
+        return err;
+
+    err = mbc_master_setup(&comm);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    // Pinos e parâmetros básicos
+    err = uart_set_pin(MB_PORT_NUM, MB_UART_TXD, MB_UART_RXD, MB_UART_RTS, UART_PIN_NO_CHANGE);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    err = uart_set_word_length(MB_PORT_NUM, UART_DATA_8_BITS);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    err = uart_set_hw_flow_ctrl(MB_PORT_NUM, UART_HW_FLOWCTRL_DISABLE, 0);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    err = uart_set_stop_bits(MB_PORT_NUM, UART_STOP_BITS_1);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    // IMPORTANTE: start antes do set_mode
+    err = mbc_master_start();
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    // Só agora muda para RS485 half duplex
+    err = uart_set_mode(MB_PORT_NUM, UART_MODE_RS485_HALF_DUPLEX);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    // Logs de debug Modbus. Reduz para ESP_LOG_INFO/ESP_LOG_WARN em produção se necessário.
+    esp_log_level_set("MB_CONTROLLER_MASTER", ESP_LOG_DEBUG);
+    esp_log_level_set("MB_PORT_COMMON", ESP_LOG_DEBUG);
+    esp_log_level_set("MB_SERIAL_MASTER", ESP_LOG_DEBUG);
+
+    vTaskDelay(pdMS_TO_TICKS(5));
+
+    is_initialized = true;
+    return ESP_OK;
+}
+
+static esp_err_t dds661_register_instance(dds661_slot_t slot)
+{
+    if (slot >= DDS661_MAX_INSTANCES)
+        return ESP_ERR_INVALID_ARG;
+
+    esp_err_t err = dds661_master_init_once();
+    if (err != ESP_OK)
+        return err;
+
+    if (xSemaphoreTake(dds661_lock, DDS661_LOCK_TIMEOUT) != pdTRUE)
+        return ESP_ERR_TIMEOUT;
+
+    dds661_instances[slot].registered = true;
+    ESP_LOGI(TAG, "DDS661 %s registered on Modbus slave ID %u",
+             dds661_instances[slot].source,
+             dds661_instances[slot].slave_id);
+
+    err = dds661_rebuild_descriptors_locked();
+    xSemaphoreGive(dds661_lock);
+
+    return err;
+}
+
+static void dds661_shutdown_if_idle(void)
+{
+    bool any_registered = false;
+
+    if (dds661_lock && xSemaphoreTake(dds661_lock, DDS661_LOCK_TIMEOUT) == pdTRUE)
+    {
+        any_registered = dds661_has_registered_instance_locked();
+        xSemaphoreGive(dds661_lock);
+    }
+
+    if (any_registered || !is_initialized)
+        return;
+
+    ESP_LOGI(TAG, "No DDS661 instances registered; stopping shared Modbus master");
+
+    task_should_run = false;
+    for (int i = 0; i < 20 && meter_task != NULL; ++i)
+    {
+        vTaskDelay(pdMS_TO_TICKS(10));
+    }
+
+    if (meter_task != NULL)
+    {
+        ESP_LOGW(TAG, "DDS661 task did not exit in time; deleting it");
+        vTaskDelete(meter_task);
+        meter_task = NULL;
+    }
+
+    esp_err_t err = mbc_master_destroy();
+    if (err != ESP_OK)
+        ESP_LOGW(TAG, "mbc_master_destroy() returned %s", esp_err_to_name(err));
+
+    if (uart_is_driver_installed(MB_PORT_NUM))
+        uart_driver_delete(MB_PORT_NUM);
+
+    is_initialized = false;
+    num_device_parameters_dds661 = 0;
+    dds661_descriptor_dirty = true;
+}
+
+static void dds661_unregister_instance(dds661_slot_t slot)
+{
+    if (slot >= DDS661_MAX_INSTANCES)
+        return;
+
+    if (!is_initialized || !dds661_lock)
+        return;
+
+    if (xSemaphoreTake(dds661_lock, DDS661_LOCK_TIMEOUT) == pdTRUE)
+    {
+        ESP_LOGI(TAG, "DDS661 %s unregistered", dds661_instances[slot].source);
+        dds661_instances[slot].registered = false;
+        (void)dds661_rebuild_descriptors_locked();
+        xSemaphoreGive(dds661_lock);
+    }
+
+    dds661_shutdown_if_idle();
+}
+
+static void dds661_read_instance_locked(const dds661_instance_t *inst)
+{
+    esp_err_t err;
+    const mb_parameter_descriptor_t *desc = NULL;
+
+    float v = 0.0f;     // V
+    float i = 0.0f;     // A
+    float pf = 0.0f;    // -
+    float hz = 0.0f;    // Hz
+    float e_kwh = 0.0f; // kWh
+    float p_kw = 0.0f;  // kW
+
+    float voltage[3] = {0};
+    float current[3] = {0};
+    int32_t watt[3] = {0};
+
+    bool got_any_value = false;
+
+    for (uint16_t local_cid = 0; local_cid < CID_COUNT; local_cid++)
+    {
+        const uint16_t cid = inst->cid_base + local_cid;
+
+        err = mbc_master_get_cid_info(cid, &desc);
+        if (err != ESP_OK || !desc)
+        {
+            ESP_LOGE(TAG, "%s get_cid_info(%u) failed: %s", inst->source, cid, esp_err_to_name(err));
+            continue;
+        }
+
+        void *data_ptr = get_param_ptr(desc);
+        if (!data_ptr)
+        {
+            ESP_LOGE(TAG, "%s CID %u (%s): null data_ptr", inst->source, cid, desc->param_key);
+            continue;
+        }
+
+        uint8_t type = 0;
+        err = mbc_master_get_parameter(cid, (char *)desc->param_key, (uint8_t *)data_ptr, &type);
+        if (err != ESP_OK)
+        {
+            ESP_LOGE(TAG, "%s CID %u (%s) read failed: %s",
+                     inst->source, cid, desc->param_key, esp_err_to_name(err));
+            vTaskDelay(POLL_INTERVAL);
+            continue;
+        }
+
+        uint8_t raw[4];
+        memcpy(raw, data_ptr, sizeof(raw));
+        ESP_LOGD(TAG, "%s CID %u (%s) raw bytes: %02X %02X %02X %02X",
+                 inst->source, cid, desc->param_key, raw[0], raw[1], raw[2], raw[3]);
+
+        const float val = *(float *)data_ptr;
+        got_any_value = true;
+
+        ESP_LOGD(TAG, "%s %s: %.3f %s", inst->source, desc->param_key, val, desc->param_units);
+
+        switch (local_cid)
+        {
+        case CID_VOLTAGE:
+            v = val;
+            voltage[0] = v;
+            break;
+        case CID_CURRENT:
+            i = val;
+            current[0] = i;
+            break;
+        case CID_POWER_FACTOR:
+            pf = val;
+            break;
+        case CID_FREQUENCY:
+            hz = val;
+            break;
+        case CID_ACTIVE_POWER_KW:
+        {
+            p_kw = val;
+
+            /*
+             * DDS661 bidirecional:
+             *   p_w > 0  => importação
+             *   p_w < 0  => exportação
+             *
+             * Alguns modelos devolvem W apesar do registo estar nomeado como kW.
+             * Outros podem devolver kW.
+             *
+             * Não usar abs() no valor final, apenas na deteção de escala.
+             */
+            float p_w = p_kw;
+
+            const float apparent_w = fabsf(v * i);
+
+            if (apparent_w > 1.0f && fabsf(p_w) < (apparent_w * 0.2f))
+            {
+                // Exemplo: -0.723 kW -> -723 W
+                p_w *= 1000.0f;
+            }
+
+            watt[0] = (int32_t)lrintf(p_w);
+            watt[1] = 0;
+            watt[2] = 0;
+            break;
+        }
+        case CID_TOTAL_ACTIVE_ENERGY_KWH:
+            e_kwh = val;
+            break;
+        default:
+            break;
+        }
+
+        vTaskDelay(POLL_INTERVAL);
+    }
+
+    if (!got_any_value)
+    {
+        ESP_LOGW(TAG, "%s no valid DDS661 values read in this cycle", inst->source);
+        return;
+    }
+
+    meter_event_data_t evt = {
+        .source = inst->source,
+        .frequency = hz,
+        .power_factor = pf,
+        .total_energy = e_kwh,
+        .watt_total = watt[0] + watt[1] + watt[2],
+        .timestamp_us = esp_timer_get_time(),
+    };
+    memcpy(evt.vrms, voltage, sizeof(evt.vrms));
+    memcpy(evt.irms, current, sizeof(evt.irms));
+    memcpy(evt.watt, watt, sizeof(evt.watt));
+
+    const int32_t p_total_w = watt[0] + watt[1] + watt[2];
+
+    ESP_LOGI(TAG,
+             "%s DDS661 event: V=%.1fV I=%.3fA P=%ldW E=%.3fkWh Hz=%.2f PF=%.3f",
+             inst->source,
+             voltage[0],
+             current[0],
+             (long)p_total_w,
+             e_kwh,
+             hz,
+             pf);
+
+    esp_err_t post_err = esp_event_post(METER_EVENT, METER_EVENT_DATA_READY, &evt, sizeof(evt), portMAX_DELAY);
+    if (post_err != ESP_OK)
+        ESP_LOGW(TAG, "%s failed to post meter event: %s", inst->source, esp_err_to_name(post_err));
+}
+
+// ======= Tarefa de aquisição =======
+static void serial_mdb_task(void *param)
+{
+    (void)param;
+
+    while (task_should_run)
+    {
+        if (!is_initialized || !dds661_lock)
+        {
+            vTaskDelay(UPDATE_INTERVAL);
+            continue;
+        }
+
+        bool had_instance = false;
+
+        for (uint8_t slot = 0; slot < DDS661_MAX_INSTANCES && task_should_run; ++slot)
+        {
+            if (xSemaphoreTake(dds661_lock, DDS661_LOCK_TIMEOUT) != pdTRUE)
+            {
+                ESP_LOGW(TAG, "DDS661 task timeout waiting lock");
+                continue;
+            }
+
+            dds661_instance_t inst = dds661_instances[slot];
+            if (inst.registered)
+            {
+                had_instance = true;
+                dds661_read_instance_locked(&inst);
+            }
+
+            xSemaphoreGive(dds661_lock);
+        }
+
+        vTaskDelay(had_instance ? UPDATE_INTERVAL : pdMS_TO_TICKS(500));
+    }
+
+    ESP_LOGI(TAG, "DDS661 task stopped");
+    meter_task = NULL;
+    vTaskDelete(NULL);
+}
+
+// ======= API pública =======
+// Compatibilidade: chamada antiga inicializa DDS661 como GRID/ID 1.
+esp_err_t meter_dds661_init(void)
+{
+    return meter_dds661_grid_init();
+}
+
+esp_err_t meter_dds661_grid_init(void)
+{
+    return dds661_register_instance(DDS661_SLOT_GRID);
+}
+
+esp_err_t meter_dds661_evse_init(void)
+{
+    return dds661_register_instance(DDS661_SLOT_EVSE);
+}
+
+esp_err_t meter_dds661_start(void)
+{
+    if (!is_initialized)
+    {
+        ESP_LOGE(TAG, "meter_dds661 not initialized");
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    if (!dds661_lock)
+        return ESP_ERR_INVALID_STATE;
+
+    if (xSemaphoreTake(dds661_lock, DDS661_LOCK_TIMEOUT) != pdTRUE)
+        return ESP_ERR_TIMEOUT;
+
+    const bool has_instance = dds661_has_registered_instance_locked();
+    esp_err_t desc_err = ESP_OK;
+    if (has_instance)
+        desc_err = dds661_apply_descriptors_locked();
+    xSemaphoreGive(dds661_lock);
+
+    if (!has_instance)
+    {
+        ESP_LOGW(TAG, "meter_dds661 start ignored: no instances registered");
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    if (desc_err != ESP_OK)
+        return desc_err;
+
+    if (meter_task == NULL)
+    {
+        task_should_run = true;
+        BaseType_t ok = xTaskCreate(serial_mdb_task, "meter_dds661_task", 4096, NULL, 3, &meter_task);
+        if (ok != pdPASS)
+        {
+            task_should_run = false;
+            meter_task = NULL;
+            return ESP_ERR_NO_MEM;
+        }
+        ESP_LOGI(TAG, "meter_dds661 shared task started");
+    }
+
+    return ESP_OK;
+}
+
+esp_err_t meter_dds661_grid_start(void)
+{
+    return meter_dds661_start();
+}
+
+esp_err_t meter_dds661_evse_start(void)
+{
+    return meter_dds661_start();
+}
+
+void meter_dds661_stop(void)
+{
+    meter_dds661_grid_stop();
+}
+
+void meter_dds661_grid_stop(void)
+{
+    dds661_unregister_instance(DDS661_SLOT_GRID);
+}
+
+void meter_dds661_evse_stop(void)
+{
+    dds661_unregister_instance(DDS661_SLOT_EVSE);
+}

components/meter_manager/driver/meter_modbus/meter_dds661.h

@@ -0,0 +1,58 @@
+#pragma once
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "esp_err.h"
+
+/**
+ * @brief Inicializa o driver DDS661 em modo compatível antigo: GRID / slave ID 1.
+ */
+esp_err_t meter_dds661_init(void);
+
+/**
+ * @brief Regista DDS661 como meter GRID no slave ID 1.
+ */
+esp_err_t meter_dds661_grid_init(void);
+
+/**
+ * @brief Regista DDS661 como meter EVSE no slave ID 2.
+ */
+esp_err_t meter_dds661_evse_init(void);
+
+/**
+ * @brief Inicia a task partilhada de leitura DDS661.
+ */
+esp_err_t meter_dds661_start(void);
+
+/**
+ * @brief Inicia a task partilhada de leitura DDS661 para GRID.
+ */
+esp_err_t meter_dds661_grid_start(void);
+
+/**
+ * @brief Inicia a task partilhada de leitura DDS661 para EVSE.
+ */
+esp_err_t meter_dds661_evse_start(void);
+
+/**
+ * @brief Para/remover DDS661 GRID em modo compatível antigo.
+ */
+void meter_dds661_stop(void);
+
+/**
+ * @brief Remove DDS661 GRID; só destrói o Modbus master se não houver EVSE registado.
+ */
+void meter_dds661_grid_stop(void);
+
+/**
+ * @brief Remove DDS661 EVSE; só destrói o Modbus master se não houver GRID registado.
+ */
+void meter_dds661_evse_stop(void);
+
+#ifdef __cplusplus
+}
+#endif

components/meter_manager/driver/meter_modbus/meter_dds665.c

@@ -0,0 +1,760 @@
+// components/meter_manager/driver/meter_modbus/meter_dds665.c
+// Driver Modbus RTU para DDS665.
+// Suporta 1 ou 2 DDS665 no mesmo bus RS485:
+//   GRID -> slave ID 1
+//   EVSE -> slave ID 2
+// Usa um único Modbus master e uma única task de leitura.
+//
+// Mapa DDS665 (FC=0x04, Input Registers, float32 IEEE-754):
+//   0x0000 Voltage
+//   0x0002 Current
+//   0x0004 Active power (W)
+//   0x0006 Power factor
+//   0x0008 Total active energy (kWh)
+//   0x000E Frequency (Hz)
+
+#include "meter_dds665.h"
+
+#include "modbus_params.h"
+#include "mbcontroller.h"
+#include "meter_events.h"
+
+#include "esp_log.h"
+#include "esp_timer.h"
+#include "driver/uart.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "freertos/semphr.h"
+
+#include <stddef.h>
+#include <stdint.h>
+#include <stdbool.h>
+#include <string.h>
+#include <math.h>
+
+#define TAG "serial_mdb_dds665"
+
+// ======= UART/Modbus config =======
+#define MB_PORT_NUM 2
+#define MB_DEV_SPEED 9600
+
+// Ajustar conforme o hardware. GPIO2 para RTS/DE/RE deve ser evitado quando possível.
+#define MB_UART_TXD 17
+#define MB_UART_RXD 16
+#define MB_UART_RTS 2
+
+// ======= DDS665 no mesmo bus =======
+#define DDS665_GRID_SLAVE_ID 1
+#define DDS665_EVSE_SLAVE_ID 2
+
+#define UPDATE_INTERVAL pdMS_TO_TICKS(3000)
+#define POLL_INTERVAL pdMS_TO_TICKS(120)
+#define DDS665_LOCK_TIMEOUT pdMS_TO_TICKS(10000)
+
+/*
+ * O DDS665 transmite cada float como dois registos Modbus:
+ * exemplo 43 62 66 66 -> aproximadamente 226,4 V.
+ *
+ * Nesta versão do esp-modbus, PARAM_TYPE_FLOAT_CDAB é a transformação
+ * que converte corretamente essa ordem para o float nativo do ESP32.
+ * Validado em hardware com DDS665, 9600 8N1.
+ */
+#ifndef DDS665_FLOAT_PARAM_TYPE
+#define DDS665_FLOAT_PARAM_TYPE PARAM_TYPE_FLOAT_CDAB
+#endif
+
+#define HOLD_OFFSET(field) ((uint16_t)(offsetof(holding_reg_params_t, field) + 1U))
+#define OPTS(minimum, maximum, step_value) \
+    {.opt1 = (minimum), .opt2 = (maximum), .opt3 = (step_value)}
+
+// ======= Estado =======
+static bool is_initialized = false;
+static volatile bool task_should_run = false;
+static TaskHandle_t meter_task = NULL;
+static SemaphoreHandle_t dds665_lock = NULL;
+
+// ======= CIDs locais por meter =======
+enum
+{
+    CID_VOLTAGE = 0,
+    CID_CURRENT,
+    CID_ACTIVE_POWER_W,
+    CID_POWER_FACTOR,
+    CID_FREQUENCY,
+    CID_TOTAL_ACTIVE_ENERGY_KWH,
+    CID_COUNT
+};
+
+#define DDS665_REQUIRED_MASK \
+    ((1UL << CID_VOLTAGE) |  \
+     (1UL << CID_CURRENT) |  \
+     (1UL << CID_ACTIVE_POWER_W))
+
+typedef enum
+{
+    DDS665_SLOT_GRID = 0,
+    DDS665_SLOT_EVSE,
+    DDS665_MAX_INSTANCES
+} dds665_slot_t;
+
+typedef struct
+{
+    bool registered;
+    const char *source; // "GRID" ou "EVSE"
+    uint8_t slave_id;   // 1 ou 2
+    uint16_t cid_base;  // atribuído em dds665_rebuild_descriptors_locked()
+} dds665_instance_t;
+
+static dds665_instance_t dds665_instances[DDS665_MAX_INSTANCES] = {
+    [DDS665_SLOT_GRID] = {
+        .registered = false,
+        .source = "GRID",
+        .slave_id = DDS665_GRID_SLAVE_ID,
+        .cid_base = 0,
+    },
+    [DDS665_SLOT_EVSE] = {
+        .registered = false,
+        .source = "EVSE",
+        .slave_id = DDS665_EVSE_SLAVE_ID,
+        .cid_base = 0,
+    },
+};
+
+// ======= Mapa de registradores DDS665 (Input Registers; FC=0x04) =======
+#define REG_VOLTAGE 0x0000U        // V, float32
+#define REG_CURRENT 0x0002U        // A, float32
+#define REG_ACTIVE_POWER_W 0x0004U // W, float32
+#define REG_POWER_FACTOR 0x0006U   // cos(phi), float32
+#define REG_E_ACTIVE_KWH 0x0008U   // kWh, float32
+#define REG_FREQUENCY 0x000EU      // Hz, float32
+
+// ======= Template de parâmetros para um DDS665 =======
+static const mb_parameter_descriptor_t dds665_param_template[CID_COUNT] = {
+    {CID_VOLTAGE, "Voltage", "V", 1,
+     MB_PARAM_INPUT, REG_VOLTAGE, 2, HOLD_OFFSET(l1_voltage),
+     DDS665_FLOAT_PARAM_TYPE, 4, OPTS(0, 300, 0.1), PAR_PERMS_READ},
+
+    {CID_CURRENT, "Current", "A", 1,
+     MB_PARAM_INPUT, REG_CURRENT, 2, HOLD_OFFSET(l1_current),
+     DDS665_FLOAT_PARAM_TYPE, 4, OPTS(0, 100, 0.1), PAR_PERMS_READ},
+
+    {CID_ACTIVE_POWER_W, "Active Power", "W", 1,
+     MB_PARAM_INPUT, REG_ACTIVE_POWER_W, 2, HOLD_OFFSET(active_power),
+     DDS665_FLOAT_PARAM_TYPE, 4,
+     OPTS(-100000, 100000, 1),
+     PAR_PERMS_READ},
+
+    {CID_POWER_FACTOR, "Power Factor", "", 1,
+     MB_PARAM_INPUT, REG_POWER_FACTOR, 2, HOLD_OFFSET(power_factor),
+     DDS665_FLOAT_PARAM_TYPE, 4, OPTS(-1, 1, 0.001), PAR_PERMS_READ},
+
+    {CID_FREQUENCY, "Frequency", "Hz", 1,
+     MB_PARAM_INPUT, REG_FREQUENCY, 2, HOLD_OFFSET(frequency),
+     DDS665_FLOAT_PARAM_TYPE, 4, OPTS(0, 100, 0.1), PAR_PERMS_READ},
+
+    {CID_TOTAL_ACTIVE_ENERGY_KWH, "Total Active Energy", "kWh", 1,
+     MB_PARAM_INPUT, REG_E_ACTIVE_KWH, 2, HOLD_OFFSET(active_energy),
+     DDS665_FLOAT_PARAM_TYPE, 4, OPTS(0, 1000000, 0.01), PAR_PERMS_READ},
+};
+
+// O esp-modbus exige cid e param_key únicos no Data Dictionary.
+static const char *const dds665_param_keys[DDS665_MAX_INSTANCES][CID_COUNT] = {
+    [DDS665_SLOT_GRID] = {
+        "GRID Voltage",
+        "GRID Current",
+        "GRID Active Power",
+        "GRID Power Factor",
+        "GRID Frequency",
+        "GRID Total Active Energy",
+    },
+    [DDS665_SLOT_EVSE] = {
+        "EVSE Voltage",
+        "EVSE Current",
+        "EVSE Active Power",
+        "EVSE Power Factor",
+        "EVSE Frequency",
+        "EVSE Total Active Energy",
+    },
+};
+
+static mb_parameter_descriptor_t device_parameters_dds665[DDS665_MAX_INSTANCES * CID_COUNT];
+static uint16_t num_device_parameters_dds665 = 0;
+static bool dds665_descriptor_dirty = true;
+
+// ======= Ponteiro para buffer destino =======
+static void *get_param_ptr(const mb_parameter_descriptor_t *param)
+{
+    if (!param || param->param_offset == 0)
+        return NULL;
+
+    return ((uint8_t *)&holding_reg_params + param->param_offset - 1U);
+}
+
+static bool dds665_has_registered_instance_locked(void)
+{
+    for (uint8_t i = 0; i < DDS665_MAX_INSTANCES; ++i)
+    {
+        if (dds665_instances[i].registered)
+            return true;
+    }
+
+    return false;
+}
+
+static esp_err_t dds665_rebuild_descriptors_locked(void)
+{
+    num_device_parameters_dds665 = 0;
+    dds665_descriptor_dirty = true;
+
+    for (uint8_t inst_idx = 0; inst_idx < DDS665_MAX_INSTANCES; ++inst_idx)
+    {
+        dds665_instance_t *inst = &dds665_instances[inst_idx];
+        if (!inst->registered)
+            continue;
+
+        // Mantém os CIDs contíguos no descriptor ativo.
+        inst->cid_base = num_device_parameters_dds665;
+
+        for (uint16_t local_cid = 0; local_cid < CID_COUNT; ++local_cid)
+        {
+            mb_parameter_descriptor_t *dst =
+                &device_parameters_dds665[num_device_parameters_dds665++];
+
+            *dst = dds665_param_template[local_cid];
+            dst->cid = inst->cid_base + local_cid;
+            dst->param_key = dds665_param_keys[inst_idx][local_cid];
+            dst->mb_slave_addr = inst->slave_id;
+        }
+    }
+
+    ESP_LOGI(TAG, "DDS665 descriptor table prepared: %u parameters",
+             (unsigned)num_device_parameters_dds665);
+    return ESP_OK;
+}
+
+static esp_err_t dds665_apply_descriptors_locked(void)
+{
+    if (num_device_parameters_dds665 == 0)
+        return ESP_ERR_INVALID_STATE;
+
+    if (!dds665_descriptor_dirty)
+        return ESP_OK;
+
+    esp_err_t err = mbc_master_set_descriptor(device_parameters_dds665,
+                                              num_device_parameters_dds665);
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "mbc_master_set_descriptor failed: %s",
+                 esp_err_to_name(err));
+        return err;
+    }
+
+    dds665_descriptor_dirty = false;
+    ESP_LOGI(TAG, "DDS665 descriptor table applied: %u parameters",
+             (unsigned)num_device_parameters_dds665);
+    return ESP_OK;
+}
+
+static esp_err_t dds665_master_init_once(void)
+{
+    if (is_initialized)
+        return ESP_OK;
+
+    if (!dds665_lock)
+    {
+        dds665_lock = xSemaphoreCreateMutex();
+        if (!dds665_lock)
+            return ESP_ERR_NO_MEM;
+    }
+
+    ESP_LOGI(TAG, "meter_dds665 Modbus master init");
+
+    mb_communication_info_t comm = {
+        .port = MB_PORT_NUM,
+        .mode = MB_MODE_RTU,
+        .baudrate = MB_DEV_SPEED,
+        .parity = UART_PARITY_DISABLE, // DDS665 testado: 9600 8N1
+    };
+
+    void *handler = NULL;
+    esp_err_t err = mbc_master_init(MB_PORT_SERIAL_MASTER, &handler);
+    if (err != ESP_OK)
+        return err;
+
+    err = mbc_master_setup(&comm);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    err = uart_set_pin(MB_PORT_NUM, MB_UART_TXD, MB_UART_RXD,
+                       MB_UART_RTS, UART_PIN_NO_CHANGE);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    err = uart_set_word_length(MB_PORT_NUM, UART_DATA_8_BITS);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    err = uart_set_hw_flow_ctrl(MB_PORT_NUM, UART_HW_FLOWCTRL_DISABLE, 0);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    err = uart_set_stop_bits(MB_PORT_NUM, UART_STOP_BITS_1);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    // O controlador Modbus deve arrancar antes da mudança para half-duplex.
+    err = mbc_master_start();
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    err = uart_set_mode(MB_PORT_NUM, UART_MODE_RS485_HALF_DUPLEX);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    esp_log_level_set("MB_CONTROLLER_MASTER", ESP_LOG_DEBUG);
+    esp_log_level_set("MB_PORT_COMMON", ESP_LOG_DEBUG);
+    esp_log_level_set("MB_SERIAL_MASTER", ESP_LOG_DEBUG);
+
+    vTaskDelay(pdMS_TO_TICKS(5));
+
+    is_initialized = true;
+    return ESP_OK;
+}
+
+static esp_err_t dds665_register_instance(dds665_slot_t slot)
+{
+    if (slot >= DDS665_MAX_INSTANCES)
+        return ESP_ERR_INVALID_ARG;
+
+    esp_err_t err = dds665_master_init_once();
+    if (err != ESP_OK)
+        return err;
+
+    if (xSemaphoreTake(dds665_lock, DDS665_LOCK_TIMEOUT) != pdTRUE)
+        return ESP_ERR_TIMEOUT;
+
+    if (dds665_instances[slot].registered)
+    {
+        xSemaphoreGive(dds665_lock);
+        return ESP_OK;
+    }
+
+    dds665_instances[slot].registered = true;
+    ESP_LOGI(TAG, "DDS665 %s registered on Modbus slave ID %u",
+             dds665_instances[slot].source,
+             (unsigned)dds665_instances[slot].slave_id);
+
+    err = dds665_rebuild_descriptors_locked();
+    xSemaphoreGive(dds665_lock);
+
+    return err;
+}
+
+static void dds665_shutdown_if_idle(void)
+{
+    bool any_registered = false;
+
+    if (dds665_lock &&
+        xSemaphoreTake(dds665_lock, DDS665_LOCK_TIMEOUT) == pdTRUE)
+    {
+        any_registered = dds665_has_registered_instance_locked();
+        xSemaphoreGive(dds665_lock);
+    }
+
+    if (any_registered || !is_initialized)
+        return;
+
+    ESP_LOGI(TAG, "No DDS665 instances registered; stopping shared Modbus master");
+
+    task_should_run = false;
+    for (int i = 0; i < 20 && meter_task != NULL; ++i)
+        vTaskDelay(pdMS_TO_TICKS(10));
+
+    if (meter_task != NULL)
+    {
+        ESP_LOGW(TAG, "DDS665 task did not exit in time; deleting it");
+        vTaskDelete(meter_task);
+        meter_task = NULL;
+    }
+
+    esp_err_t err = mbc_master_destroy();
+    if (err != ESP_OK)
+    {
+        ESP_LOGW(TAG, "mbc_master_destroy() returned %s",
+                 esp_err_to_name(err));
+    }
+
+    if (uart_is_driver_installed(MB_PORT_NUM))
+        uart_driver_delete(MB_PORT_NUM);
+
+    is_initialized = false;
+    num_device_parameters_dds665 = 0;
+    dds665_descriptor_dirty = true;
+}
+
+static void dds665_unregister_instance(dds665_slot_t slot)
+{
+    if (slot >= DDS665_MAX_INSTANCES)
+        return;
+
+    if (!is_initialized || !dds665_lock)
+        return;
+
+    if (xSemaphoreTake(dds665_lock, DDS665_LOCK_TIMEOUT) == pdTRUE)
+    {
+        if (dds665_instances[slot].registered)
+        {
+            ESP_LOGI(TAG, "DDS665 %s unregistered",
+                     dds665_instances[slot].source);
+            dds665_instances[slot].registered = false;
+
+            (void)dds665_rebuild_descriptors_locked();
+
+            // Se a outra instância continuar ativa, reaplica imediatamente
+            // a tabela compactada para manter cid_base e slave ID coerentes.
+            if (dds665_has_registered_instance_locked())
+            {
+                esp_err_t err = dds665_apply_descriptors_locked();
+                if (err != ESP_OK)
+                {
+                    ESP_LOGE(TAG, "Failed to reapply DDS665 descriptors: %s",
+                             esp_err_to_name(err));
+                }
+            }
+        }
+
+        xSemaphoreGive(dds665_lock);
+    }
+
+    dds665_shutdown_if_idle();
+}
+
+static bool dds665_is_valid_value(uint16_t local_cid, float value)
+{
+    if (!isfinite(value))
+        return false;
+
+    switch (local_cid)
+    {
+    case CID_VOLTAGE:
+        return value >= 0.0f && value <= 300.0f;
+    case CID_CURRENT:
+        return value >= 0.0f && value <= 100.0f;
+    case CID_ACTIVE_POWER_W:
+        return value >= -100000.0f && value <= 100000.0f;
+    case CID_POWER_FACTOR:
+        return value >= -1.1f && value <= 1.1f;
+    case CID_FREQUENCY:
+        return value >= 0.0f && value <= 100.0f;
+    case CID_TOTAL_ACTIVE_ENERGY_KWH:
+        return value >= 0.0f && value <= 1000000.0f;
+    default:
+        return false;
+    }
+}
+
+static void dds665_read_instance_locked(const dds665_instance_t *inst)
+{
+    esp_err_t err;
+    const mb_parameter_descriptor_t *desc = NULL;
+
+    float voltage[3] = {0.0f, 0.0f, 0.0f};
+    float current[3] = {0.0f, 0.0f, 0.0f};
+    int32_t watt[3] = {0, 0, 0};
+
+    float pf = 0.0f;
+    float hz = 0.0f;
+    float e_kwh = 0.0f;
+
+    uint32_t valid_mask = 0U;
+
+    for (uint16_t local_cid = 0; local_cid < CID_COUNT; ++local_cid)
+    {
+        const uint16_t cid = inst->cid_base + local_cid;
+
+        err = mbc_master_get_cid_info(cid, &desc);
+        if (err != ESP_OK || !desc)
+        {
+            ESP_LOGE(TAG, "%s get_cid_info(%u) failed: %s",
+                     inst->source, (unsigned)cid, esp_err_to_name(err));
+            continue;
+        }
+
+        void *data_ptr = get_param_ptr(desc);
+        if (!data_ptr)
+        {
+            ESP_LOGE(TAG, "%s CID %u (%s): null data_ptr",
+                     inst->source, (unsigned)cid, desc->param_key);
+            continue;
+        }
+
+        uint8_t type = 0;
+        err = mbc_master_get_parameter(cid, (char *)desc->param_key,
+                                       (uint8_t *)data_ptr, &type);
+        if (err != ESP_OK)
+        {
+            ESP_LOGE(TAG, "%s CID %u (%s) read failed: %s",
+                     inst->source, (unsigned)cid, desc->param_key,
+                     esp_err_to_name(err));
+            vTaskDelay(POLL_INTERVAL);
+            continue;
+        }
+
+        uint8_t raw[sizeof(float)];
+        memcpy(raw, data_ptr, sizeof(raw));
+        ESP_LOGD(TAG,
+                 "%s CID %u (%s) decoded bytes: %02X %02X %02X %02X",
+                 inst->source, (unsigned)cid, desc->param_key,
+                 raw[0], raw[1], raw[2], raw[3]);
+
+        const float value = *(const float *)data_ptr;
+        if (!dds665_is_valid_value(local_cid, value))
+        {
+            ESP_LOGW(TAG, "%s %s invalid value: %.6f",
+                     inst->source, desc->param_key, (double)value);
+            vTaskDelay(POLL_INTERVAL);
+            continue;
+        }
+
+        ESP_LOGD(TAG, "%s %s: %.3f %s",
+                 inst->source, desc->param_key, (double)value,
+                 desc->param_units);
+
+        valid_mask |= (1UL << local_cid);
+
+        switch (local_cid)
+        {
+        case CID_VOLTAGE:
+            voltage[0] = value;
+            break;
+
+        case CID_CURRENT:
+            current[0] = value;
+            break;
+
+        case CID_ACTIVE_POWER_W:
+            // Este DDS665 devolve potência ativa diretamente em watts.
+            watt[0] = (int32_t)lrintf(value);
+            break;
+
+        case CID_POWER_FACTOR:
+            pf = value;
+            break;
+
+        case CID_FREQUENCY:
+            hz = value;
+            break;
+
+        case CID_TOTAL_ACTIVE_ENERGY_KWH:
+            e_kwh = value;
+            break;
+
+        default:
+            break;
+        }
+
+        vTaskDelay(POLL_INTERVAL);
+    }
+
+    if ((valid_mask & DDS665_REQUIRED_MASK) != DDS665_REQUIRED_MASK)
+    {
+        ESP_LOGW(TAG,
+                 "%s incomplete DDS665 sample, mask=0x%02lX",
+                 inst->source,
+                 (unsigned long)valid_mask);
+        return;
+    }
+
+    meter_event_data_t evt = {
+        .source = inst->source,
+        .frequency = hz,
+        .power_factor = pf,
+        .total_energy = e_kwh,
+        .watt_total = watt[0],
+        .timestamp_us = esp_timer_get_time(),
+    };
+
+    memcpy(evt.vrms, voltage, sizeof(evt.vrms));
+    memcpy(evt.irms, current, sizeof(evt.irms));
+    memcpy(evt.watt, watt, sizeof(evt.watt));
+
+    ESP_LOGI(TAG,
+             "%s DDS665 event: V=%.1fV I=%.3fA P=%ldW E=%.3fkWh Hz=%.2f PF=%.3f mask=0x%02lX",
+             inst->source,
+             (double)voltage[0],
+             (double)current[0],
+             (long)evt.watt_total,
+             (double)e_kwh,
+             (double)hz,
+             (double)pf,
+             (unsigned long)valid_mask);
+
+    esp_err_t post_err = esp_event_post(METER_EVENT,
+                                        METER_EVENT_DATA_READY,
+                                        &evt,
+                                        sizeof(evt),
+                                        portMAX_DELAY);
+    if (post_err != ESP_OK)
+    {
+        ESP_LOGW(TAG, "%s failed to post meter event: %s",
+                 inst->source, esp_err_to_name(post_err));
+    }
+}
+
+// ======= Tarefa de aquisição =======
+static void serial_mdb_task(void *param)
+{
+    (void)param;
+
+    while (task_should_run)
+    {
+        if (!is_initialized || !dds665_lock)
+        {
+            vTaskDelay(UPDATE_INTERVAL);
+            continue;
+        }
+
+        bool had_instance = false;
+
+        for (uint8_t slot = 0;
+             slot < DDS665_MAX_INSTANCES && task_should_run;
+             ++slot)
+        {
+            if (xSemaphoreTake(dds665_lock, DDS665_LOCK_TIMEOUT) != pdTRUE)
+            {
+                ESP_LOGW(TAG, "DDS665 task timeout waiting lock");
+                continue;
+            }
+
+            dds665_instance_t inst = dds665_instances[slot];
+            if (inst.registered)
+            {
+                had_instance = true;
+                dds665_read_instance_locked(&inst);
+            }
+
+            xSemaphoreGive(dds665_lock);
+        }
+
+        vTaskDelay(had_instance ? UPDATE_INTERVAL : pdMS_TO_TICKS(500));
+    }
+
+    ESP_LOGI(TAG, "DDS665 task stopped");
+    meter_task = NULL;
+    vTaskDelete(NULL);
+}
+
+// ======= API pública =======
+// Compatibilidade: chamada antiga inicializa DDS665 como GRID/ID 1.
+esp_err_t meter_dds665_init(void)
+{
+    return meter_dds665_grid_init();
+}
+
+esp_err_t meter_dds665_grid_init(void)
+{
+    return dds665_register_instance(DDS665_SLOT_GRID);
+}
+
+esp_err_t meter_dds665_evse_init(void)
+{
+    return dds665_register_instance(DDS665_SLOT_EVSE);
+}
+
+esp_err_t meter_dds665_start(void)
+{
+    if (!is_initialized)
+    {
+        ESP_LOGE(TAG, "meter_dds665 not initialized");
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    if (!dds665_lock)
+        return ESP_ERR_INVALID_STATE;
+
+    if (xSemaphoreTake(dds665_lock, DDS665_LOCK_TIMEOUT) != pdTRUE)
+        return ESP_ERR_TIMEOUT;
+
+    const bool has_instance = dds665_has_registered_instance_locked();
+    esp_err_t desc_err = ESP_OK;
+    if (has_instance)
+        desc_err = dds665_apply_descriptors_locked();
+
+    xSemaphoreGive(dds665_lock);
+
+    if (!has_instance)
+    {
+        ESP_LOGW(TAG, "meter_dds665 start ignored: no instances registered");
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    if (desc_err != ESP_OK)
+        return desc_err;
+
+    if (meter_task == NULL)
+    {
+        task_should_run = true;
+        BaseType_t ok = xTaskCreate(serial_mdb_task,
+                                    "meter_dds665_task",
+                                    4096,
+                                    NULL,
+                                    3,
+                                    &meter_task);
+        if (ok != pdPASS)
+        {
+            task_should_run = false;
+            meter_task = NULL;
+            return ESP_ERR_NO_MEM;
+        }
+
+        ESP_LOGI(TAG, "meter_dds665 shared task started");
+    }
+
+    return ESP_OK;
+}
+
+esp_err_t meter_dds665_grid_start(void)
+{
+    return meter_dds665_start();
+}
+
+esp_err_t meter_dds665_evse_start(void)
+{
+    return meter_dds665_start();
+}
+
+void meter_dds665_stop(void)
+{
+    meter_dds665_grid_stop();
+}
+
+void meter_dds665_grid_stop(void)
+{
+    dds665_unregister_instance(DDS665_SLOT_GRID);
+}
+
+void meter_dds665_evse_stop(void)
+{
+    dds665_unregister_instance(DDS665_SLOT_EVSE);
+}

components/meter_manager/driver/meter_modbus/meter_dds665.h

@@ -0,0 +1,58 @@
+#pragma once
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "esp_err.h"
+
+/**
+ * @brief Inicializa o driver DDS665 em modo compatível antigo: GRID / slave ID 1.
+ */
+esp_err_t meter_dds665_init(void);
+
+/**
+ * @brief Regista DDS665 como meter GRID no slave ID 1.
+ */
+esp_err_t meter_dds665_grid_init(void);
+
+/**
+ * @brief Regista DDS665 como meter EVSE no slave ID 2.
+ */
+esp_err_t meter_dds665_evse_init(void);
+
+/**
+ * @brief Inicia a task partilhada de leitura DDS665.
+ */
+esp_err_t meter_dds665_start(void);
+
+/**
+ * @brief Inicia a task partilhada de leitura DDS665 para GRID.
+ */
+esp_err_t meter_dds665_grid_start(void);
+
+/**
+ * @brief Inicia a task partilhada de leitura DDS665 para EVSE.
+ */
+esp_err_t meter_dds665_evse_start(void);
+
+/**
+ * @brief Para/remove DDS665 GRID em modo compatível antigo.
+ */
+void meter_dds665_stop(void);
+
+/**
+ * @brief Remove DDS665 GRID; só destrói o Modbus master se não houver EVSE registado.
+ */
+void meter_dds665_grid_stop(void);
+
+/**
+ * @brief Remove DDS665 EVSE; só destrói o Modbus master se não houver GRID registado.
+ */
+void meter_dds665_evse_stop(void);
+
+#ifdef __cplusplus
+}
+#endif

components/meter_manager/driver/meter_modbus/meter_dts024m.c

@@ -0,0 +1,542 @@
+// meter_dts024m.c — Driver Modbus RTU para DTS024M (ESP-IDF / esp-modbus)
+// Versão PRODUÇÃO (SEM AUTO-PROBE): parâmetros fixos (baud/parity/id/FC/base).
+// Ajusta os #defines DTS024M_PROD_* conforme o teu medidor.
+
+#include "meter_events.h"
+#include "modbus_params.h"
+#include "mbcontroller.h"
+#include "esp_log.h"
+#include "esp_err.h"
+#include "driver/uart.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+
+#include <stddef.h>
+#include <string.h>
+
+#include "meter_dts024m.h"
+
+#define TAG "serial_mdb_dts024m"
+
+// ===== UART / RS-485 =====
+#define MB_PORT_NUM 2
+
+// Ajuste os pinos conforme seu hardware
+#define MB_UART_TXD 17
+#define MB_UART_RXD 16
+#define MB_UART_RTS 2 // pino DE/RE do transceiver RS-485
+
+// ===== Timings =====
+#define UPDATE_INTERVAL (5000 / portTICK_PERIOD_MS)
+#define POLL_INTERVAL (200 / portTICK_PERIOD_MS)
+
+// ===== Helpers =====
+#define STR(fieldname) ((const char *)(fieldname))
+#define OPTS(min_val, max_val, step_val) {.opt1 = (min_val), .opt2 = (max_val), .opt3 = (step_val)}
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
+
+// ===== Config PRODUÇÃO (sem AUTO-PROBE) =====
+// Ajusta estes valores:
+#define DTS024M_PROD_BAUD 2400
+#define DTS024M_PROD_PARITY UART_PARITY_DISABLE // 0 = none; UART_PARITY_EVEN se 8E1
+#define DTS024M_PROD_SLAVE_ID 1                 // endereço Modbus (1..247)
+#define DTS024M_PROD_AREA MB_PARAM_INPUT        // MB_PARAM_INPUT (FC04) ou MB_PARAM_HOLDING (FC03)
+#define DTS024M_PROD_BASE_OFFSET 0              // 0 ou 1 (depende se o mapa é 0-based ou 1-based)
+
+// ===== Estado =====
+static bool is_initialized = false;
+static bool mb_started = false;
+static TaskHandle_t meter_task = NULL;
+
+// ============================================================================
+// MAPA DE REGISTROS (template) — pode variar conforme firmware.
+// Estes endereços são um “perfil” comum.
+// ============================================================================
+#define DTS024M_L1_VOLTAGE 0x0000 // U32, 0.01 V (2 regs)
+#define DTS024M_L2_VOLTAGE 0x0002
+#define DTS024M_L3_VOLTAGE 0x0004
+
+#define DTS024M_L1_CURRENT 0x0006 // U32, 0.001 A (2 regs)
+#define DTS024M_L2_CURRENT 0x0008
+#define DTS024M_L3_CURRENT 0x000A
+
+#define DTS024M_L1_ACTIVE_P 0x000C // I32 (two’s complement), (depende do modelo/escala)
+#define DTS024M_L2_ACTIVE_P 0x000E
+#define DTS024M_L3_ACTIVE_P 0x0010
+
+#define DTS024M_PF_L1 0x001E // I16 (two’s complement), 0.001
+#define DTS024M_PF_L2 0x001F
+#define DTS024M_PF_L3 0x0020
+
+#define DTS024M_FREQUENCY 0x002A // U16, 0.01 Hz
+
+#define DTS024M_TOTAL_ACTIVE_E 0x0404 // U32, 0.01 kWh (2 regs)
+
+// ============================================================================
+// Conversões signed (two’s complement) — porque o projeto não tem PARAM_TYPE_I*
+// ============================================================================
+static inline int32_t s32_from_u32(uint32_t x)
+{
+    return (x & 0x80000000u) ? (int32_t)(x - 0x100000000ULL) : (int32_t)x;
+}
+
+static inline int16_t s16_from_u16(uint16_t x)
+{
+    return (x & 0x8000u) ? (int16_t)(x - 0x10000u) : (int16_t)x;
+}
+
+// ============================================================================
+// CIDs
+// ============================================================================
+enum
+{
+    CID_DTS024M_L1_VOLTAGE = 0,
+    CID_DTS024M_L2_VOLTAGE,
+    CID_DTS024M_L3_VOLTAGE,
+
+    CID_DTS024M_L1_CURRENT,
+    CID_DTS024M_L2_CURRENT,
+    CID_DTS024M_L3_CURRENT,
+
+    CID_DTS024M_L1_ACTIVE_P,
+    CID_DTS024M_L2_ACTIVE_P,
+    CID_DTS024M_L3_ACTIVE_P,
+
+    CID_DTS024M_PF_L1,
+    CID_DTS024M_PF_L2,
+    CID_DTS024M_PF_L3,
+
+    CID_DTS024M_FREQUENCY,
+    CID_DTS024M_TOTAL_ACTIVE_E,
+};
+
+// ============================================================================
+// DESCRIPTORS (TEMPLATE) — copiamos para RAM e ajustamos:
+//   - slave_id
+//   - base offset (0/1)
+//   - mb_param_type (HOLDING/INPUT)
+// ============================================================================
+static const mb_parameter_descriptor_t device_parameters_dts024m_tmpl[] = {
+
+    // Tensões (U32 / 2 regs) — 0.01 V
+    {CID_DTS024M_L1_VOLTAGE, STR("L1 Voltage"), STR("V"), 1,
+     MB_PARAM_HOLDING, DTS024M_L1_VOLTAGE, 2,
+     0, PARAM_TYPE_U32, 4, OPTS(0, 0xFFFFFFFF, 1), PAR_PERMS_READ},
+
+    {CID_DTS024M_L2_VOLTAGE, STR("L2 Voltage"), STR("V"), 1,
+     MB_PARAM_HOLDING, DTS024M_L2_VOLTAGE, 2,
+     0, PARAM_TYPE_U32, 4, OPTS(0, 0xFFFFFFFF, 1), PAR_PERMS_READ},
+
+    {CID_DTS024M_L3_VOLTAGE, STR("L3 Voltage"), STR("V"), 1,
+     MB_PARAM_HOLDING, DTS024M_L3_VOLTAGE, 2,
+     0, PARAM_TYPE_U32, 4, OPTS(0, 0xFFFFFFFF, 1), PAR_PERMS_READ},
+
+    // Correntes (U32 / 2 regs) — 0.001 A
+    {CID_DTS024M_L1_CURRENT, STR("L1 Current"), STR("A"), 1,
+     MB_PARAM_HOLDING, DTS024M_L1_CURRENT, 2,
+     0, PARAM_TYPE_U32, 4, OPTS(0, 0xFFFFFFFF, 1), PAR_PERMS_READ},
+
+    {CID_DTS024M_L2_CURRENT, STR("L2 Current"), STR("A"), 1,
+     MB_PARAM_HOLDING, DTS024M_L2_CURRENT, 2,
+     0, PARAM_TYPE_U32, 4, OPTS(0, 0xFFFFFFFF, 1), PAR_PERMS_READ},
+
+    {CID_DTS024M_L3_CURRENT, STR("L3 Current"), STR("A"), 1,
+     MB_PARAM_HOLDING, DTS024M_L3_CURRENT, 2,
+     0, PARAM_TYPE_U32, 4, OPTS(0, 0xFFFFFFFF, 1), PAR_PERMS_READ},
+
+    // Potência ativa por fase (U32 / 2 regs no descriptor; interpretamos como signed I32)
+    {CID_DTS024M_L1_ACTIVE_P, STR("L1 Active Power"), STR("W"), 1,
+     MB_PARAM_HOLDING, DTS024M_L1_ACTIVE_P, 2,
+     0, PARAM_TYPE_U32, 4, OPTS(0, 0xFFFFFFFF, 1), PAR_PERMS_READ},
+
+    {CID_DTS024M_L2_ACTIVE_P, STR("L2 Active Power"), STR("W"), 1,
+     MB_PARAM_HOLDING, DTS024M_L2_ACTIVE_P, 2,
+     0, PARAM_TYPE_U32, 4, OPTS(0, 0xFFFFFFFF, 1), PAR_PERMS_READ},
+
+    {CID_DTS024M_L3_ACTIVE_P, STR("L3 Active Power"), STR("W"), 1,
+     MB_PARAM_HOLDING, DTS024M_L3_ACTIVE_P, 2,
+     0, PARAM_TYPE_U32, 4, OPTS(0, 0xFFFFFFFF, 1), PAR_PERMS_READ},
+
+    // PF (U16 / 1 reg; interpretamos como signed I16) — 0.001
+    {CID_DTS024M_PF_L1, STR("L1 PF"), STR(""), 1,
+     MB_PARAM_HOLDING, DTS024M_PF_L1, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 65535, 1), PAR_PERMS_READ},
+
+    {CID_DTS024M_PF_L2, STR("L2 PF"), STR(""), 1,
+     MB_PARAM_HOLDING, DTS024M_PF_L2, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 65535, 1), PAR_PERMS_READ},
+
+    {CID_DTS024M_PF_L3, STR("L3 PF"), STR(""), 1,
+     MB_PARAM_HOLDING, DTS024M_PF_L3, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 65535, 1), PAR_PERMS_READ},
+
+    // Frequência (U16 / 1 reg) — 0.01 Hz
+    {CID_DTS024M_FREQUENCY, STR("Frequency"), STR("Hz"), 1,
+     MB_PARAM_HOLDING, DTS024M_FREQUENCY, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 10000, 1), PAR_PERMS_READ},
+
+    // Energia ativa total (U32 / 2 regs) — 0.01 kWh
+    {CID_DTS024M_TOTAL_ACTIVE_E, STR("Total Active Energy"), STR("kWh"), 1,
+     MB_PARAM_HOLDING, DTS024M_TOTAL_ACTIVE_E, 2,
+     0, PARAM_TYPE_U32, 4, OPTS(0, 0xFFFFFFFF, 1), PAR_PERMS_READ},
+};
+
+static mb_parameter_descriptor_t device_parameters_dts024m[ARRAY_SIZE(device_parameters_dts024m_tmpl)];
+static const uint16_t num_device_parameters_dts024m = ARRAY_SIZE(device_parameters_dts024m);
+
+static void dts024m_build_descriptors(uint8_t slave_id, uint16_t base_offset, mb_param_type_t area)
+{
+    memcpy(device_parameters_dts024m,
+           device_parameters_dts024m_tmpl,
+           sizeof(device_parameters_dts024m));
+
+    for (uint16_t i = 0; i < num_device_parameters_dts024m; ++i)
+    {
+        device_parameters_dts024m[i].mb_slave_addr = slave_id;
+        device_parameters_dts024m[i].mb_reg_start =
+            (uint16_t)(device_parameters_dts024m[i].mb_reg_start + base_offset);
+        device_parameters_dts024m[i].mb_param_type = area; // HOLDING (FC03) ou INPUT (FC04)
+    }
+}
+
+// ============================================================================
+// Modbus master init (fixo) — garante ordem correta (start -> uart_set_mode)
+// ============================================================================
+static esp_err_t dts024m_master_reinit(uint32_t baud, uart_parity_t parity)
+{
+    if (mb_started)
+    {
+        (void)mbc_master_destroy();
+        mb_started = false;
+    }
+
+    if (uart_is_driver_installed(MB_PORT_NUM))
+    {
+        uart_driver_delete(MB_PORT_NUM);
+    }
+
+    mb_communication_info_t comm = {
+        .port = MB_PORT_NUM,
+        .mode = MB_MODE_RTU,
+        .baudrate = baud,
+        .parity = parity};
+
+    void *handler = NULL;
+
+    esp_err_t err = mbc_master_init(MB_PORT_SERIAL_MASTER, &handler);
+    if (err != ESP_OK)
+        return err;
+
+    err = mbc_master_setup(&comm);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    err = uart_set_pin(MB_PORT_NUM, MB_UART_TXD, MB_UART_RXD, MB_UART_RTS, UART_PIN_NO_CHANGE);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    // IMPORTANTE: start antes de uart_set_mode (driver UART costuma ser instalado no start)
+    err = mbc_master_start();
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    mb_started = true;
+
+    err = uart_set_mode(MB_PORT_NUM, UART_MODE_RS485_HALF_DUPLEX);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        mb_started = false;
+        return err;
+    }
+
+    vTaskDelay(pdMS_TO_TICKS(40));
+    return ESP_OK;
+}
+
+// ============================================================================
+// Post do evento de medição
+// ============================================================================
+static void meter_dts024m_post_event(float *voltage, float *current, int *power_w,
+                                     float freq_hz, float pf_avg, float total_kwh)
+{
+    meter_event_data_t evt = {
+        .source = "GRID",
+        .frequency = freq_hz,
+        .power_factor = pf_avg,
+        .total_energy = total_kwh};
+
+    memcpy(evt.vrms, voltage, sizeof(evt.vrms));
+    memcpy(evt.irms, current, sizeof(evt.irms));
+    memcpy(evt.watt, power_w, sizeof(evt.watt));
+
+    esp_err_t err = esp_event_post(METER_EVENT, METER_EVENT_DATA_READY,
+                                   &evt, sizeof(evt), portMAX_DELAY);
+    if (err != ESP_OK)
+    {
+        ESP_LOGW(TAG, "Falha ao emitir evento: %s", esp_err_to_name(err));
+    }
+}
+
+// ============================================================================
+// Task de polling
+// ============================================================================
+static void serial_mdb_dts024m_task(void *param)
+{
+    (void)param;
+
+    esp_err_t err;
+    const mb_parameter_descriptor_t *desc = NULL;
+
+    float v[3] = {0};
+    float i[3] = {0};
+    float pf[3] = {0};
+    float freq = 0.0f;
+    float total_kwh = 0.0f;
+
+    int p_w[3] = {0};
+
+    vTaskDelay(pdMS_TO_TICKS(200)); // settle
+
+    while (1)
+    {
+        for (uint16_t cid = 0; cid < num_device_parameters_dts024m; cid++)
+        {
+            err = mbc_master_get_cid_info(cid, &desc);
+            if (err != ESP_OK || !desc)
+            {
+                continue;
+            }
+
+            uint8_t type = 0;
+            uint16_t raw_u16 = 0;
+            uint32_t raw_u32 = 0;
+
+            void *value_ptr = &raw_u16;
+
+            // U32
+            switch (cid)
+            {
+            case CID_DTS024M_L1_VOLTAGE:
+            case CID_DTS024M_L2_VOLTAGE:
+            case CID_DTS024M_L3_VOLTAGE:
+            case CID_DTS024M_L1_CURRENT:
+            case CID_DTS024M_L2_CURRENT:
+            case CID_DTS024M_L3_CURRENT:
+            case CID_DTS024M_L1_ACTIVE_P:
+            case CID_DTS024M_L2_ACTIVE_P:
+            case CID_DTS024M_L3_ACTIVE_P:
+            case CID_DTS024M_TOTAL_ACTIVE_E:
+                value_ptr = &raw_u32;
+                break;
+            default:
+                value_ptr = &raw_u16;
+                break;
+            }
+
+            // 1 retry simples em caso de timeout (podes remover se quiseres menos carga)
+            err = mbc_master_get_parameter(cid,
+                                           (char *)desc->param_key,
+                                           (uint8_t *)value_ptr,
+                                           &type);
+            if (err == ESP_ERR_TIMEOUT)
+            {
+                vTaskDelay(pdMS_TO_TICKS(60));
+                err = mbc_master_get_parameter(cid,
+                                               (char *)desc->param_key,
+                                               (uint8_t *)value_ptr,
+                                               &type);
+            }
+
+            if (err == ESP_OK)
+            {
+                switch (cid)
+                {
+                // V (0.01V)
+                case CID_DTS024M_L1_VOLTAGE:
+                    v[0] = ((float)raw_u32) * 0.01f;
+                    break;
+                case CID_DTS024M_L2_VOLTAGE:
+                    v[1] = ((float)raw_u32) * 0.01f;
+                    break;
+                case CID_DTS024M_L3_VOLTAGE:
+                    v[2] = ((float)raw_u32) * 0.01f;
+                    break;
+
+                // I (0.001A)
+                case CID_DTS024M_L1_CURRENT:
+                    i[0] = ((float)raw_u32) * 0.001f;
+                    break;
+                case CID_DTS024M_L2_CURRENT:
+                    i[1] = ((float)raw_u32) * 0.001f;
+                    break;
+                case CID_DTS024M_L3_CURRENT:
+                    i[2] = ((float)raw_u32) * 0.001f;
+                    break;
+
+                // P ativa (two’s complement I32) — atenção: escala depende do modelo
+                case CID_DTS024M_L1_ACTIVE_P:
+                    p_w[0] = (int)s32_from_u32(raw_u32);
+                    break;
+                case CID_DTS024M_L2_ACTIVE_P:
+                    p_w[1] = (int)s32_from_u32(raw_u32);
+                    break;
+                case CID_DTS024M_L3_ACTIVE_P:
+                    p_w[2] = (int)s32_from_u32(raw_u32);
+                    break;
+
+                // PF (two’s complement I16; 0.001)
+                case CID_DTS024M_PF_L1:
+                    pf[0] = ((float)s16_from_u16(raw_u16)) * 0.001f;
+                    break;
+                case CID_DTS024M_PF_L2:
+                    pf[1] = ((float)s16_from_u16(raw_u16)) * 0.001f;
+                    break;
+                case CID_DTS024M_PF_L3:
+                    pf[2] = ((float)s16_from_u16(raw_u16)) * 0.001f;
+                    break;
+
+                // Freq (0.01Hz)
+                case CID_DTS024M_FREQUENCY:
+                    freq = ((float)raw_u16) * 0.01f;
+                    break;
+
+                // Energia (0.01kWh)
+                case CID_DTS024M_TOTAL_ACTIVE_E:
+                    total_kwh = ((float)raw_u32) * 0.01f;
+                    break;
+
+                default:
+                    break;
+                }
+
+                ESP_LOGD(TAG, "%s (cid=%u) ok (u16=%u u32=%u)",
+                         desc->param_key, cid, (unsigned)raw_u16, (unsigned)raw_u32);
+            }
+            else
+            {
+                ESP_LOGE(TAG, "CID %u (%s) read failed: %s",
+                         cid, desc->param_key, esp_err_to_name(err));
+            }
+
+            vTaskDelay(POLL_INTERVAL);
+        }
+
+        // PF médio simples (ignora zeros)
+        float pf_sum = 0.0f;
+        int pf_cnt = 0;
+        for (int k = 0; k < 3; ++k)
+        {
+            if (pf[k] != 0.0f)
+            {
+                pf_sum += pf[k];
+                pf_cnt++;
+            }
+        }
+        float pf_avg = (pf_cnt ? pf_sum / pf_cnt : 0.0f);
+
+        meter_dts024m_post_event(v, i, p_w, freq, pf_avg, total_kwh);
+        vTaskDelay(UPDATE_INTERVAL);
+    }
+}
+
+// ============================================================================
+// Init / Start / Stop
+// ============================================================================
+esp_err_t meter_dts024m_init(void)
+{
+    if (is_initialized)
+    {
+        ESP_LOGW(TAG, "Already initialized");
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    // init fixo (produção)
+    esp_err_t err = dts024m_master_reinit(DTS024M_PROD_BAUD, DTS024M_PROD_PARITY);
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "master_reinit failed: %s", esp_err_to_name(err));
+        return err;
+    }
+
+    // monta descriptors reais com ID/offset/area fixos
+    dts024m_build_descriptors(DTS024M_PROD_SLAVE_ID, DTS024M_PROD_BASE_OFFSET, DTS024M_PROD_AREA);
+
+    // aplica descriptors reais
+    esp_err_t derr = mbc_master_set_descriptor(device_parameters_dts024m,
+                                               num_device_parameters_dts024m);
+    if (derr != ESP_OK)
+    {
+        ESP_LOGE(TAG, "set_descriptor failed: %s", esp_err_to_name(derr));
+        return derr;
+    }
+
+    is_initialized = true;
+    ESP_LOGI(TAG, "DTS024M initialized (PROD) baud=%d parity=%d id=%d area=%s base=%d",
+             DTS024M_PROD_BAUD,
+             (int)DTS024M_PROD_PARITY,
+             DTS024M_PROD_SLAVE_ID,
+             (DTS024M_PROD_AREA == MB_PARAM_HOLDING ? "FC03" : "FC04"),
+             DTS024M_PROD_BASE_OFFSET);
+
+    return ESP_OK;
+}
+
+esp_err_t meter_dts024m_start(void)
+{
+    if (!is_initialized)
+    {
+        ESP_LOGE(TAG, "Not initialized");
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    if (meter_task == NULL)
+    {
+        xTaskCreate(serial_mdb_dts024m_task,
+                    "meter_dts024m_task",
+                    4096, NULL, 3, &meter_task);
+        ESP_LOGI(TAG, "DTS024M task started");
+    }
+
+    return ESP_OK;
+}
+
+void meter_dts024m_stop(void)
+{
+    if (!is_initialized)
+    {
+        ESP_LOGW(TAG, "Not initialized, skipping stop");
+        return;
+    }
+
+    if (meter_task)
+    {
+        vTaskDelete(meter_task);
+        meter_task = NULL;
+        ESP_LOGI(TAG, "DTS024M task stopped");
+    }
+
+    if (mb_started)
+    {
+        (void)mbc_master_destroy();
+        mb_started = false;
+    }
+
+    if (uart_is_driver_installed(MB_PORT_NUM))
+    {
+        uart_driver_delete(MB_PORT_NUM);
+        ESP_LOGI(TAG, "UART driver deleted");
+    }
+
+    is_initialized = false;
+    ESP_LOGI(TAG, "Meter DTS024M cleaned up");
+}

components/meter_manager/driver/meter_modbus/meter_dts024m.h

@@ -1,5 +1,5 @@
-#ifndef METER_EA777_H_
+#ifndef METER_DTS024M_H_
-#define METER_EA777_H_
+#define METER_DTS024M_H_
 
 #include <stdint.h>
 #include <stdbool.h>
@@ -10,26 +10,26 @@ extern "C" {
 #endif
 
 /**
- * @brief Inicializa o driver do medidor EA777 (UART RS485, Modbus, registradores).
+ * @brief Inicializa o driver do medidor DTS024M (UART RS485, Modbus, registradores).
- * 
+ *
  * @return esp_err_t Retorna ESP_OK se a inicialização for bem-sucedida, caso contrário retorna um erro.
  */
-esp_err_t meter_ea777_init(void);
+esp_err_t meter_dts024m_init(void);
 
 /**
- * @brief Inicia a tarefa de leitura de dados do medidor EA777.
+ * @brief Inicia a tarefa de leitura de dados do medidor DTS024M.
- * 
+ *
  * @return esp_err_t Retorna ESP_OK se a tarefa for iniciada com sucesso, caso contrário retorna um erro.
  */
-esp_err_t meter_ea777_start(void);
+esp_err_t meter_dts024m_start(void);
 
 /**
- * @brief Para a tarefa de leitura e limpa os dados internos do medidor EA777.
+ * @brief Para a tarefa de leitura e limpa os dados internos do medidor DTS024M.
  */
-void meter_ea777_stop(void);
+void meter_dts024m_stop(void);
 
 #ifdef __cplusplus
 }
 #endif
 
-#endif /* METER_EA777_H_ */
+#endif /* METER_DTS024M_H_ */

components/meter_manager/driver/meter_modbus/meter_dts6619.c

@@ -138,7 +138,7 @@ static void meter_dts6619_post_event(float *voltage, float *current, int *power_
     memcpy(evt.watt, power_w, sizeof(evt.watt));
 
     esp_err_t err = esp_event_post(METER_EVENT, METER_EVENT_DATA_READY,
-                                   &evt, sizeof(evt), pdMS_TO_TICKS(10));
+                                   &evt, sizeof(evt), portMAX_DELAY);
     if (err != ESP_OK)
     {
         ESP_LOGW(TAG, "Falha ao emitir evento: %s", esp_err_to_name(err));

components/meter_manager/driver/meter_modbus/meter_dts6619.h

@@ -7,14 +7,14 @@
 
 /**
  * @brief Inicializa o driver do medidor dts6619 (SPI, mutex, registradores).
- * 
+ *
  * @return esp_err_t Retorna ESP_OK se a inicialização for bem-sucedida, caso contrário retorna um erro.
  */
 esp_err_t meter_dts6619_init(void);
 
 /**
  * @brief Inicia a tarefa de leitura de dados do medidor DTS6619.
- * 
+ *
  * @return esp_err_t Retorna ESP_OK se a tarefa for iniciada com sucesso, caso contrário retorna um erro.
  */
 esp_err_t meter_dts6619_start(void);
@@ -24,7 +24,6 @@ esp_err_t meter_dts6619_start(void);
  */
 void meter_dts6619_stop(void);
 
-
 #ifdef __cplusplus
 }
 #endif

components/meter_manager/driver/meter_modbus/meter_ea777.c

@@ -0,0 +1,761 @@
+// meter_ea777.c — Driver Modbus RTU para EARU EA777 (ESP-IDF)
+// Suporta 1 ou 2 EA777 no mesmo bus RS485:
+//   GRID -> slave ID 1
+//   EVSE -> slave ID 2
+// Usa um único Modbus master e uma única task de leitura.
+
+#include "meter_ea777.h"
+
+#include "meter_events.h"
+#include "modbus_params.h"
+#include "mbcontroller.h"
+
+#include "esp_log.h"
+#include "esp_timer.h"
+#include "driver/uart.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+#include "freertos/semphr.h"
+
+#include <stddef.h>
+#include <string.h>
+#include <math.h>
+
+#include <inttypes.h>
+
+#define TAG "serial_mdb_ea777"
+
+// ===== UART / RS-485 =====
+#define MB_PORT_NUM 1
+#define MB_DEV_SPEED 9600
+
+// Ajuste os pinos conforme seu hardware (evite GPIO2 para RTS/DE/RE se possível)
+#define MB_UART_TXD 17
+#define MB_UART_RXD 16
+#define MB_UART_RTS 2 // pino DE/RE do transceiver RS-485
+
+// ===== EA777 no mesmo bus =====
+#define EA777_GRID_SLAVE_ID 1
+#define EA777_EVSE_SLAVE_ID 2
+
+// ===== Timings =====
+#define UPDATE_INTERVAL (5000 / portTICK_PERIOD_MS)
+#define POLL_INTERVAL (200 / portTICK_PERIOD_MS)
+#define EA777_LOCK_TIMEOUT pdMS_TO_TICKS(10000)
+
+// ===== Helpers =====
+#define STR(fieldname) ((const char *)(fieldname))
+#define OPTS(min_val, max_val, step_val) {.opt1 = min_val, .opt2 = max_val, .opt3 = step_val}
+#define ARRAY_SIZE(a) (sizeof(a) / sizeof((a)[0]))
+
+// ===== Estado =====
+static bool is_initialized = false;
+static volatile bool task_should_run = false;
+static TaskHandle_t meter_task = NULL;
+static SemaphoreHandle_t ea777_lock = NULL;
+
+static inline uint32_t ea777_swap_words_u32(uint32_t x)
+{
+    return ((x & 0xFFFFu) << 16) | ((x >> 16) & 0xFFFFu);
+}
+
+// ============================================================================
+// ============ MAPA DE REGISTROS EA777 (Holding 0x03) ========================
+// Endereços zero-based. Tipos reais (engenharia) via fator de escala.
+// Tensões (0.1 V)
+#define EA777_L1VOLTAGE 0x0000
+#define EA777_L2VOLTAGE 0x0001
+#define EA777_L3VOLTAGE 0x0002
+// Correntes (0.01 A)
+#define EA777_L1CURRENT 0x0003
+#define EA777_L2CURRENT 0x0004
+#define EA777_L3CURRENT 0x0005
+// Potência ativa total (W)
+#define EA777_TOTAL_ACTIVE_P 0x0007
+// Fator de potência por fase (0.001)
+#define EA777_PF_L1 0x0014
+#define EA777_PF_L2 0x0015
+#define EA777_PF_L3 0x0016
+// Frequência (0.01 Hz)
+#define EA777_FREQUENCY 0x001A
+// Energia ativa total (U32 * 0.01 kWh, 2 registradores)
+#define EA777_TOTAL_ACTIVE_E 0x001D
+// ============================================================================
+
+// ============ CIDs locais por meter ============
+enum
+{
+    CID_EA777_L1_VOLTAGE = 0,
+    CID_EA777_L2_VOLTAGE,
+    CID_EA777_L3_VOLTAGE,
+    CID_EA777_L1_CURRENT,
+    CID_EA777_L2_CURRENT,
+    CID_EA777_L3_CURRENT,
+    CID_EA777_TOTAL_ACTIVE_P,
+    CID_EA777_PF_L1,
+    CID_EA777_PF_L2,
+    CID_EA777_PF_L3,
+    CID_EA777_FREQUENCY,
+    CID_EA777_TOTAL_ACTIVE_E,
+    CID_EA777_COUNT,
+};
+
+typedef enum
+{
+    EA777_SLOT_GRID = 0,
+    EA777_SLOT_EVSE,
+    EA777_MAX_INSTANCES
+} ea777_slot_t;
+
+typedef struct
+{
+    bool registered;
+    const char *source; // "GRID" ou "EVSE"
+    uint8_t slave_id;   // 1 ou 2
+    uint16_t cid_base;  // atribuído dinamicamente em ea777_rebuild_descriptors_locked()
+} ea777_instance_t;
+
+static ea777_instance_t ea777_instances[EA777_MAX_INSTANCES] = {
+    [EA777_SLOT_GRID] = {
+        .registered = false,
+        .source = "GRID",
+        .slave_id = EA777_GRID_SLAVE_ID,
+        .cid_base = 0,
+    },
+    [EA777_SLOT_EVSE] = {
+        .registered = false,
+        .source = "EVSE",
+        .slave_id = EA777_EVSE_SLAVE_ID,
+        .cid_base = 0,
+    },
+};
+
+// ======= Template de descritores (Holding registers) =======
+// Nota: param_offset = 0 -> não usamos holding_reg_params_t aqui.
+static const mb_parameter_descriptor_t ea777_param_template[CID_EA777_COUNT] = {
+    // Tensões (0.1 V)
+    {CID_EA777_L1_VOLTAGE, STR("L1 Voltage"), STR("V"), 1,
+     MB_PARAM_HOLDING, EA777_L1VOLTAGE, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 4000, 1), PAR_PERMS_READ},
+
+    {CID_EA777_L2_VOLTAGE, STR("L2 Voltage"), STR("V"), 1,
+     MB_PARAM_HOLDING, EA777_L2VOLTAGE, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 4000, 1), PAR_PERMS_READ},
+
+    {CID_EA777_L3_VOLTAGE, STR("L3 Voltage"), STR("V"), 1,
+     MB_PARAM_HOLDING, EA777_L3VOLTAGE, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 4000, 1), PAR_PERMS_READ},
+
+    // Correntes (0.01 A)
+    {CID_EA777_L1_CURRENT, STR("L1 Current"), STR("A"), 1,
+     MB_PARAM_HOLDING, EA777_L1CURRENT, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 10000, 1), PAR_PERMS_READ},
+
+    {CID_EA777_L2_CURRENT, STR("L2 Current"), STR("A"), 1,
+     MB_PARAM_HOLDING, EA777_L2CURRENT, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 10000, 1), PAR_PERMS_READ},
+
+    {CID_EA777_L3_CURRENT, STR("L3 Current"), STR("A"), 1,
+     MB_PARAM_HOLDING, EA777_L3CURRENT, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 10000, 1), PAR_PERMS_READ},
+
+    // Potência ativa total (W)
+    {CID_EA777_TOTAL_ACTIVE_P, STR("Total Active Power"), STR("W"), 1,
+     MB_PARAM_HOLDING, EA777_TOTAL_ACTIVE_P, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 60000, 1), PAR_PERMS_READ},
+
+    // Fator de potência (0.001)
+    {CID_EA777_PF_L1, STR("L1 PF"), STR(""), 1,
+     MB_PARAM_HOLDING, EA777_PF_L1, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 1000, 1), PAR_PERMS_READ},
+
+    {CID_EA777_PF_L2, STR("L2 PF"), STR(""), 1,
+     MB_PARAM_HOLDING, EA777_PF_L2, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 1000, 1), PAR_PERMS_READ},
+
+    {CID_EA777_PF_L3, STR("L3 PF"), STR(""), 1,
+     MB_PARAM_HOLDING, EA777_PF_L3, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 1000, 1), PAR_PERMS_READ},
+
+    // Frequência (0.01 Hz)
+    {CID_EA777_FREQUENCY, STR("Frequency"), STR("Hz"), 1,
+     MB_PARAM_HOLDING, EA777_FREQUENCY, 1,
+     0, PARAM_TYPE_U16, 2, OPTS(0, 10000, 1), PAR_PERMS_READ},
+
+    // Energia ativa total (U32 * 0.01 kWh, 2 regs)
+    {CID_EA777_TOTAL_ACTIVE_E, STR("Total Active Energy"), STR("kWh"), 1,
+     MB_PARAM_HOLDING, EA777_TOTAL_ACTIVE_E, 2,
+     0, PARAM_TYPE_U32, 4, OPTS(0, 0xFFFFFFFF, 1), PAR_PERMS_READ},
+};
+
+// O esp-modbus exige cid e param_key únicos no Data Dictionary.
+// Como GRID e EVSE usam o mesmo mapa de registos, o param_key precisa de prefixo por instância.
+static const char *const ea777_param_keys[EA777_MAX_INSTANCES][CID_EA777_COUNT] = {
+    [EA777_SLOT_GRID] = {
+        "GRID L1 Voltage",
+        "GRID L2 Voltage",
+        "GRID L3 Voltage",
+        "GRID L1 Current",
+        "GRID L2 Current",
+        "GRID L3 Current",
+        "GRID Total Active Power",
+        "GRID L1 PF",
+        "GRID L2 PF",
+        "GRID L3 PF",
+        "GRID Frequency",
+        "GRID Total Active Energy",
+    },
+    [EA777_SLOT_EVSE] = {
+        "EVSE L1 Voltage",
+        "EVSE L2 Voltage",
+        "EVSE L3 Voltage",
+        "EVSE L1 Current",
+        "EVSE L2 Current",
+        "EVSE L3 Current",
+        "EVSE Total Active Power",
+        "EVSE L1 PF",
+        "EVSE L2 PF",
+        "EVSE L3 PF",
+        "EVSE Frequency",
+        "EVSE Total Active Energy",
+    },
+};
+
+static mb_parameter_descriptor_t device_parameters_ea777[EA777_MAX_INSTANCES * CID_EA777_COUNT];
+static uint16_t num_device_parameters_ea777 = 0;
+static bool ea777_descriptor_dirty = true;
+
+static bool ea777_has_registered_instance_locked(void)
+{
+    for (uint8_t i = 0; i < EA777_MAX_INSTANCES; ++i)
+    {
+        if (ea777_instances[i].registered)
+            return true;
+    }
+    return false;
+}
+
+static esp_err_t ea777_rebuild_descriptors_locked(void)
+{
+    num_device_parameters_ea777 = 0;
+    ea777_descriptor_dirty = true;
+
+    for (uint8_t inst_idx = 0; inst_idx < EA777_MAX_INSTANCES; ++inst_idx)
+    {
+        ea777_instance_t *inst = &ea777_instances[inst_idx];
+        if (!inst->registered)
+            continue;
+
+        // Mantém os CIDs contíguos no descriptor ativo.
+        // Isto evita problemas em versões do esp-modbus que tratam CID como índice.
+        inst->cid_base = num_device_parameters_ea777;
+
+        for (uint16_t local_cid = 0; local_cid < CID_EA777_COUNT; ++local_cid)
+        {
+            mb_parameter_descriptor_t *dst = &device_parameters_ea777[num_device_parameters_ea777++];
+            *dst = ea777_param_template[local_cid];
+            dst->cid = inst->cid_base + local_cid;
+            dst->param_key = ea777_param_keys[inst_idx][local_cid];
+            dst->mb_slave_addr = inst->slave_id;
+        }
+    }
+
+    ea777_descriptor_dirty = true;
+
+    ESP_LOGI(TAG, "EA777 descriptor table prepared: %u parameters", num_device_parameters_ea777);
+    return ESP_OK;
+}
+
+static esp_err_t ea777_apply_descriptors_locked(void)
+{
+    if (num_device_parameters_ea777 == 0)
+        return ESP_ERR_INVALID_STATE;
+
+    if (!ea777_descriptor_dirty)
+        return ESP_OK;
+
+    esp_err_t err = mbc_master_set_descriptor(device_parameters_ea777, num_device_parameters_ea777);
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "mbc_master_set_descriptor failed: %s", esp_err_to_name(err));
+        return err;
+    }
+
+    ea777_descriptor_dirty = false;
+    ESP_LOGI(TAG, "EA777 descriptor table applied: %u parameters", num_device_parameters_ea777);
+    return ESP_OK;
+}
+
+static esp_err_t ea777_master_init_once(void)
+{
+    if (is_initialized)
+        return ESP_OK;
+
+    if (!ea777_lock)
+    {
+        ea777_lock = xSemaphoreCreateMutex();
+        if (!ea777_lock)
+            return ESP_ERR_NO_MEM;
+    }
+
+    if (uart_is_driver_installed(MB_PORT_NUM))
+    {
+        uart_driver_delete(MB_PORT_NUM);
+        ESP_LOGI(TAG, "UART driver deleted before EA777 init");
+    }
+
+    (void)mbc_master_destroy();
+
+    ESP_LOGI(TAG, "meter_ea777 Modbus master init");
+
+    mb_communication_info_t comm = {
+        .port = MB_PORT_NUM,
+        .mode = MB_MODE_RTU,
+        .baudrate = MB_DEV_SPEED,
+        .parity = UART_PARITY_EVEN,
+    };
+
+    void *handler = NULL;
+    esp_err_t err = mbc_master_init(MB_PORT_SERIAL_MASTER, &handler);
+    if (err != ESP_OK)
+        return err;
+
+    err = mbc_master_setup(&comm);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    // RS-485 half duplex
+    err = uart_set_pin(MB_PORT_NUM,
+                       MB_UART_TXD, MB_UART_RXD,
+                       MB_UART_RTS, UART_PIN_NO_CHANGE);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    err = mbc_master_start();
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    err = uart_set_mode(MB_PORT_NUM, UART_MODE_RS485_HALF_DUPLEX);
+    if (err != ESP_OK)
+    {
+        (void)mbc_master_destroy();
+        return err;
+    }
+
+    vTaskDelay(pdMS_TO_TICKS(50));
+
+    is_initialized = true;
+    ESP_LOGI(TAG, "EA777 Modbus master initialized (9600 8E1, Holding Reg 0x03)");
+    return ESP_OK;
+}
+
+static esp_err_t ea777_register_instance(ea777_slot_t slot)
+{
+    if (slot >= EA777_MAX_INSTANCES)
+        return ESP_ERR_INVALID_ARG;
+
+    esp_err_t err = ea777_master_init_once();
+    if (err != ESP_OK)
+        return err;
+
+    if (xSemaphoreTake(ea777_lock, EA777_LOCK_TIMEOUT) != pdTRUE)
+        return ESP_ERR_TIMEOUT;
+
+    ea777_instances[slot].registered = true;
+    ESP_LOGI(TAG, "EA777 %s registered on Modbus slave ID %u",
+             ea777_instances[slot].source,
+             ea777_instances[slot].slave_id);
+
+    err = ea777_rebuild_descriptors_locked();
+    xSemaphoreGive(ea777_lock);
+
+    return err;
+}
+
+static void ea777_shutdown_if_idle(void)
+{
+    bool any_registered = false;
+
+    if (ea777_lock && xSemaphoreTake(ea777_lock, EA777_LOCK_TIMEOUT) == pdTRUE)
+    {
+        any_registered = ea777_has_registered_instance_locked();
+        xSemaphoreGive(ea777_lock);
+    }
+
+    if (any_registered || !is_initialized)
+        return;
+
+    ESP_LOGI(TAG, "No EA777 instances registered; stopping shared Modbus master");
+
+    task_should_run = false;
+    for (int i = 0; i < 20 && meter_task != NULL; ++i)
+    {
+        vTaskDelay(pdMS_TO_TICKS(10));
+    }
+
+    if (meter_task != NULL)
+    {
+        ESP_LOGW(TAG, "EA777 task did not exit in time; deleting it");
+        vTaskDelete(meter_task);
+        meter_task = NULL;
+    }
+
+    esp_err_t err = mbc_master_destroy();
+    if (err != ESP_OK)
+        ESP_LOGW(TAG, "mbc_master_destroy() returned %s", esp_err_to_name(err));
+
+    if (uart_is_driver_installed(MB_PORT_NUM))
+    {
+        uart_driver_delete(MB_PORT_NUM);
+        ESP_LOGI(TAG, "UART driver deleted");
+    }
+
+    is_initialized = false;
+    num_device_parameters_ea777 = 0;
+    ea777_descriptor_dirty = true;
+}
+
+static void ea777_unregister_instance(ea777_slot_t slot)
+{
+    if (slot >= EA777_MAX_INSTANCES)
+        return;
+
+    if (!is_initialized || !ea777_lock)
+        return;
+
+    if (xSemaphoreTake(ea777_lock, EA777_LOCK_TIMEOUT) == pdTRUE)
+    {
+        ESP_LOGI(TAG, "EA777 %s unregistered", ea777_instances[slot].source);
+        ea777_instances[slot].registered = false;
+        (void)ea777_rebuild_descriptors_locked();
+        xSemaphoreGive(ea777_lock);
+    }
+
+    ea777_shutdown_if_idle();
+}
+
+static void meter_ea777_post_event(const ea777_instance_t *inst,
+                                   const float *voltage,
+                                   const float *current,
+                                   const int32_t *power_w,
+                                   int32_t total_power_w,
+                                   float freq_hz,
+                                   float pf_avg,
+                                   float total_kwh)
+{
+    meter_event_data_t evt = {
+        .source = inst->source,
+        .frequency = freq_hz,
+        .power_factor = pf_avg,
+        .total_energy = total_kwh,
+        .watt_total = total_power_w,
+        .timestamp_us = esp_timer_get_time(),
+    };
+
+    memcpy(evt.vrms, voltage, sizeof(evt.vrms));
+    memcpy(evt.irms, current, sizeof(evt.irms));
+    memcpy(evt.watt, power_w, sizeof(evt.watt));
+
+    esp_err_t err = esp_event_post(METER_EVENT, METER_EVENT_DATA_READY,
+                                   &evt, sizeof(evt), portMAX_DELAY);
+    if (err != ESP_OK)
+    {
+        ESP_LOGW(TAG, "%s falha ao emitir evento: %s", inst->source, esp_err_to_name(err));
+    }
+}
+
+static void ea777_read_instance_locked(const ea777_instance_t *inst)
+{
+    esp_err_t err;
+    const mb_parameter_descriptor_t *desc = NULL;
+
+    float v[3] = {0};
+    float i[3] = {0};
+    float pf[3] = {0};
+    float freq = 0.0f;
+    float total_kwh = 0.0f;
+    int32_t total_active_power_w = 0;
+    bool got_any_value = false;
+
+    for (uint16_t local_cid = 0; local_cid < CID_EA777_COUNT; local_cid++)
+    {
+        const uint16_t cid = inst->cid_base + local_cid;
+
+        err = mbc_master_get_cid_info(cid, &desc);
+        if (err != ESP_OK || !desc)
+        {
+            ESP_LOGE(TAG, "%s get_cid_info(%u) failed: %s", inst->source, cid, esp_err_to_name(err));
+            continue;
+        }
+
+        uint8_t type = 0;
+        uint16_t raw16 = 0;
+        uint32_t raw32 = 0;
+
+        void *value_ptr = (local_cid == CID_EA777_TOTAL_ACTIVE_E) ? (void *)&raw32 : (void *)&raw16;
+
+        // 1 retry simples em caso de timeout
+        err = mbc_master_get_parameter(cid,
+                                       (char *)desc->param_key,
+                                       (uint8_t *)value_ptr,
+                                       &type);
+        if (err == ESP_ERR_TIMEOUT)
+        {
+            vTaskDelay(pdMS_TO_TICKS(60));
+            err = mbc_master_get_parameter(cid,
+                                           (char *)desc->param_key,
+                                           (uint8_t *)value_ptr,
+                                           &type);
+        }
+
+        if (err == ESP_OK)
+        {
+            got_any_value = true;
+
+            switch (local_cid)
+            {
+            case CID_EA777_L1_VOLTAGE:
+                v[0] = ((float)raw16) * 0.1f;
+                break;
+            case CID_EA777_L2_VOLTAGE:
+                v[1] = ((float)raw16) * 0.1f;
+                break;
+            case CID_EA777_L3_VOLTAGE:
+                v[2] = ((float)raw16) * 0.1f;
+                break;
+
+            case CID_EA777_L1_CURRENT:
+                i[0] = ((float)raw16) * 0.01f;
+                break;
+            case CID_EA777_L2_CURRENT:
+                i[1] = ((float)raw16) * 0.01f;
+                break;
+            case CID_EA777_L3_CURRENT:
+                i[2] = ((float)raw16) * 0.01f;
+                break;
+
+            case CID_EA777_TOTAL_ACTIVE_P:
+                total_active_power_w = (int32_t)raw16;
+                break;
+
+            case CID_EA777_PF_L1:
+                pf[0] = ((float)raw16) * 0.001f;
+                break;
+            case CID_EA777_PF_L2:
+                pf[1] = ((float)raw16) * 0.001f;
+                break;
+            case CID_EA777_PF_L3:
+                pf[2] = ((float)raw16) * 0.001f;
+                break;
+
+            case CID_EA777_FREQUENCY:
+                freq = ((float)raw16) * 0.01f;
+                break;
+
+            case CID_EA777_TOTAL_ACTIVE_E:
+            {
+                uint32_t raw_e = ea777_swap_words_u32(raw32);
+                total_kwh = ((float)raw_e) * 0.01f;
+
+                ESP_LOGI(TAG,
+                         "%s EA777 energy raw=0x%08" PRIX32
+                         " swapped=0x%08" PRIX32 " => %.3f kWh",
+                         inst->source,
+                         raw32,
+                         raw_e,
+                         (double)total_kwh);
+                break;
+            }
+
+            default:
+                break;
+            }
+
+            ESP_LOGD(TAG, "%s %s (cid=%u) -> raw16=%u raw32=%u",
+                     inst->source, desc->param_key, cid,
+                     (unsigned int)raw16,
+                     (unsigned int)raw32);
+        }
+        else
+        {
+            ESP_LOGE(TAG, "%s CID %u (%s) read failed: %s",
+                     inst->source, cid, desc->param_key, esp_err_to_name(err));
+        }
+
+        vTaskDelay(POLL_INTERVAL);
+    }
+
+    if (!got_any_value)
+    {
+        ESP_LOGW(TAG, "%s no valid EA777 values read in this cycle", inst->source);
+        return;
+    }
+
+    // Potência por fase aproximada: P = V * I * PF.
+    // O EA777 também fornece potência ativa total; esta é usada em watt_total quando existe.
+    int32_t p_int[3] = {
+        (int32_t)lrintf(v[0] * i[0] * pf[0]),
+        (int32_t)lrintf(v[1] * i[1] * pf[1]),
+        (int32_t)lrintf(v[2] * i[2] * pf[2]),
+    };
+
+    const int32_t p_sum = p_int[0] + p_int[1] + p_int[2];
+    const int32_t watt_total = (total_active_power_w != 0) ? total_active_power_w : p_sum;
+
+    // PF médio simples (ignora zeros)
+    float pf_sum = 0.0f;
+    int pf_cnt = 0;
+    for (int k = 0; k < 3; ++k)
+    {
+        if (pf[k] != 0.0f)
+        {
+            pf_sum += pf[k];
+            pf_cnt++;
+        }
+    }
+    float pf_avg = (pf_cnt ? pf_sum / pf_cnt : 0.0f);
+
+    meter_ea777_post_event(inst, v, i, p_int, watt_total, freq, pf_avg, total_kwh);
+}
+
+// ===== Task de polling partilhada =====
+static void serial_mdb_ea777_task(void *param)
+{
+    (void)param;
+
+    // pequeno settle antes da 1ª leitura
+    vTaskDelay(pdMS_TO_TICKS(200));
+
+    while (task_should_run)
+    {
+        if (!is_initialized || !ea777_lock)
+        {
+            vTaskDelay(UPDATE_INTERVAL);
+            continue;
+        }
+
+        bool had_instance = false;
+
+        for (uint8_t slot = 0; slot < EA777_MAX_INSTANCES && task_should_run; ++slot)
+        {
+            if (xSemaphoreTake(ea777_lock, EA777_LOCK_TIMEOUT) != pdTRUE)
+            {
+                ESP_LOGW(TAG, "EA777 task timeout waiting lock");
+                continue;
+            }
+
+            ea777_instance_t inst = ea777_instances[slot];
+            if (inst.registered)
+            {
+                had_instance = true;
+                ea777_read_instance_locked(&inst);
+            }
+
+            xSemaphoreGive(ea777_lock);
+        }
+
+        vTaskDelay(had_instance ? UPDATE_INTERVAL : pdMS_TO_TICKS(500));
+    }
+
+    ESP_LOGI(TAG, "EA777 task stopped");
+    meter_task = NULL;
+    vTaskDelete(NULL);
+}
+
+// ===== API pública =====
+// Compatibilidade: chamada antiga inicializa EA777 como GRID/ID 1.
+esp_err_t meter_ea777_init(void)
+{
+    return meter_ea777_grid_init();
+}
+
+esp_err_t meter_ea777_grid_init(void)
+{
+    return ea777_register_instance(EA777_SLOT_GRID);
+}
+
+esp_err_t meter_ea777_evse_init(void)
+{
+    return ea777_register_instance(EA777_SLOT_EVSE);
+}
+
+esp_err_t meter_ea777_start(void)
+{
+    if (!is_initialized)
+    {
+        ESP_LOGE(TAG, "meter_ea777 not initialized");
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    if (!ea777_lock)
+        return ESP_ERR_INVALID_STATE;
+
+    if (xSemaphoreTake(ea777_lock, EA777_LOCK_TIMEOUT) != pdTRUE)
+        return ESP_ERR_TIMEOUT;
+
+    const bool has_instance = ea777_has_registered_instance_locked();
+    esp_err_t desc_err = ESP_OK;
+    if (has_instance)
+        desc_err = ea777_apply_descriptors_locked();
+    xSemaphoreGive(ea777_lock);
+
+    if (!has_instance)
+    {
+        ESP_LOGW(TAG, "meter_ea777 start ignored: no instances registered");
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    if (desc_err != ESP_OK)
+        return desc_err;
+
+    if (meter_task == NULL)
+    {
+        task_should_run = true;
+        BaseType_t ok = xTaskCreate(serial_mdb_ea777_task,
+                                    "meter_ea777_task",
+                                    4096, NULL, 3, &meter_task);
+        if (ok != pdPASS)
+        {
+            task_should_run = false;
+            meter_task = NULL;
+            return ESP_ERR_NO_MEM;
+        }
+        ESP_LOGI(TAG, "meter_ea777 shared task started");
+    }
+
+    return ESP_OK;
+}
+
+esp_err_t meter_ea777_grid_start(void)
+{
+    return meter_ea777_start();
+}
+
+esp_err_t meter_ea777_evse_start(void)
+{
+    return meter_ea777_start();
+}
+
+void meter_ea777_stop(void)
+{
+    meter_ea777_grid_stop();
+}
+
+void meter_ea777_grid_stop(void)
+{
+    ea777_unregister_instance(EA777_SLOT_GRID);
+}
+
+void meter_ea777_evse_stop(void)
+{
+    ea777_unregister_instance(EA777_SLOT_EVSE);
+}

components/meter_manager/driver/meter_modbus/meter_ea777.h

@@ -0,0 +1,61 @@
+#ifndef METER_EA777_H_
+#define METER_EA777_H_
+
+#include <stdint.h>
+#include <stdbool.h>
+#include "esp_err.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * @brief Inicializa o driver EA777 em modo compatível antigo: GRID / slave ID 1.
+ */
+esp_err_t meter_ea777_init(void);
+
+/**
+ * @brief Regista EA777 como meter GRID no slave ID 1.
+ */
+esp_err_t meter_ea777_grid_init(void);
+
+/**
+ * @brief Regista EA777 como meter EVSE no slave ID 2.
+ */
+esp_err_t meter_ea777_evse_init(void);
+
+/**
+ * @brief Inicia a task partilhada de leitura EA777.
+ */
+esp_err_t meter_ea777_start(void);
+
+/**
+ * @brief Inicia a task partilhada de leitura EA777 para GRID.
+ */
+esp_err_t meter_ea777_grid_start(void);
+
+/**
+ * @brief Inicia a task partilhada de leitura EA777 para EVSE.
+ */
+esp_err_t meter_ea777_evse_start(void);
+
+/**
+ * @brief Para/remover EA777 GRID em modo compatível antigo.
+ */
+void meter_ea777_stop(void);
+
+/**
+ * @brief Remove EA777 GRID; só destrói o Modbus master se não houver EVSE registado.
+ */
+void meter_ea777_grid_stop(void);
+
+/**
+ * @brief Remove EA777 EVSE; só destrói o Modbus master se não houver GRID registado.
+ */
+void meter_ea777_evse_stop(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* METER_EA777_H_ */

components/meter_manager/driver/meter_modbus/meter_orno513.c

@@ -8,11 +8,12 @@
 
 #define TAG "serial_mdb_orno513"
 
+
 #define MB_PORT_NUM        2
 #define MB_DEV_SPEED       9600
 #define MB_UART_TXD        17
 #define MB_UART_RXD        16
-#define MB_UART_RTS        5
+#define MB_UART_RTS        2
 #define UPDATE_INTERVAL    (3000 / portTICK_PERIOD_MS)
 #define POLL_INTERVAL      (100 / portTICK_PERIOD_MS)
 
@@ -129,7 +130,7 @@ static void serial_mdb_task(void *param) {
         memcpy(evt.irms, current, sizeof(evt.irms));
         memcpy(evt.watt, watt, sizeof(evt.watt));
 
-        esp_event_post(METER_EVENT, METER_EVENT_DATA_READY, &evt, sizeof(evt), pdMS_TO_TICKS(10));
+        esp_event_post(METER_EVENT, METER_EVENT_DATA_READY, &evt, sizeof(evt), portMAX_DELAY);
 
 
         vTaskDelay(UPDATE_INTERVAL);

components/meter_manager/driver/meter_modbus/meter_orno516.c

@@ -91,7 +91,7 @@ static void meter_orno516_post_event(float *voltage, float *current, int *power)
     memcpy(evt.watt, power, sizeof(evt.watt));
 
     esp_err_t err = esp_event_post(METER_EVENT, METER_EVENT_DATA_READY,
-                                   &evt, sizeof(evt), pdMS_TO_TICKS(10));
+                                   &evt, sizeof(evt), portMAX_DELAY);
 
     if (err != ESP_OK) {
         ESP_LOGW(TAG, "Falha ao emitir evento: %s", esp_err_to_name(err));

components/meter_manager/driver/meter_modbus/meter_orno526.c

@@ -0,0 +1,612 @@
+// components/meter_manager/driver/meter_modbus/meter_orno526.c
+// Driver Modbus RTU/RS485 para ORNO OR-WE-526.
+//
+// Configuração validada em hardware por USB-RS485:
+//   - Slave ID 1
+//   - 9600 baud, 8N1
+//   - FC04 (Input Registers)
+//   - INT32 transmitido no fio como ABCD; nesta versão do esp-modbus,
+//     PARAM_TYPE_I32_CDAB produz o inteiro nativo correto no ESP32.
+//
+// Mapa usado:
+//   0x0100 tensão                 INT32 / 1000 V
+//   0x0102 corrente               INT32 / 1000 A
+//   0x0104 potência ativa         INT32 W
+//   0x0106 potência aparente      INT32 VA
+//   0x0108 potência reativa       INT32 var
+//   0x010A frequência             UINT16 / 10 Hz
+//   0x010B fator de potência      UINT16 / 1000
+//   0x010E energia ativa direta   INT32 / 100 kWh
+//   0x0140 energia reativa total  INT32 / 100 kvarh
+//
+// O OR-WE-526 é monofásico: apenas o índice de fase 0 é preenchido.
+
+#include "meter_orno526.h"
+
+#include "mbcontroller.h"
+#include "meter_events.h"
+
+#include "esp_log.h"
+#include "esp_timer.h"
+#include "driver/uart.h"
+#include "freertos/FreeRTOS.h"
+#include "freertos/task.h"
+
+#include <math.h>
+#include <stdbool.h>
+#include <stdint.h>
+#include <string.h>
+
+#define TAG "serial_mdb_orno526"
+
+// ===== UART / Modbus =====
+#define MB_PORT_NUM 2
+#define MB_DEV_SPEED 9600
+#define MB_UART_TXD 17
+#define MB_UART_RXD 16
+#define MB_UART_RTS 2
+#define ORNO526_SLAVE_ID 1
+
+// ===== Temporizações =====
+#define UPDATE_INTERVAL pdMS_TO_TICKS(3000)
+#define POLL_INTERVAL pdMS_TO_TICKS(100)
+#define STOP_WAIT_STEP pdMS_TO_TICKS(10)
+#define STOP_WAIT_ITERATIONS 200
+
+#define OPTS(minimum, maximum, step_value) \
+    {.opt1 = (minimum), .opt2 = (maximum), .opt3 = (step_value)}
+#define ARRAY_SIZE(array) (sizeof(array) / sizeof((array)[0]))
+
+// ===== Estado =====
+static bool is_initialized = false;
+static volatile bool task_should_run = false;
+static TaskHandle_t meter_task = NULL;
+static const char *meter_source = "GRID";
+
+// ===== CIDs =====
+typedef enum
+{
+    CID_ACTIVE_ENERGY = 0,
+    CID_REACTIVE_ENERGY,
+    CID_ACTIVE_POWER,
+    CID_APPARENT_POWER,
+    CID_REACTIVE_POWER,
+    CID_L1_CURRENT,
+    CID_L1_VOLTAGE,
+    CID_FREQUENCY,
+    CID_POWER_FACTOR,
+    CID_COUNT
+} orno526_cid_t;
+
+#define ORNO526_REQUIRED_MASK               \
+    ((1UL << CID_L1_VOLTAGE) |              \
+     (1UL << CID_L1_CURRENT) |              \
+     (1UL << CID_ACTIVE_POWER))
+
+// ===== Endereços Modbus =====
+#define REG_L1_VOLTAGE 0x0100U
+#define REG_L1_CURRENT 0x0102U
+#define REG_ACTIVE_POWER 0x0104U
+#define REG_APPARENT_POWER 0x0106U
+#define REG_REACTIVE_POWER 0x0108U
+#define REG_FREQUENCY 0x010AU
+#define REG_POWER_FACTOR 0x010BU
+#define REG_FORWARD_ACTIVE_ENERGY 0x010EU
+#define REG_TOTAL_REACTIVE_ENERGY 0x0140U
+
+// A documentação mostra ABCD no fio. Tal como validado noutros drivers deste
+// projeto, o tipo CDAB do esp-modbus faz a conversão correta para o host ESP32.
+#ifndef ORNO526_I32_PARAM_TYPE
+#define ORNO526_I32_PARAM_TYPE PARAM_TYPE_I32_CDAB
+#endif
+
+// param_offset fica a zero porque cada leitura usa um buffer local alinhado.
+static const mb_parameter_descriptor_t device_parameters_orno526[CID_COUNT] = {
+    {CID_ACTIVE_ENERGY, "Forward Active Energy", "kWh", ORNO526_SLAVE_ID,
+     MB_PARAM_INPUT, REG_FORWARD_ACTIVE_ENERGY, 2, 0,
+     ORNO526_I32_PARAM_TYPE, 4, OPTS(0, 2147483647, 1), PAR_PERMS_READ},
+
+    {CID_REACTIVE_ENERGY, "Total Reactive Energy", "kvarh", ORNO526_SLAVE_ID,
+     MB_PARAM_INPUT, REG_TOTAL_REACTIVE_ENERGY, 2, 0,
+     ORNO526_I32_PARAM_TYPE, 4, OPTS(0, 2147483647, 1), PAR_PERMS_READ},
+
+    {CID_ACTIVE_POWER, "Active Power", "W", ORNO526_SLAVE_ID,
+     MB_PARAM_INPUT, REG_ACTIVE_POWER, 2, 0,
+     ORNO526_I32_PARAM_TYPE, 4, OPTS(-100000, 100000, 1), PAR_PERMS_READ},
+
+    {CID_APPARENT_POWER, "Apparent Power", "VA", ORNO526_SLAVE_ID,
+     MB_PARAM_INPUT, REG_APPARENT_POWER, 2, 0,
+     ORNO526_I32_PARAM_TYPE, 4, OPTS(0, 100000, 1), PAR_PERMS_READ},
+
+    {CID_REACTIVE_POWER, "Reactive Power", "var", ORNO526_SLAVE_ID,
+     MB_PARAM_INPUT, REG_REACTIVE_POWER, 2, 0,
+     ORNO526_I32_PARAM_TYPE, 4, OPTS(-100000, 100000, 1), PAR_PERMS_READ},
+
+    {CID_L1_CURRENT, "L1 Current", "A", ORNO526_SLAVE_ID,
+     MB_PARAM_INPUT, REG_L1_CURRENT, 2, 0,
+     ORNO526_I32_PARAM_TYPE, 4, OPTS(-100000, 100000, 1), PAR_PERMS_READ},
+
+    {CID_L1_VOLTAGE, "L1 Voltage", "V", ORNO526_SLAVE_ID,
+     MB_PARAM_INPUT, REG_L1_VOLTAGE, 2, 0,
+     ORNO526_I32_PARAM_TYPE, 4, OPTS(0, 300000, 1), PAR_PERMS_READ},
+
+    {CID_FREQUENCY, "Frequency", "Hz", ORNO526_SLAVE_ID,
+     MB_PARAM_INPUT, REG_FREQUENCY, 1, 0,
+     PARAM_TYPE_U16, 2, OPTS(0, 1000, 1), PAR_PERMS_READ},
+
+    {CID_POWER_FACTOR, "Power Factor", "", ORNO526_SLAVE_ID,
+     MB_PARAM_INPUT, REG_POWER_FACTOR, 1, 0,
+     PARAM_TYPE_U16, 2, OPTS(0, 1000, 1), PAR_PERMS_READ},
+};
+
+static bool orno526_is_16bit_cid(uint16_t cid)
+{
+    return cid == CID_FREQUENCY || cid == CID_POWER_FACTOR;
+}
+
+static bool orno526_value_is_valid(uint16_t cid, float value)
+{
+    if (!isfinite(value))
+        return false;
+
+    switch (cid)
+    {
+    case CID_ACTIVE_ENERGY:
+    case CID_REACTIVE_ENERGY:
+        return value >= 0.0f && value <= 10000000.0f;
+
+    case CID_ACTIVE_POWER:
+    case CID_REACTIVE_POWER:
+        return value >= -100000.0f && value <= 100000.0f;
+
+    case CID_APPARENT_POWER:
+        return value >= 0.0f && value <= 100000.0f;
+
+    case CID_L1_CURRENT:
+        return value >= -100.0f && value <= 100.0f;
+
+    case CID_L1_VOLTAGE:
+        return value >= 0.0f && value <= 300.0f;
+
+    case CID_FREQUENCY:
+        return value >= 0.0f && value <= 100.0f;
+
+    case CID_POWER_FACTOR:
+        return value >= 0.0f && value <= 1.1f;
+
+    default:
+        return false;
+    }
+}
+
+static float orno526_scale_i32(uint16_t cid, int32_t raw)
+{
+    switch (cid)
+    {
+    case CID_L1_VOLTAGE:
+    case CID_L1_CURRENT:
+        return (float)raw / 1000.0f;
+
+    case CID_ACTIVE_ENERGY:
+    case CID_REACTIVE_ENERGY:
+        return (float)raw / 100.0f;
+
+    case CID_ACTIVE_POWER:
+    case CID_APPARENT_POWER:
+    case CID_REACTIVE_POWER:
+    default:
+        return (float)raw;
+    }
+}
+
+static float orno526_scale_u16(uint16_t cid, uint16_t raw)
+{
+    switch (cid)
+    {
+    case CID_FREQUENCY:
+        return (float)raw / 10.0f;
+
+    case CID_POWER_FACTOR:
+        return (float)raw / 1000.0f;
+
+    default:
+        return (float)raw;
+    }
+}
+
+static void serial_mdb_task(void *param)
+{
+    (void)param;
+
+    while (task_should_run)
+    {
+        float voltage[3] = {0.0f, 0.0f, 0.0f};
+        float current[3] = {0.0f, 0.0f, 0.0f};
+        int32_t watt[3] = {0, 0, 0};
+
+        float frequency_hz = 0.0f;
+        float power_factor = 0.0f;
+        float active_energy_kwh = 0.0f;
+        float reactive_energy_kvarh = 0.0f;
+        float apparent_power_va = 0.0f;
+        float reactive_power_var = 0.0f;
+
+        uint32_t valid_mask = 0U;
+
+        for (uint16_t cid = 0; cid < CID_COUNT && task_should_run; ++cid)
+        {
+            const mb_parameter_descriptor_t *desc = NULL;
+            esp_err_t err = mbc_master_get_cid_info(cid, &desc);
+            if (err != ESP_OK || !desc)
+            {
+                ESP_LOGE(TAG, "%s get_cid_info(%u) failed: %s",
+                         meter_source, (unsigned)cid, esp_err_to_name(err));
+                continue;
+            }
+
+            int32_t raw_i32 = 0;
+            uint16_t raw_u16 = 0;
+            void *data_ptr = orno526_is_16bit_cid(cid)
+                                 ? (void *)&raw_u16
+                                 : (void *)&raw_i32;
+
+            uint8_t type = 0;
+            err = mbc_master_get_parameter(cid,
+                                           (char *)desc->param_key,
+                                           (uint8_t *)data_ptr,
+                                           &type);
+            if (err != ESP_OK)
+            {
+                ESP_LOGE(TAG, "%s CID %u (%s) read failed: %s",
+                         meter_source,
+                         (unsigned)cid,
+                         desc->param_key,
+                         esp_err_to_name(err));
+                vTaskDelay(POLL_INTERVAL);
+                continue;
+            }
+
+            const float value = orno526_is_16bit_cid(cid)
+                                    ? orno526_scale_u16(cid, raw_u16)
+                                    : orno526_scale_i32(cid, raw_i32);
+
+            if (!orno526_value_is_valid(cid, value))
+            {
+                if (orno526_is_16bit_cid(cid))
+                {
+                    ESP_LOGW(TAG,
+                             "%s %s invalid: raw=0x%04X value=%.6f",
+                             meter_source,
+                             desc->param_key,
+                             (unsigned)raw_u16,
+                             (double)value);
+                }
+                else
+                {
+                    ESP_LOGW(TAG,
+                             "%s %s invalid: raw=%ld (0x%08lX) value=%.6f",
+                             meter_source,
+                             desc->param_key,
+                             (long)raw_i32,
+                             (unsigned long)(uint32_t)raw_i32,
+                             (double)value);
+                }
+
+                vTaskDelay(POLL_INTERVAL);
+                continue;
+            }
+
+            valid_mask |= (1UL << cid);
+
+            ESP_LOGD(TAG, "%s %s: %.3f %s",
+                     meter_source,
+                     desc->param_key,
+                     (double)value,
+                     desc->param_units);
+
+            switch (cid)
+            {
+            case CID_ACTIVE_ENERGY:
+                active_energy_kwh = value;
+                break;
+
+            case CID_REACTIVE_ENERGY:
+                reactive_energy_kvarh = value;
+                break;
+
+            case CID_ACTIVE_POWER:
+                watt[0] = (int32_t)lrintf(value);
+                break;
+
+            case CID_APPARENT_POWER:
+                apparent_power_va = value;
+                break;
+
+            case CID_REACTIVE_POWER:
+                reactive_power_var = value;
+                break;
+
+            case CID_L1_CURRENT:
+                // irms deve ser não negativo; o sentido é representado pela potência.
+                current[0] = fabsf(value);
+                break;
+
+            case CID_L1_VOLTAGE:
+                voltage[0] = value;
+                break;
+
+            case CID_FREQUENCY:
+                frequency_hz = value;
+                break;
+
+            case CID_POWER_FACTOR:
+                power_factor = value;
+                break;
+
+            default:
+                break;
+            }
+
+            vTaskDelay(POLL_INTERVAL);
+        }
+
+        if (!task_should_run)
+            break;
+
+        if ((valid_mask & ORNO526_REQUIRED_MASK) != ORNO526_REQUIRED_MASK)
+        {
+            ESP_LOGW(TAG,
+                     "%s incomplete OR-WE-526 sample, mask=0x%03lX",
+                     meter_source,
+                     (unsigned long)valid_mask);
+            vTaskDelay(UPDATE_INTERVAL);
+            continue;
+        }
+
+        meter_event_data_t evt = {
+            .source = meter_source,
+            .watt_total = watt[0],
+            .frequency = frequency_hz,
+            .power_factor = power_factor,
+            .total_energy = active_energy_kwh,
+            .timestamp_us = esp_timer_get_time(),
+        };
+
+        memcpy(evt.vrms, voltage, sizeof(evt.vrms));
+        memcpy(evt.irms, current, sizeof(evt.irms));
+        memcpy(evt.watt, watt, sizeof(evt.watt));
+
+        ESP_LOGI(TAG,
+                 "%s OR-WE-526 event: V=%.3fV I=%.3fA P=%ldW "
+                 "S=%.0fVA Q=%.0fvar E=%.2fkWh Er=%.2fkvarh "
+                 "Hz=%.2f PF=%.3f mask=0x%03lX",
+                 meter_source,
+                 (double)voltage[0],
+                 (double)current[0],
+                 (long)evt.watt_total,
+                 (double)apparent_power_va,
+                 (double)reactive_power_var,
+                 (double)active_energy_kwh,
+                 (double)reactive_energy_kvarh,
+                 (double)frequency_hz,
+                 (double)power_factor,
+                 (unsigned long)valid_mask);
+
+        esp_err_t post_err = esp_event_post(METER_EVENT,
+                                            METER_EVENT_DATA_READY,
+                                            &evt,
+                                            sizeof(evt),
+                                            portMAX_DELAY);
+        if (post_err != ESP_OK)
+        {
+            ESP_LOGW(TAG, "%s failed to post meter event: %s",
+                     meter_source, esp_err_to_name(post_err));
+        }
+
+        vTaskDelay(UPDATE_INTERVAL);
+    }
+
+    ESP_LOGI(TAG, "OR-WE-526 task stopped");
+    meter_task = NULL;
+    vTaskDelete(NULL);
+}
+
+static esp_err_t meter_orno526_init_common(const char *source)
+{
+    if (!source)
+        return ESP_ERR_INVALID_ARG;
+
+    if (is_initialized)
+    {
+        if (strcmp(meter_source, source) == 0)
+            return ESP_OK;
+
+        ESP_LOGE(TAG,
+                 "OR-WE-526 already initialized as %s; cannot reinitialize as %s",
+                 meter_source,
+                 source);
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    meter_source = source;
+    ESP_LOGI(TAG, "meter_orno526 init as %s", meter_source);
+
+    mb_communication_info_t comm = {
+        .port = MB_PORT_NUM,
+        .mode = MB_MODE_RTU,
+        .baudrate = MB_DEV_SPEED,
+        .parity = UART_PARITY_DISABLE, // Validado: 9600 8N1
+    };
+
+    void *handler = NULL;
+    esp_err_t err = mbc_master_init(MB_PORT_SERIAL_MASTER, &handler);
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "mbc_master_init failed: %s", esp_err_to_name(err));
+        return err;
+    }
+
+    err = mbc_master_setup(&comm);
+    if (err != ESP_OK)
+        goto fail_destroy_master;
+
+    err = uart_set_pin(MB_PORT_NUM,
+                       MB_UART_TXD,
+                       MB_UART_RXD,
+                       MB_UART_RTS,
+                       UART_PIN_NO_CHANGE);
+    if (err != ESP_OK)
+        goto fail_destroy_master;
+
+    err = uart_set_word_length(MB_PORT_NUM, UART_DATA_8_BITS);
+    if (err != ESP_OK)
+        goto fail_destroy_master;
+
+    err = uart_set_hw_flow_ctrl(MB_PORT_NUM, UART_HW_FLOWCTRL_DISABLE, 0);
+    if (err != ESP_OK)
+        goto fail_destroy_master;
+
+    err = uart_set_stop_bits(MB_PORT_NUM, UART_STOP_BITS_1);
+    if (err != ESP_OK)
+        goto fail_destroy_master;
+
+    err = mbc_master_start();
+    if (err != ESP_OK)
+        goto fail_destroy_master;
+
+    // O driver UART é instalado por mbc_master_start(); só depois ativamos RS485.
+    err = uart_set_mode(MB_PORT_NUM, UART_MODE_RS485_HALF_DUPLEX);
+    if (err != ESP_OK)
+        goto fail_destroy_master;
+
+    vTaskDelay(pdMS_TO_TICKS(20));
+
+    err = mbc_master_set_descriptor(device_parameters_orno526,
+                                    ARRAY_SIZE(device_parameters_orno526));
+    if (err != ESP_OK)
+    {
+        ESP_LOGE(TAG, "mbc_master_set_descriptor failed: %s",
+                 esp_err_to_name(err));
+        goto fail_destroy_master;
+    }
+
+    // Reduz para INFO/WARN em produção, se necessário.
+    esp_log_level_set("MB_CONTROLLER_MASTER", ESP_LOG_DEBUG);
+    esp_log_level_set("MB_PORT_COMMON", ESP_LOG_DEBUG);
+    esp_log_level_set("MB_SERIAL_MASTER", ESP_LOG_DEBUG);
+
+    is_initialized = true;
+    return ESP_OK;
+
+fail_destroy_master:
+    ESP_LOGE(TAG, "OR-WE-526 initialization failed: %s", esp_err_to_name(err));
+    (void)mbc_master_destroy();
+    if (uart_is_driver_installed(MB_PORT_NUM))
+        (void)uart_driver_delete(MB_PORT_NUM);
+    return err;
+}
+
+esp_err_t meter_orno526_init(void)
+{
+    return meter_orno526_grid_init();
+}
+
+esp_err_t meter_orno526_grid_init(void)
+{
+    return meter_orno526_init_common("GRID");
+}
+
+esp_err_t meter_orno526_evse_init(void)
+{
+    return meter_orno526_init_common("EVSE");
+}
+
+esp_err_t meter_orno526_start(void)
+{
+    if (!is_initialized)
+    {
+        ESP_LOGE(TAG, "meter_orno526 not initialized");
+        return ESP_ERR_INVALID_STATE;
+    }
+
+    if (meter_task != NULL)
+        return ESP_OK;
+
+    task_should_run = true;
+    BaseType_t ok = xTaskCreate(serial_mdb_task,
+                                "meter_orno526_task",
+                                4096,
+                                NULL,
+                                3,
+                                &meter_task);
+    if (ok != pdPASS)
+    {
+        task_should_run = false;
+        meter_task = NULL;
+        ESP_LOGE(TAG, "Failed to create OR-WE-526 task");
+        return ESP_ERR_NO_MEM;
+    }
+
+    ESP_LOGI(TAG, "OR-WE-526 %s task started", meter_source);
+    return ESP_OK;
+}
+
+esp_err_t meter_orno526_grid_start(void)
+{
+    return meter_orno526_start();
+}
+
+esp_err_t meter_orno526_evse_start(void)
+{
+    return meter_orno526_start();
+}
+
+void meter_orno526_stop(void)
+{
+    if (!is_initialized)
+        return;
+
+    ESP_LOGI(TAG, "Stopping OR-WE-526 %s", meter_source);
+
+    task_should_run = false;
+
+    for (int i = 0; i < STOP_WAIT_ITERATIONS && meter_task != NULL; ++i)
+        vTaskDelay(STOP_WAIT_STEP);
+
+    if (meter_task != NULL)
+    {
+        ESP_LOGW(TAG, "OR-WE-526 task did not stop in time; deleting it");
+        vTaskDelete(meter_task);
+        meter_task = NULL;
+    }
+
+    esp_err_t err = mbc_master_destroy();
+    if (err != ESP_OK)
+    {
+        ESP_LOGW(TAG, "mbc_master_destroy returned %s",
+                 esp_err_to_name(err));
+    }
+
+    if (uart_is_driver_installed(MB_PORT_NUM))
+    {
+        err = uart_driver_delete(MB_PORT_NUM);
+        if (err != ESP_OK)
+        {
+            ESP_LOGW(TAG, "uart_driver_delete returned %s",
+                     esp_err_to_name(err));
+        }
+    }
+
+    is_initialized = false;
+    meter_source = "GRID";
+}
+
+void meter_orno526_grid_stop(void)
+{
+    meter_orno526_stop();
+}
+
+void meter_orno526_evse_stop(void)
+{
+    meter_orno526_stop();
+}

components/meter_manager/driver/meter_modbus/meter_orno526.h

@@ -0,0 +1,58 @@
+#pragma once
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include "esp_err.h"
+
+/**
+ * @brief Compatibilidade: inicializa OR-WE-526 como meter GRID (slave ID 1).
+ */
+esp_err_t meter_orno526_init(void);
+
+/**
+ * @brief Inicializa OR-WE-526 como meter GRID (slave ID 1).
+ */
+esp_err_t meter_orno526_grid_init(void);
+
+/**
+ * @brief Inicializa OR-WE-526 como meter EVSE (slave ID 1).
+ *
+ * O driver suporta uma única instância OR-WE-526 de cada vez.
+ */
+esp_err_t meter_orno526_evse_init(void);
+
+/**
+ * @brief Inicia a task de aquisição OR-WE-526.
+ */
+esp_err_t meter_orno526_start(void);
+
+/**
+ * @brief Alias de start para utilização como GRID.
+ */
+esp_err_t meter_orno526_grid_start(void);
+
+/**
+ * @brief Alias de start para utilização como EVSE.
+ */
+esp_err_t meter_orno526_evse_start(void);
+
+/**
+ * @brief Para a task e destrói o master Modbus/UART.
+ */
+void meter_orno526_stop(void);
+
+/**
+ * @brief Alias de stop para utilização como GRID.
+ */
+void meter_orno526_grid_stop(void);
+
+/**
+ * @brief Alias de stop para utilização como EVSE.
+ */
+void meter_orno526_evse_stop(void);
+
+#ifdef __cplusplus
+}
+#endif