new meter

components/meter_manager/driver/meter_orno/modbus_params.h

@@ -4,83 +4,72 @@
  * SPDX-License-Identifier: Apache-2.0
  */
 
-/*=====================================================================================
- * Description:
- *   The Modbus parameter structures used to define Modbus instances that
- *   can be addressed by Modbus protocol. Define these structures per your needs in
- *   your application. Below is just an example of possible parameters.
- *====================================================================================*/
 #ifndef _DEVICE_PARAMS
 #define _DEVICE_PARAMS
 
 #include <stdint.h>
 
-// This file defines structure of modbus parameters which reflect correspond modbus address space
-// for each modbus register type (coils, discreet inputs, holding registers, input registers)
 #pragma pack(push, 1)
-typedef struct
-{
-    uint8_t discrete_input0:1;
-    uint8_t discrete_input1:1;
-    uint8_t discrete_input2:1;
-    uint8_t discrete_input3:1;
-    uint8_t discrete_input4:1;
-    uint8_t discrete_input5:1;
-    uint8_t discrete_input6:1;
-    uint8_t discrete_input7:1;
+
+// Discrete Inputs
+typedef struct {
+    uint8_t discrete_input0 : 1;
+    uint8_t discrete_input1 : 1;
+    uint8_t discrete_input2 : 1;
+    uint8_t discrete_input3 : 1;
+    uint8_t discrete_input4 : 1;
+    uint8_t discrete_input5 : 1;
+    uint8_t discrete_input6 : 1;
+    uint8_t discrete_input7 : 1;
     uint8_t discrete_input_port1;
     uint8_t discrete_input_port2;
 } discrete_reg_params_t;
-#pragma pack(pop)
 
-#pragma pack(push, 1)
-typedef struct
-{
+// Coils
+typedef struct {
     uint8_t coils_port0;
     uint8_t coils_port1;
     uint8_t coils_port2;
 } coil_reg_params_t;
-#pragma pack(pop)
 
-#pragma pack(push, 1)
-typedef struct
-{
-    float input_data0; // 0
-    float input_data1; // 2
-    float input_data2; // 4
-    float input_data3; // 6
-    uint16_t data[150]; // 8 + 150 = 158
-    float input_data4; // 158
+// Input Registers (pode manter caso use em outro driver)
+typedef struct {
+    float input_data0;
+    float input_data1;
+    float input_data2;
+    float input_data3;
+    uint16_t data[150];
+    float input_data4;
     float input_data5;
     float input_data6;
     float input_data7;
     uint16_t data_block1[150];
 } input_reg_params_t;
-#pragma pack(pop)
 
-#pragma pack(push, 1)
-typedef struct
-{
-    uint32_t holding_data0;
-    uint32_t holding_data1;
-    uint32_t holding_data2;
-    uint32_t holding_data3;
-    uint32_t holding_data4;
-    uint32_t holding_data5;
-    uint32_t holding_data6;
-    uint32_t holding_data7;
-    uint32_t holding_data8;
-    uint32_t holding_data9;
-    uint32_t holding_data10;
-    uint32_t holding_data11;
-    uint32_t holding_data12;
-    uint32_t holding_data13;
+// Holding Registers (ajustado para os campos usados no ORNO 516)
+typedef struct {
+    float l1_current;          // 0x0016
+    float l2_current;          // 0x0018
+    float l3_current;          // 0x001A
+
+    float l1_voltage;          // 0x000E
+    float l2_voltage;          // 0x0010
+    float l3_voltage;          // 0x0012
+
+    float total_active_power;  // 0x001C
+    float total_reactive_power;
+    float active_power;
+    float apparent_power;
+    float reactive_power;
 } holding_reg_params_t;
+
+
 #pragma pack(pop)
 
+// Instâncias globais das estruturas
 extern holding_reg_params_t holding_reg_params;
 extern input_reg_params_t input_reg_params;
 extern coil_reg_params_t coil_reg_params;
 extern discrete_reg_params_t discrete_reg_params;
 
-#endif // !defined(_DEVICE_PARAMS)
+#endif // !_DEVICE_PARAMS